EG-44


DISCONTINUED Please See EG-45

Micropipette Grinder

EG-44:  $2,486.49 - Discontinued - Replaced by EG-45
Narishige's EG-44 micropipette grinder minimizes irregular movements on the grinding plane for greater precision.

This grinder is ideal for grinding micropipette tips, thanks to its employment of a special motor which is designed to minimize irregular movements of the grinding plane. In addition, this model provides stable performance at all revolution speeds -- from low for more precision to high for faster grinding. An easily operable coarse and fine movement coaxial manipulator is equipped for vertical operation of the microneedle, which also enables very precise grinding. A protractor is mounted on the needle holder fixing section, making it easy to set the required grinding angle, and an adaptor is attached for vertical grinding. New water filling and drainage mechanisms are installed to prevent clogging or the accumulation of shavings, making the apparatus as a whole much easier to use.

Specification
Accessories included Dedicated Pipette Holder, Adaptor for Vertical Grinding,
Diamond Wheel Cleaner, Power Supply Cable
Movement range Slider movement approx. 47mm
Glass capillary O.D.1mm - O.D.1.5mm
Power source AC100V(+-5%), 50/60Hz
AC120V(+-5%), 50/60Hz
AC220V(+-5%), 50/60Hz
AC240V(+-5%), 50/60Hz
Power consumption Approx. 10W
Moter speed Approx. 50 - 2,000rpm
Dimensions/Weight W180 x D165 x H310mm, 2.4kg

† These are our list prices. If you are paying with an Institutional Purchase Order or by check, you qualify for a 7.5% discount. Click here to change your payment method and see the lower prices.