†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Spare Anchor for TAKANOME used to affix microinjector holders to MK-1 (2 pieces)
$102.70
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Four Axis Hanging Joystick Oil Hydraulic Micromanipulator
The optimal manipulator specifically made for handling suspension cells
The Narishige TAKANOME MTK-1 4-axis Hanging Joystick Oil Hydraulic Micromanipulator system is a next generation state-of-the-art micromanipulator for laboratory microinjection experiments and In Vitro Fertilization (IVF) procedures. In Japanese, TAKANOME is a metaphor equating this system with a hawk setting its sight on its prey and swooping down precisely, which is exactly what the MTK-1 does. Utilizing improved technology to create elegant simplicity, this advanced system has been especially developed to improve the efficiency of transgenic experiments, IVF, and all procedures involving microinjection of cell suspension cultures.
With a large retraction range of 50mm, the MTK-1 fulfills multiple functions a in single unit, eliminating the need for a separate coarse manipulator. Additionally, this robust micromanipulator includes a innovative design that allows the user to change the pipette angle while keeping the needle tip in the center of the field of view, making angle adjustment a breeze! You can easily switch the pipette from its "home" position to its "working" position, resulting in a significant reduction in the probability of pipette breakage and you will save time by not having to re-position your injection holder each time you change pipettes. With the Narishige MTK-1, you can look forward to a more efficient, precise, and far less painstaking laboratory experience!
MTK-1 Version Compatibility by Microscope Supplier
Supplier
Microscope
Model
Olympus
IX70
MTK-1-O1
IX71
MTK-1-O2
IX73, IX83
MTK-1-O3
Nikon
ECLIPSE TE2000
MTK-1-N1
ECLIPSE Ti
MTK-1-N2
ECLIPSE Ts2R
MTK-1-N3
ECLIPSE Ti2
MTK-1-N4
Carl Zeiss
Axiovert 200, Axio Observer 3/5/7
MTK-1-Z1
Axio Vert.A1
MTK-1-Z2
Leica
DMI3000 B, DMI4000 B, DMI6000 B
MTK-1-L1
DMi8
MTK-1-L2
* If a special adapter is required for a microscope not listed above please contact us.
Specification
Accessories included
Dedicated Mounting Adaptor IP Iron Plate x 2 units Positioning Gauge Anchor x 2 units Hex Wrench Pipette Scale x 2 sheets
Movement range
X/Y/Z-axis
Oil hydraulic control 10mm Full rotation of knob 250µm Minimum graduation 5µm
T-axis (for holder)
Oil hydraulic control 10mm Full rotation of knob 1,000µm Minimum graduation 20µm
Manual (Return and Home position) 50mm
Incident angle 15 ~ 40°
Dimensions/Weight
Control unit
W85.6 x D225 ~ 235 x H151 ~ 171mm, Approx. 1.9kg
Drive unit
W108 ~ 138 x D145 ~ 155 x H100 ~ 150mm, Approx. 820g
Hydraulic tube length
0.6m
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Leica Hydraulic Fine + Motorized Coarse Joystick Micromanipulators (pair)
NAI-2L:
$24,540.54
†
- Ships in 3-5 weeks
Narishige's NAI-2L micromanipulators are designed to work specifically with LEICA microscopes including Leica DMI3000B - 6000B. They are compact and provide lots of open working space on the microscope stage without sacrificing operability and, as such, are the best micromanipulators for IVF / ICSI procedures.
The NAI-2L combines 3-axis Motorized Coarse Manipulator and a Three-axis Fine Oil Hydraulic Micromanipulator, each with its own joystick. This system provides remote control for 3-axis course and fine movement, conveniently at your fingertips.
***Note that this item includes two complete sets of micromanipulators - one for the holding side and one for the injecting side.***
Specifications: Coarse movement : 22mm Fine movement : 10mm (One full turn of knob : 500µm) Minimum graduation : 4µm Maximum working range in the X-Y plane by a joystick maneuver : 2mm
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Nikon Hydraulic Fine + Motorized Coarse Joystick Micromanipulators (pair)
NAI-2N:
$24,540.54
†
- Ships in 3-5 weeks
Narishige's NAI-2N micromanipulators are designed to work specifically with NIKON microscopes including Nikon ECLIPSE Ti-E/-U/-S / TE2000-E/-U/-S. They are compact and provide lots of open working space on the microscope stage without sacrificing operability and, as such, are the best micromanipulators for IVF / ICSI procedures.
The NAI-2N combines 3-axis Motorized Coarse Manipulator and a Three-axis Fine Oil Hydraulic Micromanipulator, each with its own joystick. This system provides remote control for 3-axis course and fine movement, conveniently at your fingertips.
***Note that this item includes two complete sets of micromanipulators - one for the holding side and one for the injecting side.***
Specifications: Coarse movement : 22mm Fine movement : 10mm (One full turn of knob : 500µm) Minimum graduation : 4µm Maximum working range in the X-Y plane by a joystick maneuver : 2mm
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Olympus Hydraulic Fine + Motorized Coarse Joystick Micromanipulators (pair)
NAI-2O:
$24,540.54
†
- Ships in 3-5 weeks
Narishige's NAI-2O micromanipulators are designed to work specifically with Olympus microscopes including the Olympus IX71 and IX-51. They are compact and provide lots of open working space on the microscope stage without sacrificing operability and, as such, are the best micromanipulators for IVF / ICSI procedures.
