|
Direct-Drive Micromanipulators |
Narishige's BC-3 ball joint for for mounting adjustable clamp C-1
| |
BC-3:
$778.38
†
- Ships in 1-5 days
|
|
The compact, adjustable clamp C-1 is mounted on a ball joint, and can be used for various assisting purposes. The ball joint mounting enhances ease of use by allowing the angles to be set freely.
*Mounting bar sold separately.
*Use GJ-1 magnetic stand or equivalent equipment to attach this model.
When ordering, please indicate if the unit will be mounted for right or left-handed use as there are two different BC-3 clamps.
Specifications | Accessories included | XY Control Knob, Allen Wrench | | Movement range: | Coarse | Z19mm | | Fine | X15mm, Y6mm | | Dimensions/Weight | W80 x D46 x H96mm, 250g |
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Narishige's BC-4ball joint for for mounting adjustable clamp C-2
| |
BC-4:
$870.27
†
- Ships in 1-5 days
|
|
The compact, adjustable clamp C-2 is mounted on a ball joint, and can be used for various assisting purposes. The ball joint mounting enhances ease of use by allowing the angles to be set freely.
*Mounting bar sold separately.
*Use GJ-1 magnetic stand or equivalent equipment to attach this model.
When ordering, please indicate if the unit will be mounted for right or left-handed use as there are two different BC-3 clamps.
Specifications | Accessories included | XY Control Knob, Allen Wrench | | Movement range: | Coarse | Z24mm | | Fine | X15mm, Y6mm | | Dimensions/Weight | W80 x D46 x H96mm, 300g |
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Three-Axis Coarse/Fine Joystick-Type Micromanipulator with Tilting Apparatus (Bracket Mount)
| |
MJ-1:
$4,270.27
†
- Special Order
|
|
Narishige's MJ-1 is a three-axis coarse/fine micromanipulator with joystick control for better operability. This model's joystick enables micro tools to be freely controlled on both X and Y planes. The moving ratio is changed by rotating the lever, so adjustment is a simple matter.
*For attachment to the microscope, a suitable adaptor is required (sold separately).
Specification
| Accessories | H-1 Electrode Holder, Spanner, Tension Adjustment Pin,
Tension Adjustment Fixture, Allen Wrench | | Movement range | Coarse | X45mm, Y20mm, Z25mm | | Joystick fine movement | 1:450 - 1:30 | | Z coaxial handle | Full rotation of coarse knob 18mm
Full rotation of fine knob 200um | | Dimensions/Weight | W160 x D115 x H220mm, 1.9kg |
*Products categorized as Group-2 are those used in specialized applications. Because of the limited production of these products, they require longer lead times than Group-1 products, and they are non-returnable.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Three-Axis Coarse/Fine Joystick-Type Micromanipulator with Tilting Apparatus (Magnetic Mount)
| |
MJ-2:
$4,594.59
†
- Special Order
|
|
Narishige's MJ-2 is a three-axis coarse/fine micromanipulator freely fixed with a magnetic stand, with joystick control for better operability. Thanks to incorporation of a joystick, micro tools can be freely controlled on both X and Y planes. Rotating the lever changes the moving ratio, so adjustment is easy.
Three-dimensional movement is possible, with coarse movement provided on the X and Y axes, and coaxial coarse and fine movement on the Z axis. The MJ-2 is firmly and freely attached by using the magnetic stand, and the approach angles can be set via the tilting plate.
Specification
| Accessories | H-1 Electrode Holder, Spanner, Tension Adjustment Pin,
Tension Adjustment Fixture, Allen Wrench | | Movement range | Coarse | X45mm, Y20mm, Z25mm | | Joystick fine movement | 1:450 - 1:30 | | Z coaxial handle | Full rotation of coarse knob 18mm
Full rotation of fine knob 200um | | Dimensions/Weight | W160 x D115 x H220mm, 2.9kg |
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Three-Axis Coarse/Fine Micromanipulator ideal for patch clamping with solid body, stability and practicality.
| |
MX-1:
$3,891.89
†
- Special Order
|
|
Narishige's MX-1 is a manual micromanipulator specially designed to overcome problems of drift caused by temperature change, and to minimize the jitters invariably associated with manual operation. Coarse and fine movements can be performed for each axis and fine control with 1um minimum gradations is possible. Incorporation of a rotation mechanism makes it easy to attach and detach microelectrodes.
