IM-400


Electric Microinjector

IM-400:  $7,027.03 - Ships in 5-7 days
* A compressor or gas cylinder (air, nitrogen, etc.) & regulator are required to use this device.
* Use with IM-400B (sold separately) to frontfill the solution from pipette tip using suction.

Electric Microinjector ideal for DNA injection

Setting the time and pressure in advance makes it possible to inject very small volumes of liquid with great precision. The IM-400 has intuitive operation via touch panel and has a memory bank to store the setting value. The easy-to-insert fitting mechanism is incorporated into the tubing connection to facilitate installation.

Specifications
Accessories included*Connecting cable for operation unit (2.9m)
*Injection holder (HI-9)
*Injection tube (CT-4, Ø 2mm x 1.2m)
*Gas input hose (Ø 6mm x 2m, Ø 6mm x 1m)
*T-joint with a pressure relief valve
*Foot switch (connecting cable 2.9m)
*Power cord (1.5m)
*Silicone rubber gasket (HI01PK01)
Gas Input/OutputGas Input Portfor Ø 6mm diameter hose
Gas Output Portfor Ø 2mm diameter tube
Supply Pressure0.4 ~ 0.7MPa
Gas pressureInjection/Balance pressure0 ~ 0.5MPa
Flushing pressure0.4 ~ 0.7MPa
Power supply AC100V ~ AC240V, 50/60Hz
Power consumption 15W
Fuse rating T1A=250V (EN60127-2 sheet3)
Dimensions/WeightControl BoxW120 x D211 x H264mm, 3.1kg
Operation UnitW120 x D153 x H61.5mm, 780g


Consumables
ModelProductDescription
HI-01-PK01Silicone Rubber GasketFor 2.5mm (10 pcs)


IM-400 diagram
† These are our list prices. If you are paying with an Institutional Purchase Order or by check, you qualify for a 7.5% discount. Click here to change your payment method and see the lower prices.