DigiTherm™ Microscope Stage Temperature Control Kit

DT3: $810.81 † - In Stock

DT3-CE

Euro CE (220v) Version

+ $54.05

DigiTherm™ Microscope Stage Temperature Control Kit

     The DigiTherm™ Temperature Control Kit lets you precisely heat or cool almost anything. It is ideal for controlling the temperature of samples on a microscope stage, and has capabilities superior to systems from other manufacturers costing thousands of dollars.

     You get the reliable Tritech DigiTherm Temperature Controller and 12 volt high current power supply found on our incubators, coupled to a pair of solid state Peltier Effect Thermoelectric heat pumps. Each heat pump has it's own mini heat sink and fan to dispose of heat pumped out of your apparatus, or collect heat from the environment to pump into your apparatus, depending on your requirements.

     The heat pumps can attach directly to a microscope stage, a metal plate, or a small container to control the temperature of a solution. Custom made plates, for example to control the temperature of a particular size of Petri dish or cell culture flask are also available. If you need us to mount our heating kit directly to your existing microscope we can provide this service.

Basic Kit: $750.00† (Additional heaters/fans/peltiers, available upon request)

† These are our list prices. If you are paying with an Institutional Purchase Order or by check, you qualify for a 7.5% discount. Click here to change your payment method and see the lower prices.

DigiTherm™ Bench Plates (Custom Made)

DT4: $810.81 † - Special Order

Tritech Research offers Heating / Cooling Bench Plates, Stages, Fixtures and Adapters to couple our DigiTherm™ Temperature Control Kit circuitry to virtually any experiment or piece of equipment in your lab.

Custom machined parts range from a few hundred dollars on up. Contact us, using the information at the bottom of the page, to describe your custom application, and we'll find you a solution!

† These are our list prices. If you are paying with an Institutional Purchase Order or by check, you qualify for a 7.5% discount. Click here to change your payment method and see the lower prices.

DigiTherm™ Heating Stage Adapter Plates (Custom Made)

DT5: $810.81 † - Special Order

Tritech Research offers Heating Adapter plates so that you can use our DigiTherm™ Temperature Controller to control the temperature of virtually any type of sample slide or dish on your microscope.

These are ideal for time-lapse photography of live samples and for in vitro fertiliztion work. Custom machined parts range from a few hundred dollars on up. Contact us, using the information at the bottom of the page, to describe your custom application - we are here to help.

† These are our list prices. If you are paying with an Institutional Purchase Order or by check, you qualify for a 7.5% discount. Click here to change your payment method and see the lower prices.

Freez-O-File™ Freezer Organizer / Enzyme Stabilizer

FF-1: $117.84 † - In Stock

Put an end to long term "arctic exploration" with the Tritech Research Freez-O-File™. The Freez-O-File is a simple idea: a utility drawer system with integral temperature stabilizers! It is the ideal place to organize and store enzymes and buffers in your -20°C freezer. Not only does it allow you to take the enzymes you want to the bench while keeping them safe and cold, it lengthens the life of sensitive enzymes by protecting them from temperature fluctuations when the freezer door is left open or the freezer goes through a defrost cycle.

† These are our list prices. If you are paying with an Institutional Purchase Order or by check, you qualify for a 7.5% discount. Click here to change your payment method and see the lower prices.

PappaCooler™ -80 Cryo-Preserver

PPC-1: $74.59 † - Ships in 3-5 days

Don't go through the hassle and expense of running around to get liquid Nitrogen, or dry ice and ethanol or acetone, every time you want to quick-freeze your samples. With our PappaCooler™ and an -80°C freezer you can always be prepared.

Store the PappaCooler unit in your freezer. Bring it to your bench when you are ready to quick-freeze your samples; insert them in the unit and they are frozen. The design has been optimized to produce ultra-high-efficiency frozen competent cells and to give high survival rates when Cryo-preserving prokaryotic and eukaryotic cells.

Not only will you be saving time and money using the PappaCooler, but you will also be saving the environment from solvents and gases that require lots of energy to produce. The PappaCooler is made partly from recycled materials.

† These are our list prices. If you are paying with an Institutional Purchase Order or by check, you qualify for a 7.5% discount. Click here to change your payment method and see the lower prices.

Better Than Icebuckets

TIB-1: $36.76 † - In Stock

Fisher sells the "traditional" ice buckets for $50 to $70! Unbelievable!?! Well, Tritech Research comes to the rescue with high-tech injection molded polyethylene/polypropylene mini-ice chests filled with super-insulating polyurethane foam. They have attached lids that flip open (or detach if you prefer), and they are rectangular, just like your tube racks. These coolers keep your ice from melting for a long, long time, so you don't have to worry about your samples floating away. All models have comfortable, folding handles to make carrying them to and from the ice machine a breeze. Priced at just $25 to $50, once you use them, you can't believe you put up with the old ones for all those years.

† These are our list prices. If you are paying with an Institutional Purchase Order or by check, you qualify for a 7.5% discount. Click here to change your payment method and see the lower prices.

Biowarmer, Temperature Control System with Stage Plate

MT-1: $3,783.78 † - Special Order

A constant-temperature plate designed by Narishige to keep microscope specimens at a constant temperature. Various holders can be attached easily for convenient fixing of various items.(2 types: for Nikon and Olympus.)

Power input : 110V AC
Conductive film power consumption : DC 1.5W(with 37°C setting)
Temperature sensor : Platinum thin-film resistor element
ITO conductive film resistance : 25 ohms
Spectral transmission(visible section) : 86%
Conductive film glass thickness : 0.4mm
Irrigation fluid heating cell : Uses distilled water
Relay noise : Undetectable
Error : 0.2

† These are our list prices. If you are paying with an Institutional Purchase Order or by check, you qualify for a 7.5% discount. Click here to change your payment method and see the lower prices.