The NAI-2O combines 3-axis Motorized Coarse Manipulator and a Three-axis Fine Oil Hydraulic Micromanipulator, each with its own joystick. This system provides remote control for 3-axis course and fine movement, conveniently at your fingertips.
***Note that this item includes two complete sets of micromanipulators - one for the holding side and one for the injecting side.***
Specifications: Coarse movement : 22mm Fine movement : 10mm (One full turn of knob : 500µm) Minimum graduation : 4µm Maximum working range in the X-Y plane by a joystick maneuver : 2mm
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Zeiss Hydraulic Fine + Motorized Coarse Joystick Micromanipulators (pair)
NAI-2Z:
$24,540.54
†
- Ships in 3-5 weeks
Narishige's NAI-2Z micromanipulators are designed to work specifically with Zeiss microscopes including Carl Zeiss Models Axio Observer / Axiovert200. They are compact and provide lots of open working space on the microscope stage without sacrificing operability and, as such, are the best micromanipulators for IVF / ICSI procedures.
The NAI-2Z combines 3-axis Motorized Coarse Manipulator and a Three-axis Fine Oil Hydraulic Micromanipulator, each with its own joystick. This system provides remote control for 3-axis course and fine movement, conveniently at your fingertips.
***Note that this item includes two complete sets of micromanipulators - one for the holding side and one for the injecting side.***
Specifications: Coarse movement : 22mm Fine movement : 10mm (One full turn of knob : 500µm) Minimum graduation : 4µm Maximum working range in the X-Y plane by a joystick maneuver : 2mm
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Leica Hydraulic Fine Joystick+ Mechanical Coarse Micromanipulators (pair)
NAI-3L:
$18,918.92
†
- Ships in 3-5 weeks
Narishige's NAI-3L micromanipulators are designed to work specifically with LEICA microscopes including Leica DMI3000B - 6000B. They are compact and provide lots of open working space on the microscope stage without sacrificing operability.
The NAI-3L combines a sturdy 3-axis Mechanical Coarse Manipulator and a Three-axis Fine Joystick Hydraulic Micromanipulator. This system provides remote control for 3-axis fine movement, conveniently at your fingertips.
***Note that this item includes two complete sets of micromanipulators - one for the holding side and one fo r the injecting side.***
Specifications: Coarse movement : 30mm Fine movement : 10mm One full turn of knob : 500um Minimum graduation : 4um Maximum working range in the X-Y plane by a joystick maneuver : 2mm
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Nikon Hydraulic Fine Joystick+ Mechanical Coarse Micromanipulators (pair)
NAI-3N:
$18,918.92
†
- Ships in 3-5 weeks
Narishige's NAI-3N micromanipulators are designed to work specifically with NIKON microscopes including Nikon Models ECLIPSE Ti-E/-U/-S / TE2000-E/-U/-S. They are compact and provide lots of open working space on the microscope stage without sacrificing operability.
The NAI-3N combines a sturdy 3-axis Mechanical Coarse Manipulator and a Three-axis Fine Joystick Hydraulic Micromanipulator. This system provides remote control for 3-axis fine movement, conveniently at your fingertips.
***Note that this item includes two complete sets of micromanipulators - one for the holding side and one fo r the injecting side.***
Specifications: Coarse movement : 30mm Fine movement : 10mm One full turn of knob : 500um Minimum graduation : 4um Maximum working range in the X-Y plane by a joystick maneuver : 2mm
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Olympus Hydraulic Fine Joystick+ Mechanical Coarse Micromanipulators (pair)
NAI-3O:
$18,918.92
†
- Ships in 3-5 weeks
Narishige's NAI-3O micromanipulators are designed to work specifically with OLYMPUS microscopes including Olympus Model IX71 and IX-51. They are compact and provide lots of open working space on the microscope stage without sacrificing operability.
The NAI-3O combines a sturdy 3-axis Mechanical Coarse Manipulator and a Three-axis Fine Joystick Hydraulic Micromanipulator. This system provides remote control for 3-axis fine movement, conveniently at your fingertips.
***Note that this item includes two complete sets of micromanipulators - one for the holding side and one fo r the injecting side.***
Specifications: Coarse movement : 30mm Fine movement : 10mm One full turn of knob : 500um Minimum graduation : 4um Maximum working range in the X-Y plane by a joystick maneuver : 2mm
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Zeiss Hydraulic Fine Joystick+ Mechanical Coarse Micromanipulators (pair)
NAI-3Z:
$18,918.92
†
- Ships in 3-5 weeks
Narishige's NAI-3Z micromanipulators are designed to work specifically with CARL ZEISS microscopes including Carl Zeiss Models Axio Observer / Axiovert200. They are compact and provide lots of open working space on the microscope stage without sacrificing operability.
The NAI-3Z combines a sturdy 3-axis Mechanical Coarse Manipulator and a Three-axis Fine Joystick Hydraulic Micromanipulator. This system provides remote control for 3-axis fine movement, conveniently at your fingertips.
