Head Holding Device (with Angle Adjuster / for Mice)

MAG-3:  $5,189.19 - Ships in 5-7 Days
* Attachable chambers: CF-10, CP, CP-1, CP-2

For observations of a mouse under a microscope.

The MAG3 can be transferred and placed under a microscope or other experimental instrument for performing to observe and experiment on mice, after attaching a chamber onto the head of a mouse on the SR-9M-HT Stereotaxic Instrument, .
The MAG-3 can be placed under a stereomicroscope, and is most suitable for in vivo observation/imaging experiments. It is equipped with angle adjusters for obtaining deeper images. It is slightly bigger than the MAG-2 but can be inclined at a steeper angle which is useful for making an approach to the temporal region of the head.

In the photo, MAG-3 is shown holding a CP-1 mounting plate (that is sometimes attached to the animal with temporary or permanent dental cement).

Angle of Inclination
Longitudinal inclination (± 10°)
Longitudinal inclination
Lateral inclination (± 15°)
Accessories includedCP-1 Chamber Plate (one each)
CP-2 Chamber Plate (one each)
Vinyl Sheet
Dimensions/WeightW108 x D152 x H109 ~ 130mm, 1.7Kg
Maximum angle of inclinationLongitudinal± 15°
Lateral± 20°
Load-bearing Capacity2kg

* The chamber frame is customizable to your own application. Please contact us for details.
* The CFR-1 Chamber Frame (for rats) can NOT be attached.

MAG-3 system diagram

† These are our list prices. If you are paying with an Institutional Purchase Order or by check, you qualify for a 7.5% discount. Click here to change your payment method and see the lower prices.