Single Stage Glass Microelectrode Puller

PP-830:  $2,378.38 - Discontinued
This model has been discontinued and replaced by the similar, but more full-featured PC-10.

Vertical Pull Type for producing microelectrodes and performing double mode pulling.

The method used by this puller is to pull the glass capillary vertically, using the gravitational force of its own weight.  For more versatility, two modes are provided: a single pull, which pulls at one stretch, and a double pull in which the setting is changed in mid-process.  The PP-830 can therefore produce firm microelectrodes for patch clamping (its main purpose) as well as long, thin microelectrodes for intracytoplasmic sperm injection.  To save on cost, production in the double mode is by the conventional method of moving the heater manually and arresting the first step by means of the stopper.  Digital values, with the maximum output of the electromagnet and heater represented as 100, are shown on the display and the heater output is continually increased, making accurate mass production easier.  This puller has several simple features to enhance ease of use, such as the employment of two weights (light and heavy) for tension adjustment.

Accessories included GD-1 Glass Capillary with filament, Spare Heater,
Power Supply Cable
Power source AC100V(+-5%), AC120V(+-5%),
AC220V(+-5%), AC240V(+-5%)
Power cosumption Approx. 80W
Heater level 100 = heater voltage 2.5V
Weight Approx. 25g x 2, Approx. 100g x 2
Dimensions/Weight W205 x D190 x H185mm, 6.0kg

Model Product Description
PC-10H Heater Kanthal wire (x5)

† These are our list prices. If you are paying with an Institutional Purchase Order or by check, you qualify for a 7.5% discount. Click here to change your payment method and see the lower prices.

Tritech Research, Inc. 2961 Veteran Avenue, Los Angeles, CA 90064
telephone: (310) 446-4460 • facsimile (310) 475-1533 •(1-800) toll free:7-333-TRI • email: info@tritechresearch.com