***Note that this item includes two complete sets of micromanipulators - one for the holding side and one fo r the injecting side.***
Specifications: Coarse movement : 30mm Fine movement : 10mm One full turn of knob : 500um Minimum graduation : 4um Maximum working range in the X-Y plane by a joystick maneuver : 2mm
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Motor (Pulse) Microdrive Micromanipulators
Stereotaxic Micromanipulator (with Digital Scale)
DSM-11:
$7,027.03
†
- Discontinued
Narishige's DSM-11 stereotaxic micromanipulator digitally displays coordinates calculated by angle in real-time.
The distance traveled by the slider is displayed digitally, improving the efficiency of experiments using stereotaxic instruments. In addition to the DSM-11, which can be used as-is in stereotaxic instruments, the DSM-11D and DSM-15D, which include digital scales on our SM-11 and SM-15 micromanipulators, are provided.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Narishige's MDO-84 is a compact, add-on, fine one-axis micromanipulator.
The MDO-84 is the pencil type micromanipulator (MO-10), a hybrid of oil-hydraulic and stepping motor that offers precise control. Used in combination with a stereotaxic manipulator, the add-on tool allows remote-control with the distance traveled shown on the digital display, as well as variable speed and precision settings- which are impossible to be performed by a manual model. Two setting modes are available: entering speed directly or entering distance and time, in the range of 0.1um/s to 500um/s. The drive unit is small and lightweight so that it can be mounted easily on different manual manipulators.
* Distance between the control unit and motor unit can be extended from original 2.9m(9.5ft) in total to 7m(28.2ft) by MD-DCE-7 (sold separately). * Palm-sized compact controller MD-OH-1 (sold separately) is available.
* The control unit controls one drive unit only; cannot control two or more drive units.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Oil Hydraulic Micromanipulators
Three-Axis Oil Hydraulic Fine Micromanipulator (Vernier Type)
MMO-203:
$6,216.22
†
- Ships in 1-5 days
Narishige's MMO-203 is a three axis oil hydraulic fine micromanipulator with a large handle offering excellent linearity.
This micromanipulator's hydraulic drive system can be remote controlled, and provides smooth, vibration-free movements. As successor to the vernier type, it features a big cylinder control unit which enables very fine operation. Another key feature is high reproduction of the linear position. Compared with the currently popular joystick method, this control unit has a long record of use among discerning customers because of its simple design and outstanding cost-efficiency. For microinjection systems, this model is recommended for use on the cell holding side, in combination with a joystick type manipulator.
*For attachment to the microscope, a coarse manipulator and suitable adaptor are required (sold separately). *Select Type B adaptor for mounting this manipulator in combination with MMN-1 coarse manipulator. *Changing the universal joint that attaches the micromanipulator to such double pipette holder as HDO-20 (sold separately) enables performance of embryo biopsy. *Changing the universal joint that attaches the micromanipulator to MMO-220A single-axis oil hydraulic micromanipulator enables four-dimensional remote controlled movement.
X10mm, Y10mm, Z10mm Full rotation of knob 250um Minimum graduation 1um
Dimensions/Weight
Control unit
W115 x D115 x H132mm, 1.6kg
Drive unit
W70 x D50 x H80mm, 0.15kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Single-Axis Oil Hydraulic Fine Micromanipulator (Vernier Type)
MMO-220A:
$2,864.86
†
- Ships in 1-5 days
Narishige's MMO-220A is a one-dimensional oil hydraulic micromanipulator that adds fine movement capability in the same direction as the pipette.
When using this unit to insert a pipette into the cell, operators can make further movement along the axis of the pipette, which minimizes the chance of damaging the cell. This single-axis oil hydraulic micromanipulator is typically use as an add-on manipulator. The compact drive unit is installed on the tip of a ball joint, adding the same high precision as a general oil hydraulic micromanipulator. The MMO-220A uses a standard drum and can be combined with any kind of three-dimensional manipulator, including lower-cost mechanical units.
Compare to the MMO-220C that features a small handle with magnetic mount that can be attached near a 3-axis oil hydraulic joystick or other micromanipulator.
Specification
Model
MMO-220A
MMO-220C
Movement range
Fine
10mm Full rotation of knob 250um Minimum graduation 1um
10mm Full rotation of knob 250um Minimum graduation 10um
Dimensions/Weight
Control unit
W70 x D115 x H100mm, 1.15kg
W55 x D45 x H80mm, 140g
Drive unit
W45 x D20 x H35mm, 90g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Single-Axis Oil Hydraulic Fine Micromanipulator
MMO-220C:
$2,594.59
†
- Ships in 1-5 days
Single-Axis Oil Hydraulic Micromanipulator
Narishige's MMO-220C is a one-dimensional oil hydraulic micromanipulator that adds fine movement capability in the same direction as the pipette.
When using this unit to insert a pipette into the cell, you can make movement along the axis of the pipette, which minimizes the chance of damaging the cell. This single-axis oil hydraulic micromanipulator is typically used as an add-on micromanipulator to one that handles the other 3 axes. The MMO-220C comes with its own magnetic mount included so that the control knob can be positioned within easy reach and is an update to the discontinued MMO-220B.
* Compare below with the MMO-220A that features a high-precision vernier dial.