Different models for right- and left-handed users are available. Please specify right- or left-handed model when ordering.
*Separately sold tilting stand mountable.
Specification
| Accessories | H-1 Electrode Holder, Spanner, Allen Wrench,
Tension Adjustment Pin | | Movement range | Coarse | X35mm, Y30mm | | Fine | X4mm, Y4mm
Full rotation of knob 100um
Minimum graduation 1um | | Z coaxial handle | Coarse and fine 24mm
Full rotation of knob 18mm (coarse), 200um (fine) | | Dimensions/Weight | W210 x D160 x H210mm, 3.4kg |
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Three-Axis Coarse/Fine Micromanipulator with Tilting Stand for More Convenient Patch Clamping
| |
MX-2:
$4,270.27
†
- Ships in 1-5 days
|
|
Narishige's MX-2 is a three-axis coarse/fine micromanipulator comprised of the MX-1 and an attached TM-1 tilting stand, for easier and more convenient patch clamping. Its unique structure prevents hand jitters passing to the tip of the microelectrode, and obviates concerns about drifting caused by temperature fluctuations. The tilting stand offers outstanding stability and allows the manipulator to be set at any angle for easier approach to the specimen. Furthermore, it enables the manipulator to move horizontally as well as vertically in line with the microelectrode. The stand has a magnetic base, so (as long as an iron plate is used) installation is possible even when no screw holes are provided. A rotating mechanism is also included, making the exchange of microelectrodes easy.
Different models for right- and left-handed users are available. Please specify right- or left-handed model when ordering.
Specification
| Accessories included | H-1 Electrode Holder
Spanner
Allen Wrench
Tension Adjustment Pin |
|---|
| Movement range | Coarse | X35mm, Y30mm |
|---|
| Fine | X4mm, Y4mm
Full rotation of knob: 100µm
Minimum graduation: 1µm |
|---|
| Z-axis coaxial handle | Coarse/fine movement range: 24mm
Full rotation of coarse handle: 18mm
Full rotation of fine handle: 200µm |
|---|
| Dimensions/Weight | W210 × D180 × H265mm, 6.7kg |
|---|
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Three-Axis Coarse/Fine Micromanipulator for Installation on the Stage Side of a Microscope (with Tilting, Rotation Mechanism)
| |
MX-3:
$3,243.24
†
- Special Order
|
|
Narishige's MX-3 is a smaller MX model for installation on the stage side of a microscope. This model includes the MX's special patch clamping features, but in a more compact, space-saving version. A tilting board (included) is attached via an adaptor, allowing the whole body to be set at different angles and enabling easy approach to the microelectrode from the side of the microscope. A rotation mechanism is also included to facilitate attachment/detachment of microelectrodes.
Different models for right- and left-handed users are available. Please specify right- or left-handed model when ordering.
*For attachment to the microscope, a suitable adaptor is required (sold separately)
Specification
| Accessories | H-1 Electrode Holder, Spanner, Allen Wrench,
Tension Adjustment Pin | | Movement range | Coarse | X25mm, Y23mm | | Fine | X3mm, Y3mm,
Full rotation of knob 100um
Minimum graduation 1um | | Z coaxial handle | Coarse/Fine movement range 26mm
Full rotation of coarse knob 18mm
Full rotation of fine knob 200um | | Dimensions/Weight | W160 x D117 x H180mm, 1.9kg |
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Three-Axis Coarse/Fine Micromanipulator and Magnetic Base for Installation on the Stage Side of a Microscope (with Tilting, Rotation Mechanism)
| |
MX-4:
$3,513.51
†
- Ships in 1-5 days
|
|
Narishige's MX-4 model includes the MX's special patch clamping features, excellent stability, but in another more compact, space-saving version. The tilting stand has a magnetic base for unrestricted installation, and allows the whole body to be set at different angles in order to facilitate approaching your target with microelectrodes. A rotation mechanism is also included for easy attachment/detachment of microelectrodes.
