Narishige's NMN-25 packs similar features to those of the NMN-21 into a thinner drive unit to facilitate multi-channel recording. The placement of all three axes' control knobs in one plane instead of three, and the adoption of a simpler holder fixing block, enables several manipulators to be installed and operated close together without interfering with each other. Installation on an isolation table makes use of multiple manipulators straightforward. Like the NMN-21, which was developed specially for patch clamping, this mechanical manipulator integrates coarse and fine movements, and employs a body design which absorbs vibrations. As a result, operation is precise, stable, and free from concerns about drift and electromagnetic disturbance.

*For attachment directly to a microscope, a suitable adaptor is required (sold separately).
*The micromanipulator can be mounted directly on the isolation table.
*AP-13-3/AP-14 patch clamp headstage holders can be attached to this unit (sold separately).

Specification

Accessories included		Dedicated Universal Joint, Fixing Plate, H-12 Electrode Holder, Allen Wrench
Movement range	Coarse	X15mm, Y15mm, Z15mm Full rotation of knob: approx. 4mm
	Fine	X6mm, Y6mm (total Y Course+Fine travel 15mm), Z6mm Full rotation of knob: 250µm
Dimensions/Weight		W155 X D60 X H100mm, 600g

† These are our list prices. If you are paying with an Institutional Purchase Order or by check, you qualify for a 7.5% discount. Click here to change your payment method and see the lower prices.

NMN-25

Thin 3-Axis Coarse/Fine Mechanical Micromanipulator
(for multi-channel recording)

You Might Be Interested In

MMN-330

Miniature Three-Axis Coarse/Fine Micromanipulator (with Rotation,Pivot,Tilt Mechanism)

MLN-3R

Three-Axis Coarse Micromanipulator (with Rotation Mechanism)

MMN-3R

Miniature Three-Axis Coarse Micromanipulator (with Rotation Mechanism)

Related Products

M-6

Movable X-Block

M-10F

Single-Axis Fine Micromanipulator

C-2

Adjustable Clamp (R/L)