10mm Full rotation of knob 250um Minimum graduation 1um
10mm Full rotation of knob 250um Minimum graduation 10um
Dimensions/Weight
Control unit
W70×D115×H100mm, 1.15kg
W55×D45×H80mm, 140g
Drive unit
W45×D20×H35mm, 90g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
The MMO-4 micromanipulator features an oil hydraulic joystick that allows for smooth three-dimensional movement with a single control. This updated model works from both the left and right side of the sample without any conversion. Improved joystick movement is the key to greater control, and it reduces the risk of unwanted drift as well. The ergonomic hanging joystick enables users to keep their arms and hands on the table in a natural posture for comfortable prolonged use. An improved universal joint (UT-10) is also included, for stable, accurate attachment of a pipette holder and easy setting of pipette angle.
*For attachment to the microscope, a coarse manipulator and suitable mounting adaptor are required (sold separately). *Select Type B adaptor for mounting this manipulator in combination with MMN-1 coarse manipulator. *Changing the universal joint included with the micromanipulator to the double pipette holder HD-21 (sold separately) enables performance of embryo biopsy. *Changing the universal joint that attaches the micromanipulator to MMO-220A/MMO-220B single-axis oil hydraulic micromanipulator enables four-dimensional remote controlled movement. *In combination with the return mechanism UT-R (sold separately), MMO-4 enables mechanisms of retracting the pipette. Specification
Accessories included
IP Iron Plate, UT-10 Universal Joint (with Angle Gauge)
Movement range
Fine
X10mm, Y10mm, Z10mm Full rotation of knob: 250um Minimum graduation: 2um
Joystick (for maximum movement in X-Y plane) 2mm
Dimensions/Weight
Control unit
W177 x D70 x H178mm, 1.76kg
Drive unit
W70 x D40 x H87mm, 168g
Hydraulic Tube Length
0.9m
FAQ's
Q: What is the main advantage of the MMO-4 hydraulic micromanipulator over the MN-151 mechanical micro manipulator?
A: With a mechanical micromanipulator like the MN-151, the user touches the actual micromanipulator to move the joystick. This can introduce some vibration and some torque during movement. With a hydraulic micromanipulator like the MMO-4, the joystick is separated from the micromanipulator by the hydraulic tubes, so the user doesn't touch it, and so the movement is smooth and well isolated.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Single-Axis Oil Hydraulic Fine Micromanipulator
MO-10:
$2,540.54
†
- Ships in 1-5 days
Narishige's MO-10 is a pencil type oil hydraulic manipulator designed for use with a three-dimensional manipulator. Instead of employing a large cylinder with speed reduction gear, like the MO-8, its control unit uses a general drum type. Space-efficient installation and economical price are two notable advantages.
Specification
Accessory included
Dedicated electrode holder
Movement range
Fine
10mm, Full rotation of knob 500um Minimum graduation 2um
Dimensions/Weight
Control unit
W70 x D115 x H100mm, 1.15kg
Drive unit
W30 x D20 x H125mm, 50g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Single-Axis Oil Hydraulic Fine Micromanipulator and Three-axis Coarse Micromanipulator
MO-150:
$3,513.51
†
- Discontinued
Narishige's MO-150 is an oil hydraulic single-axis fine micromanipulator capable of approaching the specimen without vibration. Based on the M-152, this version adds the capability of oil hydraulic fine movement on the X-axis, enabling accurate, vibration-free linear approach to the cell with no danger of causing it any serious damage. Employment of the bar mount system provides complete installation flexibility and greatly broadens the range of possible applications.
*For attachment to the microscope, P-1A height adjustment plate (sold separately) and a suitable adaptor is required (standard accessories). *Attached universal joint can be replaced by the MMO-220A single-axis oil hydraulic micromanipulator (sold separately).
X10mm, Full rotation of knob 500um Minimum graduation 2um
Dimensions/Weight
Control unit
W70 x D115 x H100mm, 1.15kg
Driving unit
W94 x D36 x H155mm, 280g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Joystick Type Oil Hydraulic Fine Micromanipulator
MO-202U:
$7,675.68
†
- In Stock
Narishige's MO-202U is a oil hydraulic joystick manipulator capable of a smooth three-dimensional operation using a single lever. Since that time, it has been widely used by many customers, whose requests for restoration of its former shape and other discontinued features are met in this latest model. Those features include the tall upright joystick control section with plastic hand-rest and full, 500µm rotation movement. In addition, a slimmer driving unit and attachment of the UT-2 as an accessory make this model easier than ever to use.
*For attachment to the microscope, a coarse manipulator and suitable adaptor are required (sold separately). *Select Type B adaptor for mounting this manipulator in combination with MMN-1 coarse manipulator. *Changing the universal joint that attaches the micromanipulator to such double pipette holder as HDO-20 (sold separately) enables performance of embryo biopsy. *Changing the universal joint that attaches the micromanipulator to MMO-220A/MMO-220B single-axis oil hydraulic micromanipulator enables four-dimensional remote controlled movement.
