†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Direct-Drive Micromanipulators
Three-Axis Coarse/Fine Joystick-Type Micromanipulator with Tilting Apparatus (Magnetic Mount)
MJ-2:
$4,594.59
†
- Discontinued
Narishige's MJ-2 is a three-axis coarse/fine micromanipulator freely fixed with a magnetic stand, with joystick control for better operability. Thanks to incorporation of a joystick, micro tools can be freely controlled on both X and Y planes. Rotating the lever changes the moving ratio, so adjustment is easy.
Three-dimensional movement is possible, with coarse movement provided on the X and Y axes, and coaxial coarse and fine movement on the Z axis. The MJ-2 is firmly and freely attached by using the magnetic stand, and the approach angles can be set via the tilting plate.
Full rotation of coarse knob 18mm Full rotation of fine knob 200um
Dimensions/Weight
W160 x D115 x H220mm, 2.9kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Narishige's MN-151 is a lightweight, 3-axis mechanical micromanipulator which has coarse movements in the X, Y, and Z directions. In addition to the 3 coarse axes of movement, the MN-151 also incorporates fine, joystick-controlled movements in the X-Y plane. A knob with 5 um gradations provides fine mechanical movement in the Z axis. The MN-151 is very versatile, and can be mounted in a variety of orientations on both the left and right sides of a microscope stage. It can be used to manipulate the primary needle holder in applications such as Drosophila, C. elegans, Xenopus, and Zebrafish microinjection. It also can be used in other applications such as mammalian oocyte microinjection, where it can be used as a versatile holding-pipette manipulator and for Yeast Tetrad microdissection. *Please note that the P-1A Height Adjustment Plate (not included) is required to attach the MN-151 to Narishige's bracket systems. A needle holder, such as our MINJ-4, Narishige's HI-7, H-7 or HI-9, also needs to be purchased separately.
Specification
Accessories included
B-8B Ball Joint
Movement range
Coarse
X25mm, Y20mm, Z25mm
Fine movement: Z axis 8mm Full rotation of fine knob 500um Minimum graduation 5um
Joystick control 1:150 - 1:15 (X-Y plane movement ratio)
Dimensions/Weight
W95 x D90 x H110mm, 470g
FAQ's
Q: What are the main differences between the MN-151 and MN-153 micro manipulators?
A: MN-153 and MN-151 both have 3-axis course movement. MN-153 has an additional fine movement in the X-axis (the direction toward the sample) and no fine movement in Y or Z. MN-151 has an additional fine movement in the Z-axis (lowering down to the same plane as the sample) plus it has the joystick for fine, coordinated movement in X and Y. If you move the joystick left and right, the needle moves towards and away from the sample, respectively. If you move the joystick toward you or away from your, the needle moves toward you and away from you in the Y axis, respectively. The MN-151 makes it easier to line up the needle before injection. However, the biggest advantage is that the needle moves at a speed proportional to the speed you move the joystick, so it is easier to make the needle pierce the eggs.
Q: What are the types of mounting adapter needed to attach the MN-151 to the scope? Does the mounting adaptor attach below or behind the stage?
A: The NZ-19-2 mounts on the illumination pillar, not onto the stage. This makes it really easy to change samples, because on your scope, you can set it so that you can tilt the pillar toward the back, which will cause the micromanipulator to lift up and out of the way. The NZ-19-2 goes out to the side, NR2 goes up, and the MN-151 includes a P-1A bracket to come back toward you with a bar to mount the micromanipulator.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Spare Anchor for TAKANOME used to affix microinjector holders to MK-1 (2 pieces)
$102.70
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Four Axis Hanging Joystick Oil Hydraulic Micromanipulator
The optimal manipulator specifically made for handling suspension cells
The Narishige TAKANOME MTK-1 4-axis Hanging Joystick Oil Hydraulic Micromanipulator system is a next generation state-of-the-art micromanipulator for laboratory microinjection experiments and In Vitro Fertilization (IVF) procedures. In Japanese, TAKANOME is a metaphor equating this system with a hawk setting its sight on its prey and swooping down precisely, which is exactly what the MTK-1 does. Utilizing improved technology to create elegant simplicity, this advanced system has been especially developed to improve the efficiency of transgenic experiments, IVF, and all procedures involving microinjection of cell suspension cultures.
