URC-1 is an extension bar for use with the Little Giant series. A male screw (M3mm) is provided at one end of the bar while a (female) screw hole (M3mm) is provided at the other, so the bar can be connected or removed as necessary. Recommended for use when the compact magnetic stand height needs to be raised
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Water Hydraulic Micromanipulators
Independently usable one-axis water hydraulic micromanipulator for stereomicroscopes (Magnetic Mount)
MWS-32:
$5,459.46
†
- Ships in 1-5 days
Narishige's MWS-32 combines a magnetic stand with the MWS-31, so that it can be used independently. Direct attachment to the magnetic stand provides enhanced stability required for applications with stereo microscopes. Like MWS-31, MWS-32 also has a water hydraulic 1:5 cartridge system, angle adjustment mechanism for firm fixing, and a rigid manual coarse manipulator. A unique feature of MWS-32 is that the manipulator is fixed directly to a rigid magnetic stand, thereby making the vertical adjustments more stable. This integration of the magnetic stand allows independent use in a variety of applications by freeing the manipulator from a stereomicroscope.
X38mm, Y25mm, Z30mm With tension adjustment mechanism
Fine
2mm Full rotation of knob 50µm Minimum graduation 0.2µm
Dimensions/Weight
Control unit
W70 × D115 × H100mm, 1.15kg
Drive unit
W200 × D100 × H240mm, 2.45kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
You Limited Accessories
Mounting Rod (10mm Diameter)
UR-10:
$59.46
†
- Ships in 1-5 days
Narishige's UR-10, used in combination with a compact magnetic stand and an X-block, enables the standard UM series manipulators to be installed on the microscope stage.
* Used in combination with a compact magnetic stand (USM-10 ) /an X-block (UX-10-10 ), this bar allows the standard UM series micromanipulators (UM-1FC / UM-1F / UM-1C ) to be installed on the microscope stage.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Threaded Bar
URC-2:
$27.03
†
- Discontinued
URC-2 is an extension bar for use with the Little Giant series. A male screw (M3mm) is provided at one end of the bar while a (female) screw hole (M3mm) is provided at the other, so the bar can be connected or removed as necessary. Recommended for use when the compact magnetic stand height needs to be raised
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Threaded Bar
URC-4:
$59.46
†
- Ships in 1-5 days
URC-4 is an extension bar for use with the Little Giant series. A male screw (M3mm) is provided at one end of the bar while a (female) screw hole (M3mm) is provided at the other, so the bar can be connected or removed as necessary. Recommended for use when the compact magnetic stand height needs to be raised
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Magnetic Stand (Mounting Rod 10mm)
USM-10:
$210.81
†
- Ships in 1-5 days
The magnetic stand is for use with the Little Giant series. The use of a strong magnet ensures excellent stability, and the mechanism to release the magnet operates easily. Since a connecting type bar is used, height adjustment can be performed freely.
To extend the length of the bar, obtain an extension bar (URC-4) sold separately.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Magnetic Stand (Mounting Rod 6mm)
USM-6:
$210.81
†
- Ships in 1-5 days
The magnetic stand is for use with the Little Giant series. The use of a strong magnet ensures excellent stability, and the mechanism to release the magnet operates easily. Since a connecting type bar is used, height adjustment can be performed freely.
To extend the length of the bar, obtain an extension bar (URC-4) sold separately.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Magnet attachment
USM-A:
$129.73
†
- Ships in 1-5 days
Permits direct attachment to a magnetic stage without having to use magnetic stands / X-blocks to ensure high stability as well as freedom to fix in a desired position.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
X-Block with 6mm and 10mm bar holes
UX-6-10:
$97.30
†
- Ships in 1-5 days
This X-block is used to combine two kinds of bars, enabling you to fix two kinds of bars vertically, which is necessary for combining a magnetic stand with a manipulator. With the fixing screws aligned in one direction, it takes up minimal space. Each fixing bar is different in both diameter and length, so you can select the right one for your intended use.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
X-Block with 6mm bar holes
UX-6-6:
$86.49
†
- Ships in 1-5 days
This X-block is used to combine two kinds of bars, enabling you to fix two kinds of bars vertically, which is necessary for combining a magnetic stand with a manipulator. With the fixing screws aligned in one direction, it takes up minimal space. Each fixing bar is different in both diameter and length, so you can select the right one for your intended use.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
You Limited Holders
Needle/Electrode Holder
UP-1:
$37.84
†
- In Stock
Narishige's UP-1 is a general holder can hold a 1 - 1.5mm pipette. Recommended for use with standard series products.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Needle/Electrode Holder (for 2-3mmø)
UP-23:
$59.46
†
- Ships in 1-5 days
Narishige's UP-23 general holder can hold a 2 - 3mm pipette. Recommended for use with standard series products.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Needle/Electrode Holder, Tapered (for 1mmø)
UPF-1:
$51.89
†
- Discontinued
Narishige's UPF-1 holder can hold a 1mm pipette. To save space, the tip is thinner than those of general holders. Recommended for use with standard series products.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Needle/Electrode Holder, w/ ø4mm Bar
UPN-1:
$59.46
†
- Ships in 1-5 days
Narishige's UPN-1 general holder is used to hold a 1 - 1.2mm pipette. Recommended for use with the Little Giant series products.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Needle/Electrode Holder, w/ ø4mm Bar w/ angle adjustment
UPN-10:
$86.49
†
- Ships in 1-5 days
Narishige's UPN-10 holder can hold a 1 - 1.2mm pipette and permits setting an offset and an independent angle on the holding section. Since angles are set on two sections, it passes easily over obstacles like the wall of a dish. Recommended for use with our Little Giant series products such as YOU-3, YOU-4, US-3F, and U-31CF.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Needle/Electrode Holder, w/ ø4mm Bar w/ angle adjustment
UPN-20:
$70.27
†
- Ships in 1-5 days
This holder can hold a ø1 - 1.2mm pipette and permits setting an independent angle on the holding section. Recommended for use with our Little Giant series products such as YOU-3, YOU-4, US-3F, and U-31CF.
Q: Over what angle does the UPN-20 electrode holder rotate?
A: The holder portion can rotate at least +90 and -90 degrees relative to the mounting rod. So with the electrode holder horizontal, the post could be either vertical upward or vertical downward.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Ball Joint
UPN-B:
$237.84
†
- Ships in 1-5 days
This is a ball joint for setting the holder at variable angles. By adding this ball joint between the micromanipulator and the needle/electrode holder, you get an additional 2 degrees of freedom to choose the angle with otherwise-fixed components. Recommended for use in conjunction with a 4mm holder (MINJ-4 / UPN-1 / UPN-C) intended for the Little Giant series products such as YOU-3 and U-31CF.
Specifications
Dimensions/Weight
W37 × H25mm, 11g
Holder
ø4mm
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Pipette holder
UPN-C:
$129.73
†
- Ships in 1-5 days
This is a compact holder to hold ø1mm outside diameter glass needles or electrodes. Since the needle is centered on the holder's axis, no fixing section is needed and this holder is very compact.
Though hard to see in the photo, there is a hole that goes through the entire holder, so if you attach a 4mm inside diameter tube to the back, you can pressurize the needle.
For more needle holding solutions, check out our MINJ-4 and HI-9.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Pipette Holder (for 1mmø) 7mm Diameter
UPZ-1:
$140.54
†
- Ships in 1-5 days
Narishige's UPZ-1 holder can hold a 1mm pipette and set it at an independent angle on the holding section. Recommended for use with standard series products.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Pipette Holder (for 2-3mmø) 7mm Diameter
UPZ-23:
$140.54
†
- Special Order
Narishige's UPZ-23 holder can hold a 2 - 3mm pipette and set it at an independent angle on the holding section. Recommended for use with standard series products.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
You Limited Stage Plate
You Limited Stage Plate
USP-A:
$64.86
†
- Discontinued
Permits direct attachment without having to use magnetic stands / X-blocks to ensure high stability. Fastened by screws through the screw holes in the stage to ensure even more rigid fixing.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Microscope Stage Plate (for Nikon TMD)
USP-N300:
$324.32
†
- Special Order - Pricing Available Upon Request
Narishige's USP-N300 is an iron plate that enables magnets to be placed on the microscope stage. This thin and lightweight plate does not interfere with the movements of the movable X-Y stage, and made of special stainless steel; it permits the use of magnets and is rust-resistant. USP-N300 can be fastened by screws to the microscope stage of the Nikon TMD-200/300, TE200/300, TE2000, and Ti series.
Specification
Dimensions/Weight
W273 × D210 × T2mm, 660g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Microscope Stage Plate (for Olympus IX)
- Special Order - Pricing Available Upon Request
Narishige's USP-OIX is an iron plate that enables magnets to be placed on the microscope stage. This thin and lightweight plate does not interfere with the movements of the movable X-Y stage, and made of special stainless steel; it permits the use of magnets and is rust-resistant. USP-OIX can be fastened by screws to the microscope stage of the Olympus IX50/51/70/71/81.
Specification
Dimensions/Weight
W260 × D200 × T2mm, 660g
* USP-OIX can NOT be fastened to a plain stage.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
You Limited X-Blocks
X-Block with 10mm bar holes
UX-10-10:
$97.30
†
- Ships in 1-5 days
Narishige's UX-10-10 is used to combine two kinds of bars, enabling you to fix two kinds of bars vertically, which is necessary for combining a magnetic stand with a manipulator. With the fixing screws aligned in one direction, it takes up minimal space. Each fixing bar is different in both diameter and length, so you can select the right one for your intended use.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
X-Block with 4mm and 10mm bar holes
UX-4-10:
$91.89
†
- Ships in 1-5 days
Narishige's X-block is used to combine a magnetic stand with a manipulator. The fixing screws are aligned in one direction to minimize the space. Each fixing bar is different in both diameter and length, so you should carefully select the right one for your intended use.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.