Specification
Accessories included
UT-2 Universal Joint, CF-3 Tube Fixture, Allen Wrench
Movement range
Fine
X10mm, Y10mm, Z10mm Full rotation of knob: 500um Minimum graduation: 5um
Joystick (for maximum movement in X-Y plane): 2mm
Dimensions/Weight
Control unit
W135 x D135 x H210mm, 1.85kg
Drive unit
W40 x D39 x H82mm, 0.17kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Single-Axis Oil Hydraulic Fine Microdrive Micromanipulator (Skull Mounting)
MO-95:
$4,972.97
†
- Special Order
Narishige's MO-95 is a remote-controlled oil-hydraulic micromanipulator for chronic experiments on the skulls of middle size animals, mainly monkeys. Employment of the oil hydraulic system enables microelectrodes to be inserted by remote control, without vibration. The chamber method is used, so that slight movements by the subject animal will not dislodge the microelectrode, while attachment/ detachment can be done freely. The acrylic XY stage makes it easy to position the microelectrodes with great accuracy while visually confirming their location. Microelectrodes ranging from 0.3 to 2mm can be used, by adjusting the positions of the packing and the microelectrodes themselves. Since this model uses the microelectrode expose method, any kind of microelectrode can be used. When the chain bar is filled with Ringer's solution, brain activity stops and long time recording becomes possible.
Specification
Accessories included
Chamber, Cap, Stainless Pipe (O.D.0.7 x 60mm), Threaded Bar, Fixing Screws
Movement range
Coarse
Z50mm
Fine
Z10mm, Full rotation of knob 500um Minimum graduation 2um
Dimensions/Weight
Control unit
W70 x D115 x H100mm, 1.15kg
Drive unit
W60 x D60 x H150mm, 100g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Oil Hydraulic Micromanipulator
MO-96:
$6,756.76
†
- Discontinued
Narishige's MO-96 is a oil hydraulic micromanipulator meant to be mounted on the skull of a medium-sized animal such as monkeys to perform chronic experiments. Its 15mm fine movement range permits deeper brain insertion of a microelectrode. The MO-96 allows a separately available guide tube to be fitted for precise positioning and insertion of a microelectrode into hard tissue or deep brain cells. Despite these added features, the drive unit has reduced its weight to lighten the burden on the animal.
Its remotely controlled oil hydraulic system permits vibration-free insertion of a microelectrode. With the detachable/attachable drive unit fixed on the skull mount chamber, even if the animal head moves, the microelectrode can be held in position. A transparent acrylic X-Y stage permits visual observation of the microelectrode insertion. By adjusting the positions of the gasket and the electrode holder, various types of microelectrodes can be used with the MO-96. The skull mount chamber can be filled with Ringer's solution to bring the functioning of the brain to a complete halt, which permits recording for prolonged periods of time.
*Used in combination with a pulse motor microdrive, this system permits even more accurate operation.
Z15mm, Full Turn of Knob500um, Minimum Graduation2um
Dimensions/Weight
Control Unit
W70 x D115 x H100mm Approx. 1.15kg
Drive Unit
W63 x D63 x H112mm Approx. 110g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Oil Hydraulic Micromanipulator
MO-96A:
$6,756.76
†
- Ships in 1-5 days
Narishige's MO-96A is an oil hydraulic micromanipulator meant to be mounted on the skull of a medium-sized animal such as monkeys to perform chronic experiments. Its 15mm fine movement range permits deeper brain insertion of a microelectrode. The MO-96A allows a separately available guide tube to be fitted for precise positioning and insertion of a microelectrode into hard tissue or deep brain cells. Despite these added features, the drive unit has reduced its weight to lighten the burden on the animal.
Its open-type stage permits visual observation of the microelectrode insertion while operating the X- and Y- axis control knobs, and also permits multi-channel operation as well as the use of microelectrodes of various types. The remotely controlled oil hydraulic system permits vibration-free insertion of a microelectrode. With the detachable/attachable drive unit fixed on the skull mount chamber, even if the animal head moves, the microelectrode can be held in position.
*With the drive unit detachable from the chamber, the MO-96A permits the use of chambers
Specifications
Accessories included
Skull Mount Chamber Unit (equipped with a drive unit connector) : 1 unit Chamber Cap (fitted to Skull Mount Chamber) : 1 piece Fixing Screws : 10 pieces Stainless Steel Tubing (f0.7 x 60mm) : 10 pieces Threaded Round Bar : 1 piece Spacer : 1 piece
Movement Range
Coarse
Z50mm
Fine
Z15mm, Full Turn of Knob500um, Minimum Graduation2um
Dimensions/Weight
Control Unit
W70 x D115 x H100mm 1.15kg
Drive Unit
W61 x D46 x H120mm 75g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Oil Hydraulic Micromanipulator (Closed-Type)
MO-97:
$7,405.41
†
- Special Order
Narishige's MO-97 is an oil hydraulic micromanipulator meant to be mounted on the skull of a medium-sized animal such as monkeys to perform chronic experiments. Its 30mm fine movement range permits deeper brain insertion of a microelectrode. The MO-97 allows a separately available guide tube to be fitted for precise positioning and insertion of a microelectrode into hard tissue or deep brain cells. Despite these added features, the drive unit has reduced its weight to lighten the burden on the animal.
Its remotely controlled oil hydraulic system permits vibration-free insertion of a microelectrode. With the detachable/attachable drive unit fixed on the skull mount chamber, even if the animal head moves, the microelectrode can be held in position. A transparent acrylic X-Y stage permits visual observation of the microelectrode insertion. By adjusting the positions of the gasket and the electrode holder, various types of microelectrodes can be used with the MO-97. The skull mount chamber can be filled with Ringer's solution to bring the functioning of the brain to a complete halt, which permits recording for prolonged periods of time.
*Used in combination with a pulse motor microdrive, this system permits even more accurate operation.
Specifications
Accessories included
Chamber Cap 1 piece Stainless Steel Tubing (f0.7 x 60mm) : 10 pieces Threaded Round Bar : 1 piece Fixing Screws : 10 pieces Spacer : 1 piece
Movement Range
Coarse
Z50mm
Fine
Z30mm, Full Turn of Knob500um, Minimum Graduation2um
Dimensions/Weight
Control Unit
W70 x D115 x H100mm, 1.15kg
Drive Unit
W63 x D63 x H121mm, 125g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Oil Hydraulic Micromanipulator (Open-Type)
MO-97A:
$7,405.41
†
- Ships in 1-5 days
Narishige's MO-97A is an oil hydraulic micromanipulator meant to be mounted on the skull of a medium-sized animal such as monkeys to perform chronic experiments. Its 30mm fine movement range permits deeper brain insertion of a microelectrode. The MO-97A allows a separately available guide tube to be fitted for precise positioning and insertion of a microelectrode into hard tissue or deep brain cells. Despite these added features, the drive unit has reduced its weight to lighten the burden on the animal.
Its open-type stage permits visual observation of the microelectrode insertion while operating the X- and Y- axis control knobs, and also permits multi-channel operation as well as the use of microelectrodes of various types. The remotely controlled oil hydraulic system permits vibration-free insertion of a microelectrode. With the detachable/attachable drive unit fixed on the skull mount chamber, even if the animal head moves, the microelectrode can be held in position.
*With the drive unit detachable from the chamber, the MO-97A permits the use of chambers of various shapes. Consult us for details. *Used in combination with a pulse motor microdrive, this system permits even more accurate operation.
Specifications
Accessories included
Skull Mount Chamber Unit (equipped with a drive unit connector) : 1 unit Chamber Cap (fitted to Skull Mount Chamber) : 1 piece Fixing Screws : 10 pieces Stainless Steel Tubing (f0.7 x 60mm) : 10 pieces Threaded Round Bar : 1 piece Spacer : 1 piece
Movement Range
Coarse
Z50mm
Fine
Z30mm, Full Turn of Knob500um, Minimum Graduation2um
Dimensions/Weight
Control Unit
W70 x D115 x H100mm, 1.15kg
Drive Unit
W61 x D46 x H130mm, 95g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instruments
Motor-drive Oil Hydraulic Fine Open-Type Micromanipulator System
MDO-974 is the motor-driven oil-hydraulic micromanipulator suitable for in-vivo experiments on middle-sized animals, mainly NHP primates. Based on the manual oil-hydraulic mechanism of MO-97, the hybrid model installed with stepping motor enables speed control as well as greater driving precision, which are impossible to be performed by manual model. As a merit of the hydraulic part that requires no electricity, the hydraulic-tubing line keeps some distance from the motor to the animal's head, so that the sound or noise from the motor is suppressed during the experiment. Operational setting for drive is easy to do, which is completed by entering speed directly, or entering distance and time. The range of drive speed is set as 0.1um/s to 500um/s. The speed can be changed on the way to the target, so you can make the electrode closer to the target with a faster speed, and then change it to slower speed as final small-step approach. The closed chamber is equipped with acrylic XY stage which control knobs drive 18mm on each axis.
* Distance between the control unit and motor unit can be extended from original 2.9m(9.5ft) in total to 7m(28.2ft) by MD-DCE-7 (sold separately). * Palm-sized compact controller MD-OH-1 (sold separately) is also available.
Specifications
Accessories included
Chamber (MO-903E) Chamber Cap SS Guide Tube (ø0.7 × 60mm) Threaded Round Bar Connecting cable (2.9m) Power Cord (2.5m) Spare fuse (inside of fuse holder)
Length of hydraulic tubing
1.5m
Drive source
5-phase Stepping Motor
Movement range
Coarse
Z50mm
Fine
X13mm Y18mm Z30mm (Motor drive)
Setting range
Speed range
0.1um/s ~ 500um/s (0.1um/s increment)
Distance range
1um ~ 30,000um (1um increment)
Time range
1s ~ 60min (0.1s increment)
Working voltage
AC100V ~ 240V, 50/60Hz
Power consumption
15W
Dimensions/Weight
Drive Unit
W61 x D46 x H130mm, 125g
Motor Drive
W98 x D32 x H56mm, approx. 250g
Control unit
W180 x D260 x H95mm, 2.5kg
* The control unit controls one drive unit only; cannot control two or more drive units.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Motor-drive Oil Hydraulic Fine Open-Type Micromanipulator System
MDO-974A is a motor-driven oil-hydraulic micromanipulator suitable for in-vivo experiments on middle-sized animals, mainly NHP primates. Based on the manual oil-hydraulic mechanism of the MO-97A, the hybrid model installed with stepping motor enables speed control as well as greater driving precision, which are impossible to be performed by manual model. As a merit of the hydraulic part that requires no electricity, the hydraulic-tubing line keeps some distance from the motor to the animal's head, so that sound or noise from the motor is suppressed during the experiment. Operational setting for drive is easy to do, which is completed by entering speed directly, or entering distance and time. The range of drive speed is set as 0.1um/s to 500um/s. The speed can be changed on the way to the target, so you can make the electrode closer to the target with a faster speed, and then change it to a slower speed as final small-step approach. The chamber is an open-type that is designed to accommodate multiple drive units and use with grid.