With a large retraction range of 50mm, the MTK-1 fulfills multiple functions a in single unit, eliminating the need for a separate coarse manipulator. Additionally, this robust micromanipulator includes a innovative design that allows the user to change the pipette angle while keeping the needle tip in the center of the field of view, making angle adjustment a breeze! You can easily switch the pipette from its "home" position to its "working" position, resulting in a significant reduction in the probability of pipette breakage and you will save time by not having to re-position your injection holder each time you change pipettes. With the Narishige MTK-1, you can look forward to a more efficient, precise, and far less painstaking laboratory experience!
MTK-1 Version Compatibility by Microscope Supplier
Supplier
Microscope
Model
Olympus
IX70
MTK-1-O1
IX71
MTK-1-O2
IX73, IX83
MTK-1-O3
Nikon
ECLIPSE TE2000
MTK-1-N1
ECLIPSE Ti
MTK-1-N2
ECLIPSE Ts2R
MTK-1-N3
ECLIPSE Ti2
MTK-1-N4
Carl Zeiss
Axiovert 200, Axio Observer 3/5/7
MTK-1-Z1
Axio Vert.A1
MTK-1-Z2
Leica
DMI3000 B, DMI4000 B, DMI6000 B
MTK-1-L1
DMi8
MTK-1-L2
* If a special adapter is required for a microscope not listed above please contact us.
Specification
Accessories included
Dedicated Mounting Adaptor IP Iron Plate x 2 units Positioning Gauge Anchor x 2 units Hex Wrench Pipette Scale x 2 sheets
Movement range
X/Y/Z-axis
Oil hydraulic control 10mm Full rotation of knob 250µm Minimum graduation 5µm
T-axis (for holder)
Oil hydraulic control 10mm Full rotation of knob 1,000µm Minimum graduation 20µm
Manual (Return and Home position) 50mm
Incident angle 15 ~ 40°
Dimensions/Weight
Control unit
W85.6 x D225 ~ 235 x H151 ~ 171mm, Approx. 1.9kg
Drive unit
W108 ~ 138 x D145 ~ 155 x H100 ~ 150mm, Approx. 820g
Hydraulic tube length
0.6m
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Leica Hydraulic Fine + Motorized Coarse Joystick Micromanipulators (pair)
NAI-2L:
$24,540.54
†
- Ships in 3-5 weeks
Narishige's NAI-2L micromanipulators are designed to work specifically with LEICA microscopes including Leica DMI3000B - 6000B. They are compact and provide lots of open working space on the microscope stage without sacrificing operability and, as such, are the best micromanipulators for IVF / ICSI procedures.
The NAI-2L combines 3-axis Motorized Coarse Manipulator and a Three-axis Fine Oil Hydraulic Micromanipulator, each with its own joystick. This system provides remote control for 3-axis course and fine movement, conveniently at your fingertips.
***Note that this item includes two complete sets of micromanipulators - one for the holding side and one for the injecting side.***
Specifications: Coarse movement : 22mm Fine movement : 10mm (One full turn of knob : 500µm) Minimum graduation : 4µm Maximum working range in the X-Y plane by a joystick maneuver : 2mm
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Nikon Hydraulic Fine + Motorized Coarse Joystick Micromanipulators (pair)
NAI-2N:
$24,540.54
†
- Ships in 3-5 weeks
Narishige's NAI-2N micromanipulators are designed to work specifically with NIKON microscopes including Nikon ECLIPSE Ti-E/-U/-S / TE2000-E/-U/-S. They are compact and provide lots of open working space on the microscope stage without sacrificing operability and, as such, are the best micromanipulators for IVF / ICSI procedures.
The NAI-2N combines 3-axis Motorized Coarse Manipulator and a Three-axis Fine Oil Hydraulic Micromanipulator, each with its own joystick. This system provides remote control for 3-axis course and fine movement, conveniently at your fingertips.
***Note that this item includes two complete sets of micromanipulators - one for the holding side and one for the injecting side.***
Specifications: Coarse movement : 22mm Fine movement : 10mm (One full turn of knob : 500µm) Minimum graduation : 4µm Maximum working range in the X-Y plane by a joystick maneuver : 2mm
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Olympus Hydraulic Fine + Motorized Coarse Joystick Micromanipulators (pair)
NAI-2O:
$24,540.54
†
- Ships in 3-5 weeks
Narishige's NAI-2O micromanipulators are designed to work specifically with Olympus microscopes including the Olympus IX71 and IX-51. They are compact and provide lots of open working space on the microscope stage without sacrificing operability and, as such, are the best micromanipulators for IVF / ICSI procedures.
The NAI-2O combines 3-axis Motorized Coarse Manipulator and a Three-axis Fine Oil Hydraulic Micromanipulator, each with its own joystick. This system provides remote control for 3-axis course and fine movement, conveniently at your fingertips.
***Note that this item includes two complete sets of micromanipulators - one for the holding side and one for the injecting side.***
Specifications: Coarse movement : 22mm Fine movement : 10mm (One full turn of knob : 500µm) Minimum graduation : 4µm Maximum working range in the X-Y plane by a joystick maneuver : 2mm
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Zeiss Hydraulic Fine + Motorized Coarse Joystick Micromanipulators (pair)
NAI-2Z:
$24,540.54
†
- Ships in 3-5 weeks
Narishige's NAI-2Z micromanipulators are designed to work specifically with Zeiss microscopes including Carl Zeiss Models Axio Observer / Axiovert200. They are compact and provide lots of open working space on the microscope stage without sacrificing operability and, as such, are the best micromanipulators for IVF / ICSI procedures.
The NAI-2Z combines 3-axis Motorized Coarse Manipulator and a Three-axis Fine Oil Hydraulic Micromanipulator, each with its own joystick. This system provides remote control for 3-axis course and fine movement, conveniently at your fingertips.
***Note that this item includes two complete sets of micromanipulators - one for the holding side and one for the injecting side.***
Specifications: Coarse movement : 22mm Fine movement : 10mm (One full turn of knob : 500µm) Minimum graduation : 4µm Maximum working range in the X-Y plane by a joystick maneuver : 2mm
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Leica Hydraulic Fine Joystick+ Mechanical Coarse Micromanipulators (pair)
NAI-3L:
$18,918.92
†
- Ships in 3-5 weeks
Narishige's NAI-3L micromanipulators are designed to work specifically with LEICA microscopes including Leica DMI3000B - 6000B. They are compact and provide lots of open working space on the microscope stage without sacrificing operability.
The NAI-3L combines a sturdy 3-axis Mechanical Coarse Manipulator and a Three-axis Fine Joystick Hydraulic Micromanipulator. This system provides remote control for 3-axis fine movement, conveniently at your fingertips.
***Note that this item includes two complete sets of micromanipulators - one for the holding side and one fo r the injecting side.***
Specifications: Coarse movement : 30mm Fine movement : 10mm One full turn of knob : 500um Minimum graduation : 4um Maximum working range in the X-Y plane by a joystick maneuver : 2mm
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Nikon Hydraulic Fine Joystick+ Mechanical Coarse Micromanipulators (pair)
NAI-3N:
$18,918.92
†
- Ships in 3-5 weeks
Narishige's NAI-3N micromanipulators are designed to work specifically with NIKON microscopes including Nikon Models ECLIPSE Ti-E/-U/-S / TE2000-E/-U/-S. They are compact and provide lots of open working space on the microscope stage without sacrificing operability.
The NAI-3N combines a sturdy 3-axis Mechanical Coarse Manipulator and a Three-axis Fine Joystick Hydraulic Micromanipulator. This system provides remote control for 3-axis fine movement, conveniently at your fingertips.
***Note that this item includes two complete sets of micromanipulators - one for the holding side and one fo r the injecting side.***
Specifications: Coarse movement : 30mm Fine movement : 10mm One full turn of knob : 500um Minimum graduation : 4um Maximum working range in the X-Y plane by a joystick maneuver : 2mm
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Olympus Hydraulic Fine Joystick+ Mechanical Coarse Micromanipulators (pair)
NAI-3O:
$18,918.92
†
- Ships in 3-5 weeks
Narishige's NAI-3O micromanipulators are designed to work specifically with OLYMPUS microscopes including Olympus Model IX71 and IX-51. They are compact and provide lots of open working space on the microscope stage without sacrificing operability.
The NAI-3O combines a sturdy 3-axis Mechanical Coarse Manipulator and a Three-axis Fine Joystick Hydraulic Micromanipulator. This system provides remote control for 3-axis fine movement, conveniently at your fingertips.
***Note that this item includes two complete sets of micromanipulators - one for the holding side and one fo r the injecting side.***
Specifications: Coarse movement : 30mm Fine movement : 10mm One full turn of knob : 500um Minimum graduation : 4um Maximum working range in the X-Y plane by a joystick maneuver : 2mm
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Zeiss Hydraulic Fine Joystick+ Mechanical Coarse Micromanipulators (pair)
NAI-3Z:
$18,918.92
†
- Ships in 3-5 weeks
Narishige's NAI-3Z micromanipulators are designed to work specifically with CARL ZEISS microscopes including Carl Zeiss Models Axio Observer / Axiovert200. They are compact and provide lots of open working space on the microscope stage without sacrificing operability.
The NAI-3Z combines a sturdy 3-axis Mechanical Coarse Manipulator and a Three-axis Fine Joystick Hydraulic Micromanipulator. This system provides remote control for 3-axis fine movement, conveniently at your fingertips.
***Note that this item includes two complete sets of micromanipulators - one for the holding side and one fo r the injecting side.***
Specifications: Coarse movement : 30mm Fine movement : 10mm One full turn of knob : 500um Minimum graduation : 4um Maximum working range in the X-Y plane by a joystick maneuver : 2mm
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Motor (Pulse) Microdrive Micromanipulators
Motor-drive Manipulator
MM-94:
$5,448.65
†
This motor-drive coarse manipulator is used to position a pipette within the microscope's field of view, where it can then be micromanipulated more precisely with a fine hydraulic micromanipulator such as the MMO-4. It is controlled remotely using the electronic joystick. The Z-axis moves at double the speed of X/Y-axis, to facilitate changing samples rapidly. The MM-94 includes the drive unit for right-sided use, the joystick controller, and a dual control unit / power supply. * The MM-94 is the model for right-sided use, while the MM-94B is for left-sided use. For a full setup, with manipulation on both sides, you can add the MM-94B, and the two units can share the same control unit / power supply that comes with the MM-94.
For a smaller footprint on your microscope table, the MM-94 control box can be held vertically with the use of the control box stand (PS-1).
Specification
Accessories included
Power cord, Hex Wrench
Movement range
Coarse
X22mm, Y22mm, Z22mm
Driving speed
X/Y Axis
1.4mm/s (with use of high-speed button) Maximum speed 0.7mm/s (with use of speed adjusting knob) Minimum speed 0.1mm/s (with use of speed adjusting knob)
Z Axis
2.8mm/s (with use of high-speed button) Maximum speed 1.4mm/s (with use of speed adjusting knob) Minimum speed 0.2mm/s (with use of speed adjusting knob)
Power consumption
Approx. 10W
Dimensions/Weight
Control unit
W204 x D135 x H62mm, 1.05kg
Controller
W70 x D100 x H120mm, 530g, Connecting cable (1.2m)
Drive unit
W85 x D112 x H144mm, 591g, Connecting cable (1.2m)
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Motor-drive Manipulator (Add On)
MM-94B:
$3,632.43
†
MM-94B is an add-on type manipulator for left-side use of the MM-94, and it can be used sharing the same control unit of MM-94. Adding the MM-94B to your MM-94 setup will enable motor drive operation on both sides.
Since the MM-94B does not include the control unit, MM-94 is required to use MM-94B.
Specification
Accessories included
Hex Wrench
Movement range
Coarse
X22mm, Y22mm, Z22mm
Driving speed
X/Y Axis
1.4mm/s (with use of high-speed button) Maximum speed 0.7mm/s (with use of speed adjusting knob) Minimum speed 0.1mm/s (with use of speed adjusting knob)
Z Axis
2.8mm/s (with use of high-speed button) Maximum speed 1.4mm/s (with use of speed adjusting knob) Minimum speed 0.2mm/s (with use of speed adjusting knob)
Power consumption
Approx. 10W
Dimensions/Weight
Controller
W70 x D100 x H120mm, 530g, Connecting cable (1.2m)
Drive unit
W85 x D112 x H144mm, 591g, Connecting cable (1.2m)
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Oil Hydraulic Micromanipulators
Single-Axis Oil Hydraulic Fine Micromanipulator
MMO-220C:
$2,594.59
†
- Ships in 1-5 days
Single-Axis Oil Hydraulic Micromanipulator
Narishige's MMO-220C is a one-dimensional oil hydraulic micromanipulator that adds fine movement capability in the same direction as the pipette.
When using this unit to insert a pipette into the cell, you can make movement along the axis of the pipette, which minimizes the chance of damaging the cell. This single-axis oil hydraulic micromanipulator is typically used as an add-on micromanipulator to one that handles the other 3 axes. The MMO-220C comes with its own magnetic mount included so that the control knob can be positioned within easy reach and is an update to the discontinued MMO-220B.
* Compare below with the MMO-220A that features a high-precision vernier dial.
10mm Full rotation of knob 250um Minimum graduation 1um
10mm Full rotation of knob 250um Minimum graduation 10um
Dimensions/Weight
Control unit
W70×D115×H100mm, 1.15kg
W55×D45×H80mm, 140g
Drive unit
W45×D20×H35mm, 90g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
The MMO-4 micromanipulator features an oil hydraulic joystick that allows for smooth three-dimensional movement with a single control. This updated model works from both the left and right side of the sample without any conversion. Improved joystick movement is the key to greater control, and it reduces the risk of unwanted drift as well. The ergonomic hanging joystick enables users to keep their arms and hands on the table in a natural posture for comfortable prolonged use. An improved universal joint (UT-10) is also included, for stable, accurate attachment of a pipette holder and easy setting of pipette angle.
*For attachment to the microscope, a coarse manipulator and suitable mounting adaptor are required (sold separately). *Select Type B adaptor for mounting this manipulator in combination with MMN-1 coarse manipulator. *Changing the universal joint included with the micromanipulator to the double pipette holder HD-21 (sold separately) enables performance of embryo biopsy. *Changing the universal joint that attaches the micromanipulator to MMO-220A/MMO-220B single-axis oil hydraulic micromanipulator enables four-dimensional remote controlled movement. *In combination with the return mechanism UT-R (sold separately), MMO-4 enables mechanisms of retracting the pipette. Specification
Accessories included
IP Iron Plate, UT-10 Universal Joint (with Angle Gauge)
Movement range
Fine
X10mm, Y10mm, Z10mm Full rotation of knob: 250um Minimum graduation: 2um
Joystick (for maximum movement in X-Y plane) 2mm
Dimensions/Weight
Control unit
W177 x D70 x H178mm, 1.76kg
Drive unit
W70 x D40 x H87mm, 168g
Hydraulic Tube Length
0.9m
FAQ's
Q: What is the main advantage of the MMO-4 hydraulic micromanipulator over the MN-151 mechanical micro manipulator?
A: With a mechanical micromanipulator like the MN-151, the user touches the actual micromanipulator to move the joystick. This can introduce some vibration and some torque during movement. With a hydraulic micromanipulator like the MMO-4, the joystick is separated from the micromanipulator by the hydraulic tubes, so the user doesn't touch it, and so the movement is smooth and well isolated.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Joystick Type Oil Hydraulic Fine Micromanipulator
MO-202U:
$7,675.68
†
- In Stock
Narishige's MO-202U is a oil hydraulic joystick manipulator capable of a smooth three-dimensional operation using a single lever. Since that time, it has been widely used by many customers, whose requests for restoration of its former shape and other discontinued features are met in this latest model. Those features include the tall upright joystick control section with plastic hand-rest and full, 500µm rotation movement. In addition, a slimmer driving unit and attachment of the UT-2 as an accessory make this model easier than ever to use.
*For attachment to the microscope, a coarse manipulator and suitable adaptor are required (sold separately). *Select Type B adaptor for mounting this manipulator in combination with MMN-1 coarse manipulator. *Changing the universal joint that attaches the micromanipulator to such double pipette holder as HDO-20 (sold separately) enables performance of embryo biopsy. *Changing the universal joint that attaches the micromanipulator to MMO-220A/MMO-220B single-axis oil hydraulic micromanipulator enables four-dimensional remote controlled movement.
Specification
Accessories included
UT-2 Universal Joint, CF-3 Tube Fixture, Allen Wrench
Movement range
Fine
X10mm, Y10mm, Z10mm Full rotation of knob: 500um Minimum graduation: 5um
Joystick (for maximum movement in X-Y plane): 2mm
Dimensions/Weight
Control unit
W135 x D135 x H210mm, 1.85kg
Drive unit
W40 x D39 x H82mm, 0.17kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
