Narishige's M-152 is a three-dimensional coarse manual manipulator with simple design. This compact, lightweight model offers coarse manipulation only and is very simple to use. A bar mount is provided to enable installation by either a mounting adaptor or magnetic stand.
When used in conjunction with a micromanipulator such as the MMO-220C, quick three-dimensional operation is possible in low magnification experiments using a stereo microscope.
*For attachment to the microscope, P-1A height adjustment plate (not included) and a suitable adaptor is required (standard accessories).
*The ball joint that attaches the micromanipulator can be replaced by MMO-220C single-axis oil hydraulic micromanipulator (sold separately). *A needle holder, such as our MINJ-4, Narishige's HI-7, H-7 or HI-9, also needs to be purchased separately.
Specification
Accessories included
B-8B Ball Joint
Movement range
Coarse
X25mm, Y20mm, Z25mm
Dimensions/Weight
W95 x D90 x H110mm, 320g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Compact Three-Axis Coarse Micromanipulator
M-3:
$940.54
†
- Special Order - Pricing Available Upon Request
Narishige's M-3 is a simple manipulator offering only three-dimensional coarse movement. Designed for simplicity and ease of use, this model has scales on the X- and Y-axes for reading positions, and can use 7 -14mm holders.
*Use GJ-8 magnetic stand or equivalent equipment to attach this model.
Specification
Accessories
H-1 Electrode Holder, Clamp Rod, Allen Wrench
Movement range
Coarse
X40mm, Y30mm, Z30mm
Dimensions/Weight
W130 x D130 x H80mm, 400g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Thin Three-Axis Coarse/Fine Micromanipulator
M-3333:
$1,470.27
†
- Ships in 1-5 days
Narishige's M-3333 is a thin three-axis coarse/fine micromanipulator. To enable recording from multiple microelectrodes, the body of this model is made as thin as possible, with all the handles positioned in a single direction. Use of the X-Rotating X-Blocks (sold separately), makes it possible to place many microelectrodes close together without taking up too much space.It is of course possible to mount a single-axis fine movement unit on the X-axis for a more careful approach to the specimen.
*Use X-4 X-blocks and GJ-8 magnetic stand or equivalent equipment to attach this model.
*Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 enables remote controlled X-axis fine movement.
Specification
Accessories included
H-1 Electrode Holder, Allen Wrench
Movement range
Coarse
X40mm, Y12mm, Z30mm
Fine
X7mm, Full rotation of knob: 250um Minimum graduation: 10um
Dimensions/Weight
W126 x D43 x H145mm, 340g
FAQ's
Q: What are the dimensions of the mounting bar on the M-3333? Is there a magnetic stand that can hold it effectively?
A: The mounting bar on the M-3333 is 12mm in diameter and about 25mm long. We offer magnetic stands that can accommodate a 12mm mounting bar, including the GJ-8.
However, it is generally inconvenient to directly mount the M-3333 directly to the GJ-8's upper cross-clamp, and restrict how you position the manipulator since it would be sitting directly over the magnetic base instead of out and away from it.
To remedy this issue we recommend the X-4 rotating X-block in conjunction with either the GJ-1 or preferably the GJ-8, which provides additional weight and stability.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Narishige's MN-151 is a lightweight, 3-axis mechanical micromanipulator which has coarse movements in the X, Y, and Z directions. In addition to the 3 coarse axes of movement, the MN-151 also incorporates fine, joystick-controlled movements in the X-Y plane. A knob with 5 um gradations provides fine mechanical movement in the Z axis. The MN-151 is very versatile, and can be mounted in a variety of orientations on both the left and right sides of a microscope stage. It can be used to manipulate the primary needle holder in applications such as Drosophila, C. elegans, Xenopus, and Zebrafish microinjection. It also can be used in other applications such as mammalian oocyte microinjection, where it can be used as a versatile holding-pipette manipulator and for Yeast Tetrad microdissection. *Please note that the P-1A Height Adjustment Plate (not included) is required to attach the MN-151 to Narishige's bracket systems. A needle holder, such as our MINJ-4, Narishige's HI-7, H-7 or HI-9, also needs to be purchased separately.
Specification
Accessories included
B-8B Ball Joint
Movement range
Coarse
X25mm, Y20mm, Z25mm
Fine movement: Z axis 8mm Full rotation of fine knob 500um Minimum graduation 5um
Joystick control 1:150 - 1:15 (X-Y plane movement ratio)
Dimensions/Weight
W95 x D90 x H110mm, 470g
FAQ's
Q: What are the main differences between the MN-151 and MN-153 micro manipulators?
