|
Direct-Drive Micromanipulators |
Single-Axis Fine Micromanipulator
| |
M-10F:
$378.38
†
- Special Order
|
|
Narishige's M-10F is a compact one-dimensional fine micromanipulator designed for use on the microscope stage. Attachment is done by using a 4mm bar. The model can be used in combination with many kinds of stands.
Specification
| Accessories | H-7C Pipette Holder, Allen Wrench | | Movement range | Fine | 22mm, Full rotation of knob 500um | | Dimensions/Weight | W57 x D15 x H30mm, 50g |
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Thin Three-Axis Coarse/Fine Micromanipulator
| |
M-3333:
$983.78
†
- Ships in 1-5 days
|
|
Narishige's M-3333 is a thin three-axis coarse/fine micromanipulator. To enable recording from multiple microelectrodes, the body of this model is made as thin as possible, with all the handles positioned in a single direction. