Cannula holder for SMM series

(Click to see larger image)

Cannula Holder for SMM series

This holder is intended to hold a cannula within 3.4mm and 3.5mm O.D. on SMM series. The upper tip of the cannula is visible when affixed - thus it is easy to confirm proper insertion of the cannula. The holding section can be detached from the shaft and changed in orientation (Left-right). Comparatively to SHC-1, the products differ in the diameter of the shaft and the way the cannula is held. (SMM-HC has the shaft with 8mm O.D., and the cannula won't be affixed from the top without covering the upper side of cannula - thus a T-shaped cannula can be affixed as well).
The above photo shows the setting example for SR-5M-HT+ SM-100 + SMM-HC.

Setting example of T-shaped cannula

Holders for SMM Series



Model	SMM-A	SMM-HA	SMM-HB	SMM-HC	SMM-HD



Specifications



Dimensions/Weight	W29 × D8 × H206mm, 90g

† These are our list prices. If you are paying with an Institutional Purchase Order or by check, you qualify for a 7.5% discount. Click here to change your payment method and see the lower prices.