MM-94B


Motor-drive Manipulator (Add On)

MM-94B:  $3,816.22
MM-94B is an add-on type manipulator for left-side use of the MM-94, and it can be used sharing the same control unit of MM-94. Adding the MM-94B to your MM-94 setup will enable motor drive operation on both sides.

MM-94 Control Unit
Since the MM-94B does not include the control unit, MM-94 is required to use MM-94B.



Specification
Accessories included Hex Wrench
Movement range Coarse X22mm, Y22mm, Z22mm
Driving speed X/Y Axis 1.4mm/s (with use of high-speed button)
Maximum speed 0.7mm/s (with use of speed adjusting knob)
Minimum speed 0.1mm/s (with use of speed adjusting knob)
Z Axis2.8mm/s (with use of high-speed button)
Maximum speed 1.4mm/s (with use of speed adjusting knob)
Minimum speed 0.2mm/s (with use of speed adjusting knob)
Power consumption Approx. 10W
Dimensions/Weight
Controller W70 x D100 x H120mm, 530g, Connecting cable (1.2m)
Drive unit W85 x D112 x H144mm, 591g, Connecting cable (1.2m)

† These are our list prices. If you are paying with an Institutional Purchase Order or by check, you qualify for a 7.5% discount. Click here to change your payment method and see the lower prices.