* Distance between the control unit and motor unit can be extended from original 2.9m(9.5ft) in total to 7m(28.2ft) by MD-DCE-7 (sold separately). * Palm-sized compact controller MD-OH-1 (sold separately) is also available. * Grid for the open chamber is available by customized order.
Specifications
Accessories included
Chamber (MO-903E) Chamber Cap SS Guide Tube (ø0.7 × 60mm) Threaded Round Bar Connecting cable (2.9m) Power Cord (2.5m) Spare fuse (inside of fuse holder)
Length of hydraulic tubing
1.5m
Drive source
5-phase Stepping Motor
Movement range
Coarse
Z50mm
Fine
X13mm Y18mm Z30mm (Motor drive)
Setting range
Speed range
0.1um/s ~ 500um/s (0.1um/s increment)
Distance range
1um ~ 30,000um (1um increment)
Time range
1s ~ 60min (0.1s increment)
Working voltage
AC100V ~ 240V, 50/60Hz
Power consumption
15W
Dimensions/Weight
Drive Unit
W61 x D46 x H130mm, 125g
Motor Drive
W98 x D32 x H56mm, approx. 250g
Control unit
W180 x D260 x H95mm, 2.5kg
* The control unit controls one drive unit only; cannot control two or more drive units.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Water Hydraulic Micromanipulators
Three-Axis Water Hydraulic Fine Micromanipulator (1:1 System)
MHW-103:
$6,486.49
†
- Ships in 1-5 days
Narishige's MHW-103 is a liquid hydraulic micromanipulators developed for patch clamping generally use the 1:5 cartridge system to solve the problem of drifting. It has a wide driving range while keeping drift to a minimum. Since this can limit their driving range to as little as 2mm, customers who want a wide driving range are recommended to choose this product, which uses a 1:1 cartridge. The drum type control unit has a large handle for precise operation and high linear repeatability. The water hydraulic system is less prone to drift caused by changes in temperature than an oil hydraulic system, and is thus more suitable for patch clamping. A coarse manipulator is not mounted, so one must be purchased separately.
*For attachment to the microscope, a coarse manipulator and suitable adaptor are required (sold separately). *Select Type B adaptor for mounting this manipulator in combination with MMN-1 coarse manipulator.
X10mm, Y10mm, Z10mm Full rotation of knob 250µm Minimum graduation 1µm
Dimensions/Weight
Control unit
W115 × D115 × H132mm, 1.6kg
Drive unit
W70 × D50 × H80mm, 150g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Water Hydraulic Fine Micromanipulator
MHW-3:
$7,945.95
†
- Ships in 1-5 days
Narishige's MHW-3 is a water hydraulic micromanipulator specially designed for patch clamping. Its water hydraulic system has a lower coefficient of expansion than an oil hydraulic system, and allows precise movement. A 1:5 cartridge is incorporated to minimize drifting. The large, rigid driving unit enables fine movements and coarse manipulations and a sturdy ball joint is also used. Installation is made more rigid by securing attachments to the bar. The drum type control unit has a large handle for precise operation and high linear repeatability. Overall, design considerations are focused on precision movement and stability over long periods of time. This model set the standards for subsequent models of micromanipulators for patch clamping.
*For attachment to the microscope, a suitable adaptor is required (sold separately). *The micromanipulator can be mounted directly on the isolation table. *This model can be firmly fixed to any part of the isolation table with GJ-12 thin-type magnetic stand (sold separately). *AP-12A/AP-12L/AP-12N/AP-13-2 patch clamp headstage holders can be attached on the B-9 ball joint, incorporated in the manipulator . *Combining the ball joint that attaches the micromanipulator with MHW-4 single-axis water hydraulic micromanipulator enables four-dimensional remote controlled movement.
X30mm, Y30mm, Z30mm Full rotation of knob: approx. 4mm
Fine
X2mm, Y2mm, Z2mm Full rotation of knob: 50um Minimum graduation: 0.2um
Dimensions/Weight
Control unit
W115 x D115 x H132mm, 1.6kg
Drive unit
W155 x D155 x H100mm, 900g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Single-Axis Water Hydraulic Fine Micromanipulator (For Patch Clamp Work)
MHW-4:
$2,378.38
†
- Ships in 1-5 days
Narishige's MHW-4 is an add-on type single-axis water hydraulic micromanipulator, attachable to ball joint B-9.
Made for use with the MHW-3 in patch clamping applications, it offers excellent stability with minimal drifting.
2mm Full rotation of knob: 50um Minimum graduation: 0.2um
Dimensions/Weight
Control unit
W70 x D115 x H100mm, 1.15kg
Drive unit
W42 x D28 x H41mm, 60g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Single-Axis Water Hydraulic Fine Micromanipulator (For Patch Clamp Work) with wide movement 1:1
MHW-4-1:
$2,594.59
†
- Ships in 1-5 days
Narishige's MHW-4 is an add-on type single-axis water hydraulic micromanipulator, attachable to ball joint B-9.
This unit has a movement range type 1:1, for the 5:1 movement please refer to MHW-4.