Different models for right- and left-handed users are available. Please specify right- or left-handed model when ordering.
Specification
| Accessories included | H-1 Electrode Holder
Spanner
Allen Wrench
Tension Adjustment Pin |
|---|
| Movement range | Coarse | X25mm, Y23mm |
|---|
| Fine | X3mm, Y3mm
Full rotation of knob: 100µm
Minimum graduation: 1µm |
|---|
| Z-axis coaxial handle | Coarse/fine movement range: 26mm
Full rotation of coarse handle: 18mm
Full rotation of fine handle: 200µm |
|---|
| Dimensions/Weight | W143 × D106 × H265mm, 2.85kg |
|---|
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Three-Axis Coarse/Fine Manual Micromanipulator
| |
NMN-21:
$3,891.89
†
- Ships in 1-5 days
|
|
Narishige's NMN-21 is a manually operated micromanipulator which minimizes jitter for simplicity and high performance.
Drift and electromagnetic disturbance are critical problems in patch clamping work. This mechanical micromanipulator was developed specifically for patch clamping: it does not employ a liquid hydraulic system (which is prone to drift caused by temperature changes), has no springs (a common cause of mechanical drift), nor a motor (which can be a source of electrical noise). Its body is designed to absorb vibrations, so that even at high magnifications, problems of jittering are virtually non-existant. The NMN-21 is based on a drum type design and utilizes pairs of sliders for each axis that serve to isolate vibrations caused then a user touches the control knobs from the movement of the device. High mass and a low center of gravity provide exceptionally steady and stable performance. The overall design is compact, so installation requires a minimum of space. With coarse and fine manipulators integrated into the compact body, this model handles a full range of required motions, from moving a microelectrode into the microscope field of view to making delicate contact with cells.
* Can be mounted directly on an optical bench-type isolation table
* Can be firmly fixed to any part of a steel isolation table with the NMN-C magnetic stand (sold separately)
* Can be mounted directly to microscopes via suitable adapters (sold separately)
* AP-14/AP-13-3 patch clamp headstage holders can be attached via the integrated UST-2 solid universal joint
 Specification | Accessories included | UST-2 Solid Universal Joint, Fixing Plate,
H-1 Electrode Holder, Allen Wrench | | Movement range | Coarse | X15mm, Y15mm, Z15mm
Full rotation of knob: approx. 4mm | | Fine | X6mm, Y6mm, Z6mm
Full rotation of knob: 250um
Minimum graduation: 1um | | Dimensions/Weight | W110 x D170 x H105mm, 930g |
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Thin 3-Axis Coarse/Fine Mechanical Micromanipulator
(for multi-channel recording)
| |
NMN-25:
$3,891.89
†
- Ships in 1-5 days
|
|
Narishige's NMN-25 packs similar features to those of the NMN-21 into a thinner drive unit to facilitate multi-channel recording. The placement of all three axes' control knobs in one plane instead of three, and the adoption of a simpler holder fixing block, enables several manipulators to be installed and operated close together without interfering with each other. Installation on an isolation table makes use of multiple manipulators straightforward. Like the NMN-21, which was developed specially for patch clamping, this mechanical manipulator integrates coarse and fine movements, and employs a body design which absorbs vibrations. As a result, operation is precise, stable, and free from concerns about drift and electromagnetic disturbance.
*For attachment directly to a microscope, a suitable adaptor is required (sold separately).
*The micromanipulator can be mounted directly on the isolation table.
*AP-13-3/AP-14 patch clamp headstage holders can be attached to this unit (sold separately).
