This is a heavy steel base plate for mounting / attaching magnetic stands. The MINJ-HB is often purchased in conjunction with the GJ-1, GJ-8, or YOU-1 to position a micromanipulator next to a microscope. It has 4 non-slip, low-profile hard elastomeric feet, and the plate is coated in black so as not to reflect light during microscopy and to provide long, corrosion-free service.
FAQ's
Q: What are some alternative options for steel plates?
A: The smallest iron plate that we have is the IP-5 The reason that the MINJ-HB is thicker and the IP is larger is that we want all of our plates to be plenty heavy so as to securely support a micromanipulator hanging from a magnetic stand on the plate without the plate moving or tipping over.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Isolation Systems
Isolation System FOR LEICA MICROSCOPES
ITS2-L:
$10,378.38
†
- Ships 5-7 days
Easy change of the observation position
The ITS2-L isolation system, compatible with the Leica DMLFS, employs a stable isolation table on which both a specimen and micromanipulators can be fixed independently of the microscope. With the microscope firmly fixed in position, the base can move in both X and Y planes. This mechanism enables the operator to change the observation position without moving either the specimen or the micromanipulators. The stainless steel stage allows the operator to set up several micromanipulators, in any position required, by means of magnets or screws. From the previous version ITS-N the holes have been changed and are aligned in the optical axes which will allow an easier setup of the micromanipulators.
X22mm, Y22mm Full rotation of knob 500μm Minimum graduation 2μm
Dimensions/Weight
W640mm x D510mm x H287mm, 43kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Isolation System FOR NIKON MICROSCOPES
ITS2-N:
$10,378.38
†
- Ships 5-7 days
Easy change of the observation position
For the Nikon Eclipse FN1, the ITS2-N isolation system employs a stable isolation table on which both a specimen and micromanipulators can be fixed independently of the microscope. With the microscope firmly fixed in position, the base can move in both X and Y planes. This mechanism enables the operator to change the observation position without moving either the specimen or the micromanipulators. The stainless steel stage allows the operator to set up several micromanipulators, in any position required, by means of magnets or screws. From the previous version ITS-N the holes have been changed and are aligned in the optical axes which will allow an easier setup of the micromanipulators.
X22mm, Y22mm Full rotation of knob 500μm Minimum graduation 2μm
Dimensions/Weight
W640mm x D510mm x H287mm, 43kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Isolation System FOR OLYMPUS MICROSCOPES
ITS2-O:
$10,378.38
†
- Ships 5-7 days
Easy change of the observation position
The ITS2-O isolation system for the two microscopes of Olympus BX-51WI and BX61WI employs a stable isolation table on which both a specimen and micromanipulators can be fixed independently of the microscope. With the microscope firmly fixed in position, the base can move in both X and Y planes. This mechanism enables the operator to change the observation position without moving either the specimen or the micromanipulators. The stainless steel stage allows the operator to set up several micromanipulators, in any position required, by means of magnets or screws. From the previous version ITS-O the holes have been changed and are aligned in the optical axes which will allow an easier setup of the micromanipulators.
X22mm, Y22mm Full rotation of knob 500μm Minimum graduation 2μm
Dimensions/Weight
W640mm x D510mm x H287mm, 43kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Isolation System FOR ZEISS MICROSCOPES
ITS2-Z:
$10,378.38
†
- Ships 5-7 days
Easy change of the observation position
The ITS2-Z isolation system is a system for the Zeiss microscope Zeiss Axio Examiner and employs a stable isolation table on which both a specimen and micromanipulators can be fixed independently of the microscope. With the microscope firmly fixed in position, the base can move in both X and Y planes. This mechanism enables the operator to change the observation position without moving either the specimen or the micromanipulators. The stainless steel stage allows the operator to set up several micromanipulators, in any position required, by means of magnets or screws. From the previous version ITS-O the holes have been changed and are aligned in the optical axes which will allow an easier setup of the micromanipulators.
X22mm, Y22mm Full rotation of knob 500μm Minimum graduation 2μm
Dimensions/Weight
W640mm x D510mm x H287mm, 43kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
