Narishige's M-152 is a three-dimensional coarse manual manipulator with simple design. This compact, lightweight model offers coarse manipulation only and is very simple to use. A bar mount is provided to enable installation by either a mount adaptor or magnetic stand.

When used in conjunction with a micromanipulator such as the MMO-220A, quick three-dimensional operation is possible in low magnification experiments using a stereo microscope.

*For attachment to the microscope, P-1A height adjustment plate and a suitable adaptor is required (standard accessories).

*The ball joint that attaches the micromanipulator can be replaced by MMO-220A single-axis oil hydraulic micromanipulator (sold separately).

Specification

Accessories included		B-8B Ball Joint, P-1A Height Adjustment Plate, H-7 Pipette Holder
Movement range	Coarse	X25mm, Y20mm, Z25mm
Dimensions/Weight		W95 x D90 x H110mm, 320g

† These are our list prices. If you are paying with an Institutional Purchase Order or by check, you qualify for a 7.5% discount. Click here to change your payment method and see the lower prices.

Three-Axis Coarse/Fine Compact Micromanipulator

MM-3: $1,351.35 † - Ships in 1-5 days

Narishige's MM-3 is amongst the most popular three axis coarse/fine compact micromanipulator. Its smooth drive and stable controls have made the MM-3 a classic and popular micromanipulator for decades. Single-axis fine movement in the same direction as the microelectrode or needle provides a high level of control when approaching a specimen. The three-axes of coarse movement operate via strudy rack & pinion mechanisms, enabling the microelectrode or needle to be placed near the specimen quickly.

Handles on both sides of the X- and Z-axis make this equipment suitable for both left- and right-handed operators, and a tension adjustment is also available to prevent the unit from dropping under its own weight. If used properly, this model's smoothness and stability will remain unchanged even over several decades of use.

*The MM-3 mounts via an extra-heavy-duty 12mm mounting rod (not included). For mounting next to the microscope or target, use the GJ-8 heavy-duty magnetic stand or equivalent equipment. Contact us for other options if mounting directly to a microscope stage is required for maximum stability.

*It is possible to substitute a hydraulic micromanipulator, such as the MO-10, for the standard H-1 micropipette holder when remote control of X-axis is required.

Specification

Accessories included		H-1 Electrode Holder, Clamp Rod, Allen Wrench
Movement range	Coarse	X40mm, Y20mm, Z35mm
	Fine	X7mm, Full rotation of knob 250um, Minimum graduation 10um
Dimensions/Weight		W105 x D70 x H145mm, 790g

† These are our list prices. If you are paying with an Institutional Purchase Order or by check, you qualify for a 7.5% discount. Click here to change your payment method and see the lower prices.

Three-Axis Coarse/Fine Joystick-Type Micromanipulator

MN-151: $1,621.62 † - In Stock

Narishige's MN-151 is a lightweight, 3-axis mechanical micromanipulator which has coarse movements in the X, Y, and Z directions. In addition to the 3 coarse axes of movement, the MN-151 also incorporates fine, joystick-controlled movements in the X-Y plane. A knob with 5 um gradations provides fine mechanical movement in the Z axis.
The MN-151 is very versatile, and can be mounted in a variety of orientations on both the left and right sides of a microscope stage. It can be used to manipulate the primary needle holder in applications such as Drosophila, C. elegans, Xenopus, and Zebrafish microinjection. It also can be used in other applications such as mammalian oocyte microinjection, where it can be used as a versatile holding-pipette manipulator and for Yeast Tetrad microdissection.

Specification

Accessories included		B-8B Ball Joint, P-1A Height Adjustment Plate, H-7 Pipette Holder
Movement range	Coarse	X25mm, Y20mm, Z25mm
	Fine movement: Z axis 8mm Full rotation of fine knob 500um Minimum graduation 5um
	Joystick control 1:150 - 1:15 (X-Y plane movement ratio)
Dimensions/Weight		W95 x D90 x H110mm, 470g

† These are our list prices. If you are paying with an Institutional Purchase Order or by check, you qualify for a 7.5% discount. Click here to change your payment method and see the lower prices.

Three-Axis Coarse/Fine Direct-Drive Micromanipulator

MN-153: $1,189.19 † - Ships in 1-5 days

Narishige's MN-153 is a three axis coarse/fine direct drive micromanipulator with the capability of fine movement on the X-axis, enabling accurate linear approach to the cell with no danger of causing it any serious damage. Employment of the bar mount system provides complete installation flexibility and greatly broadens the range of possible applications.

*For attachment to the microscope, P-1A height adjustment plate and a suitable adaptor is required (standard accessories).
*The ball joint that attaches the micromanipulator can be replaced by MMO-220A single-axis oil hydraulic micromanipulator (sold separately).

Specification

Accessories included		B-8B Ball Joint, P-1A Height Adjustment Plate, H-7 Pipette Holder
Movement range	Coarse	X25mm, Y20mm, Z25mm
	Fine	X8mm Full rotation of knob 500µm Minimum graduation 5µm
Dimensions/Weight		W121 x D36 x H145mm, 330g

† These are our list prices. If you are paying with an Institutional Purchase Order or by check, you qualify for a 7.5% discount. Click here to change your payment method and see the lower prices.