Specification
| Accessories included | Dedicated Universal Joint, Fixing Plate,
H-12 Electrode Holder, Allen Wrench | | Movement range | Coarse | X15mm, Y15mm, Z15mm
Full rotation of knob: approx. 4mm | | Fine | X6mm, Y6mm (total Y Course+Fine travel 15mm), Z6mm
Full rotation of knob: 250µm
| | Dimensions/Weight | W155 X D60 X H100mm, 600g |
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Muscle Fixing Apparatus
| |
A-2:
$1,189.19
†
- Special Order
|
|
Narishige's A-2 Muscle Fixing Apparatus facilitates insertion of a microelectrode into muscle or nerve fibers by gripping both ends of the muscle or nerve fiber and holding it under tension by stretching both ends mildly.
Note that Narishige's A-2 is a component of Narishige's A-3 and needs rest of the components of A-3 for using it. If you want to use A-2 independently, we recommend that you attach it to the stand using Narishige's X-Block.
Specifications | Movement range | Fine | Y30mm | | Dimensions/Weight | W160 x D130 x H40mm, 500g |
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Ultracompact Micromanipulator
| |
MO-903A:
$324.32
†
- Ships in 1-5 days
|
|
Narishige's MO-903A is part of MO-903, an ultracompact micromanipulator whose coarse control permits the initial positioning of a microelectrode near the target point, while the fine control enables fine approaches toward the target point. Used in combination with MO-903B. The coarse control permits the coarse positioning of a microelectrode near the target point.
Specification
| Accessory included | Allen Wrench |
|---|
| Movement range | Coarse | Z40mm |
|---|
| Dimensions/Weight | W12 × D8 × H51mm, 7g |
|---|
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Ultracompact Micromanipulator
| |
MO-903B:
$454.05
†
- Ships in 1-5 days
|
|
Narishige's MO-903B is part of MO-903, an ultracompact micromanipulator whose coarse control permits the initial positioning of a microelectrode near the target point, while the fine control enables fine approaches toward the target point. The fine control knob can be hand-manipulated or controlled with the supplied allen wrench. Used in combination with MO-903A, it permits coarse and fine micromanipulation. (Refer to MO-903.) Permits placement in any given position on the outer circumference of the grid case ( MO-903C).
Specification
| Accessory included | Allen Wrench |
|---|
| Movement range | Fine | Z10mm
Full rotation of knob 300µm |
|---|
| Dimensions/Weight | W11 × D4 × H20mm, 2g |
|---|
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Grid Case For Ultracompact Manipulator
| |
MO-903C:
$389.19
†
- Ships in 1-5 days
|
|
Narishige's MO-903C is part of MO-903, an ultracompact micromanipulator whose coarse control permits the initial positioning of a microelectrode near the target point, while the fine control enables fine approaches toward the target point. Used in combination with MO-903A/ MO-903B. The use of multiple micromanipulators permits multi-channel operation. The grid has 0.5mm-dia. holes with 1mm pitches. The use of the grid makes do without a guide tube and permits accurate approach toward the target point.
Specification
| Accessory included | Allen Wrench |
|---|
| Dimensions/Weight | ø21 × H10mm, 8g |
|---|
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Cap For Ultracompact Manipulator
| |
MO-903D:
$64.86
†
- Ships in 1-5 days
|
|
Narishige's MO-903D is part of MO-903, an ultracompact micromanipulator whose coarse control permits the initial positioning of a microelectrode near the target point, while the fine control enables fine approaches toward the target point. With the experiment finished or when intending to conduct continuous recording, the animal can be set free by putting this cap on. When resuming recording, simply remove the cap. In this way, the use of this cap permits long hours of recording without having to reset the manipulators.(It is possible to put the cap on while the microelectrode is being held by the fine micromanipulator ( MO-903B)
Specification
| Accessory included | Allen Wrench |
|---|
| Dimensions/Weight | ø32 × H29mm, 8g |
|---|
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Mounting Chamber For Manipulator
| |
MO-903E:
$81.08
†
- Ships in 1-5 days
|
|
Narishige's MO-903E is part of MO-903, an ultracompact micromanipulator whose coarse control permits the initial positioning of a microelectrode near the target point, while the fine control enables fine approaches toward the target point. A standard chamber to allow the grid case ( MO-903C) to be fixed on the animal.Available for use with MO-95/951, MO-96/96A, and MO-97/97A.