2mm Full rotation of knob: 50um Minimum graduation: 0.2um
Dimensions/Weight
Control unit
W70 x D115 x H100mm, 1.15kg
Drive unit
W42 x D28 x H41mm, 60g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Micromanipulator with excellent microinjection performance under low magnifications. (Single-Axis Water Hydraulic System)
MWS-1A:
$3,243.24
†
- Discontinued
Narishige's MWS-1A is intended for performing microinjections under low magnifications using a stereomicroscope. This unit features a single-axis water hydraulic micromanipulator mounted on the MWS-1. Employment of a 1:1 cartridge system produces a movement range as wide as 10mm, so that the MWS-1A can be used for a wide variety of applications other than microinjection.
*For attachment to the microscope, a suitable adaptor is required (sold separately). *AP-14/AP-13-3 patch clamp headstage holders can be attached (sold separately)
Specification
Accessories included
H-1 Electrode Holder, Allen Wrench
Movement range
Coarse
X15mm, Y15mm, Z15mm
Fine
T10mm, Full rotation of knob 250um, Minimum graduation 1um
Dimensions/Weight
Control unit
W70 x D115 x H100mm, 1.15kg
Drive unit
W105 x D115 x H110mm, 370g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Micromanipulator ideal for patch clamping/blind patching using stereo microscopes. (Single-Axis Water Hydraulic System)
MWS-1B:
$3,351.35
†
- Discontinued
Narishige's MWS-1B is intended for patch clamping and blind patching applications under low magnifications using a stereo microscope. This combination presents a single-axis water hydraulic micromanipulator with a 1:5 cartridge system, mounted on the MWS-1. This provides precise movement toward the target area and good stability with minimal drift, all at an economical price.
*For attachment to the microscope, a suitable adaptor is required (sold separately). *AP-14/AP-13-3 patch clamp headstage holders can be attached (sold separately).
Specification
Accessories included
H-1 Electrode Holder, Allen Wrench
Movement range
Coarse
X15mm, Y15mm, Z15mm
Fine
T2mm, Full rotation of knob 50um, Minimum graduation 0.2um
Dimensions/Weight
Control unit
W70 x D115 x H100mm, 1.15kg
Drive unit
W105 x D115 x H110mm, 400g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Coarse Mechanical Micromanipulator with Fine Water Hydraulic Z-Axis Control. Ideal for experiments under low magnification
MWS-31:
$5,135.14
†
- Ships in 1-5 days
Narishige's MWS-31 is a one-axis water hydraulic micromanipulator combined with a three-dimensional manual coarse manipulator for patch clamping applications under low magnifications, such as when using a stereo microscope. Even at low magnifications, vibration is a critical problem, so a large and rigid manual manipulator is used to prevent it. The rotation mechanism makes exchanging pipettes easier, and the water hydraulic 1:5 cartridge system enables more stable and precise operation. An angle adjustment mechanism is equipped on the fine movement section so that an angle can be added for the fine movement section only, while coarse section retains its vertical position. This allows the manipulator angle to be changed between horizontal and vertical while the manipulator itself remains firmly fixed in position.
X38mm, Y25mm, Z30mm With tension adjustment mechanism
Fine
2mm Full rotation of knob 50µm Minimum graduation 0.2µm
Dimensions/Weight
Control unit
W70 × D115 × H100mm, 1.15kg
Drive unit
W190 × D145 × H200mm, 1.15kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Independently usable one-axis water hydraulic micromanipulator for stereomicroscopes (Magnetic Mount)
MWS-32:
$5,459.46
†
- Ships in 1-5 days
Narishige's MWS-32 combines a magnetic stand with the MWS-31, so that it can be used independently. Direct attachment to the magnetic stand provides enhanced stability required for applications with stereo microscopes. Like MWS-31, MWS-32 also has a water hydraulic 1:5 cartridge system, angle adjustment mechanism for firm fixing, and a rigid manual coarse manipulator. A unique feature of MWS-32 is that the manipulator is fixed directly to a rigid magnetic stand, thereby making the vertical adjustments more stable. This integration of the magnetic stand allows independent use in a variety of applications by freeing the manipulator from a stereomicroscope.
X38mm, Y25mm, Z30mm With tension adjustment mechanism
Fine
2mm Full rotation of knob 50µm Minimum graduation 0.2µm
Dimensions/Weight
Control unit
W70 × D115 × H100mm, 1.15kg
Drive unit
W200 × D100 × H240mm, 2.45kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Water Hydraulic Micromanipulator
WR-6:
$7,783.78
†
- Ships in 1-5 days
Narishige's WR-6 is a three-axis water hydraulic micromanipulator that is highly recommended for patch clamping from the microscope stage slide.
Employing a water hydraulic system, which has a lower coefficient of expansion due to temperature changes, this model offers precise movement while minimizing drift by incorporating a 1:5 cartridge. In addition, it integrates both coarse and fine manipulation capabilities by featuring a manual coarse manipulator for each axis. The drum type control unit has a large handle for precise operation and high linear repeatability. Design considerations are focused on precision movement and stability over long periods of time. The WR-6 is outstandingly versatile: when set up, it is attached using a bar mount, but independent setup using a magnetic stand is also possible, as is attachment to the side of the microscope stage with an adaptor.
X2mm, Y2mm, Z2mm Full rotation of knob 50µm, Minimum graduation 0.2µm
Dimensions/Weight
Control Unit
W115 × D115 × H132mm, 1.6kg
Drive Unit
W110 × D60 × H140mm, 0.4kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