A: MN-153 and MN-151 both have 3-axis course movement. MN-153 has an additional fine movement in the X-axis (the direction toward the sample) and no fine movement in Y or Z. MN-151 has an additional fine movement in the Z-axis (lowering down to the same plane as the sample) plus it has the joystick for fine, coordinated movement in X and Y. If you move the joystick left and right, the needle moves towards and away from the sample, respectively. If you move the joystick toward you or away from your, the needle moves toward you and away from you in the Y axis, respectively. The MN-151 makes it easier to line up the needle before injection. However, the biggest advantage is that the needle moves at a speed proportional to the speed you move the joystick, so it is easier to make the needle pierce the eggs.
Q: What are the types of mounting adapter needed to attach the MN-151 to the scope? Does the mounting adaptor attach below or behind the stage?
A: The NZ-19-2 mounts on the illumination pillar, not onto the stage. This makes it really easy to change samples, because on your scope, you can set it so that you can tilt the pillar toward the back, which will cause the micromanipulator to lift up and out of the way. The NZ-19-2 goes out to the side, NR2 goes up, and the MN-151 includes a P-1A bracket to come back toward you with a bar to mount the micromanipulator.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Narishige's MN-153 is a three axis coarse/fine direct drive micromanipulator with the capability of fine movement on the X-axis, enabling accurate linear approach to the cell with no danger of causing it any serious damage. Employment of the bar mount system provides complete installation flexibility and greatly broadens the range of possible applications.
*For attachment to the microscope, P-1A height adjustment plate (not included) and a suitable adaptor is required (standard accessories). *The ball joint that attaches the micromanipulator can be replaced by MMO-220A single-axis oil hydraulic micromanipulator (sold separately). *A needle holder, such as our MINJ-4, Narishige's HI-7, H-7 or HI-9, also needs to be purchased separately.
Specification
Accessories included
B-8B Ball Joint
Movement range
Coarse
X25mm, Y20mm, Z25mm
Fine
X8mm Full rotation of knob 250µm Minimum graduation 5µm
Dimensions/Weight
W105 x D36 x H145mm, 330g
FAQ's
Q: What are the main differences between the MN-151 and MN-153 micro manipulators?
A: MN-153 and MN-151 both have 3-axis course movement. MN-153 has an additional fine movement in the X-axis (the direction toward the sample) and no fine movement in Y or Z. MN-151 has an additional fine movement in the Z-axis (lowering down to the same plane as the sample) plus it has the joystick for fine, coordinated movement in X and Y. If you move the joystick left and right, the needle moves towards and away from the sample, respectively. If you move the joystick toward you or away from your, the needle moves toward you and away from you in the Y axis, respectively. The MN-151 makes it easier to line up the needle before injection. However, the biggest advantage is that the needle moves at a speed proportional to the speed you move the joystick, so it is easier to make the needle pierce the eggs.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Coarse Micromanipulator
MN-3333:
$1,189.19
†
- Special Order
Narishige's MN-3333 is a three axis coarse micromanipulator designed as thin as possible to enable recording with multiple microelectrodes. The X-4 Rotating X-Blocks (sold separately) can be used to place many microelectrodes close together without occupying too much space.
*Use X-4 X-blocks and GJ-8 magnetic stand or equivalent equipment to attach this model. *Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 enables remote controlled X axis fine movement.
Specification
Accessories
H-1 Electrode Holder, Allen Wrench
Movement range
Coarse
X40mm, Y12mm, Z30mm
Dimensions/Weight
W126 x D43 x H125mm, 260g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Oil Hydraulic Micromanipulators
Single-Axis Oil Hydraulic Fine Micromanipulator and Three-axis Coarse Micromanipulator
MO-150:
$3,513.51
†
- Discontinued
Narishige's MO-150 is an oil hydraulic single-axis fine micromanipulator capable of approaching the specimen without vibration. Based on the M-152, this version adds the capability of oil hydraulic fine movement on the X-axis, enabling accurate, vibration-free linear approach to the cell with no danger of causing it any serious damage. Employment of the bar mount system provides complete installation flexibility and greatly broadens the range of possible applications.
*For attachment to the microscope, P-1A height adjustment plate (sold separately) and a suitable adaptor is required (standard accessories). *Attached universal joint can be replaced by the MMO-220A single-axis oil hydraulic micromanipulator (sold separately).
X10mm, Full rotation of knob 500um Minimum graduation 2um
Dimensions/Weight
Control unit
W70 x D115 x H100mm, 1.15kg
Driving unit
W94 x D36 x H155mm, 280g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
