Narishige's ME-7 is a large, sturdy, easy-to-operate micromanipulator. This is a large, sturdy micromanipulator for stereotaxic instruments and has been developed mainly for use with the SN-2N/3N. The manipulator body is fixed to a thick pole, which is in turn fixed to the solid base, providing an overall structure that is large yet rigid.

A fine movement unit is equipped for each axis, allowing precise three-dimensional adjustment. To make operation easy, a large, drum-type handle is mounted for control of the Z-axis, which is the most important. The Z-axis fine drive section is also equipped with an angle change arch to allow approach from any angle. As a result, this large and stable micromanipulator can approach from angles which are impossible with micromanipulators attached to the AP frame bar.

Specification

Accessories		Pillar, Square Mount, Box Screwdriver
Movement range	Coarse	Z40mm
	Fine	X20mm, Y20mm, Z20mm, Full rotation of knob 500um. Minimum graduation 10um
Dimensions/Weight		W350 x D300 x H390mm, 16.5kg

*Products categorized as Group-2 are those used in specialized applications. Because of the limited production of these products, they require longer lead times than Group-1 products, and they are non-returnable.

† These are our list prices. If you are paying with an Institutional Purchase Order or by check, you qualify for a 7.5% discount. Click here to change your payment method and see the lower prices.

ME-7

Three-Axis Canberra Type Micromanipulator

You Might Be Interested In

MF-830

Microforge

PC-10

Dual-Stage Glass Micropipette Puller

EG-400

Micropipette Grinder

Related Products

SM-15

Stereotaxic Micromanipulator

SD-101

Compact Drill

SM-20

Digital Micromanipulator