Specification
| Accessory included | Screws for Fixture |
|---|
| Dimensions/Weight | W34 × D30 × H23mm, 15g |
|---|
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Muscle Fixing Apparatus
| |
A-1:
$2,378.38
†
- Special Order
|
|
Narishige's A-1 Muscle Fixing Apparatus facilitates insertion of a microelectrode into muscle or nerve fibers by gripping both ends of the muscle or nerve fiber and holding it under tension by stretching both ends mildly.
Normally, insertion of a microelectrode into muscle or nerve fiber is very difficult. Narishige's A-1 apparatus makes it easy by gripping both ends of the muscle or nerve fiber, stretching them and then holding the specimen under tension. Using the tweezers mounted on the ball joint, both ends of fibers of any length can be held, and moved in the Y-or Z-axis. Also attached is a stand, which allows vertical adjustment and on which the specimen is placed.
Specifications | Movement range | Coarse/Fine | Z50mm/Y50 | | Dimensions/Weight | W90 x D140 x H170mm, 4kg |
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Muscle Fixing Apparatus with Micromanipulator
| |
A-3:
$2,918.92
†
- Special Order
|
|
Narishige's A-3 Muscle Fixing Apparatus with Micromanipulator facilitates insertion of a microelectrode into muscle or nerve fibers by gripping both ends of the muscle or nerve fiber and holding it under tension by stretching both ends mildly. The A-2, which grips and stretches both ends of muscle fibers and holds them under tension, is mounted on this manipulator. In addition to the three-dimensional coarse movement, fine movement in the Z-axis is included to enable vertical adjustment.
Specifications
| Movement range | Coarse | X30mm, Y30mm, Z40mm | | Fine | Y30mm | Z coaxial
handle | Full rotation of coarse knob 18mm
Full rotation of fine knob 200um | | Dimensions/Weight | W170 x D150 x H220mm, 3.95kg |
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Ultracompact Coarse/Fine Micromanipulator
| |
MO-903:
$1,189.19
†
- Ships in 1-5 days
|
|
Narishige's MO-903 is an ultracompact micromanipulator whose coarse control permits the initial positioning of a microelectrode near the target point, while the fine control enables fine approaches toward the target point. The use of the grid permits accurate approach toward the target point without the help of a guide pipe. After fixed to the target point, the animal can be set free by detaching the coarse manipulator;MO-903A and putting the cap (MO-903D) on.
*This is a set of: MO-903A, MO-903B, MO-903C, MO-903D, and MO-903E.
*With the addition of extra MO-903A/B units, multi-channel operation is possible.
*Full turn of knob: 0.3mm.Adjustable in a fore-and-aft direction. The fine control knob can be hand-manipulated or controlled with a wrench-driver.
Specification | Movement range | Coarse: 40mm, Fine: 10mm | | |
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Stereotaxic Manipulator
| |
SM-30:
$756.76
†
- Special Order
|
|
Narishige's SM-30 is a simple, two-dimensional auxiliary manipulator. This two-dimensional coarse manipulator is for performing various auxiliary tasks with stereotaxic instruments. Despite its simple, compact design, it has a long working range and can use holders ranging in size from 7mm to up to 14mm. Attachment to Y-1 is recommended, mainly using X-12 X-blocks.
Specification
| Movement range | Coarse | X40mm, Z30mm | | Others | Fixing bar 12mm | | Dimensions/Weight | W115 x D20 x H105mm, 200g |
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
|
|
|
