Key features include:

• Heats and cools interior with 0.1°C Precision to settings of 10°C - 60°C (from 25°C ambient)
• Solid-state Thermoelectric heat-pump for long life, no heating coils, no compressor, no freon
• Microprocessor-controlled for reliability and ease of use
• Lightweight enough to be portable; mobile and battery backup options available
• User-friendly, yet sophisticated, alarms alert you if the incubator falls out of
  desired parameters, even if due to the door being left ajar, or an empty CO2 tank
• Learns just the right amount of CO2 to inject, so none is wasted, increasing CO2
  tank life up to over one year!
• Fast CO2 recovery to your set parameters in less than 5 minutes
• State-of-the-art InfraRed CO2 sensor for low maintenance
• Nearly silent operation with ultra-low vibration
• Energy Efficient - draws less than 100 watts at maximum heating or cooling
• Excellent for Near-ambient temperature incubations - uses energy only as required
• Stores parameters for fast auto-recovery after a power failure
• Modern design with upgradeable microprocessor for specialty applications, such as:
  • Integrated, timed lighting system for Circadian experiments.
     ([click here] for our special Drosophila model.)
  • Automatic ramping or switching between temperatures.
  • Temperature / CO2 data logging.
  • Complete I/O module for bidirectional communication / control with a computer.
  • Almost anything else you can think of -- call us with your ideas!
• Weighs less than 30 lbs (13 kg)
  • Internal capacity 56 liters
  • Dimensions (inches):
    

    	H	W	D
    Outside	24.0	21.0	17.7
    Inside	15.0	16.5	13.5

• Also available in a slightly smaller chest model, with a door that can either open up or sideways (same price)
  • Internal capacity 38 liters
  • Dimensions (inches):
    

    	H	W	D
    Outside	24.0	15.0	17.0
    Inside	15.0	11.7	13.5

The standard model can be upgraded to a CO2 model if needed in the future.

Extended warranty plans are available. Please contact us for the terms and conditions of the warranty.

DigiTherm^TM Temperature Control Kit (For Microscope Stages, etc.)

The DigiTherm Temperature Control Kit lets you precisely heat or cool almost anything. It is ideal for controlling the temperature of samples on a microscope stage, and has capabilities superior to systems from other manufacturers costing thousands of dollars. You get the reliable Tritech DigiTherm Temperature Controller and 12 volt high current power supply found on our incubators, coupled to a pair of solid state Peltier Effect Thermoelectric heat pumps. Each heat pump has it's own mini heat sink and fan to dispose of heat pumped out of your apparatus, or collect heat from the environment to pump into your apparatus, depending on your requirements. The heat pumps can attach directly to a microscope stage, a metal plate, or a small container to control the temperature of a solution. Custom made plates, for example to control the temperature of a particular size of Petri dish or cell culture flask are also available. If you need us to mount our heating kit directly to your existing microscope we can provide this service.

Basic Kit: $750.00† Additional heaters/fans/peltiers, available upon request)

Freez-o-File^TM

Put an end to long term "arctic exploration" with the Tritech Research Freez-O-File. The Freez-O-File is a simple idea: a utility drawer system with integral temperature stabilizers! It is the ideal place to organize and store enzymes and buffers in your -20°C freezer. Not only does it allow you to take the enzymes you want to the bench while keeping them safe and cold, it lengthens the life of sensitive enzymes by protecting them from temperature fluctuations when the freezer door is left open or the freezer goes through a defrost cycle.

$ 109.00†

PappaCooler^TM

Hassle-free cryopreservation!

Don't go through the hassle and expense of running around to get liquid Nitrogen, or dry ice and ethanol or acetone, every time you want to quick-freeze your samples. With our PappaCooler and an -80°C freezer you can always be prepared. Store the PappaCooler unit in your freezer. Bring it to your bench when you are ready to quick-freeze your samples; insert them in the unit and they are frozen. The design has been optimized to produce ultra-high-efficiency frozen competent cells and to give high survival rates when Cryo-preserving prokaryotic and eukaryotic cells.

Not only will you be saving time and money using the PappaCooler, but you will also be saving the environment from solvents and gases that require lots of energy to produce. The PappaCooler is made partly from recycled materials.

$ 69.00†

TRITECH'S VERY OWN ICE BUCKETS

Fisher sells the "traditional" ice buckets for $50 to $70! Unbelievable!?! Well, Tritech Research comes to the rescue with high-tech injection molded polyethylene/polypropylene mini-ice chests filled with super-insulating polyurethane foam. They have attached lids that flip open (or detach if you prefer), and they are rectangular, just like your tube racks. These coolers keep your ice from melting for a long, long time, so you don't have to worry about your samples floating away. All models have comfortable, folding handles to make carrying them to and from the ice machine a breeze. Priced at just $25 to $50, once you use them, you can't believe you put up with the old ones for all those years.

$ 25.00† - $ 50.00†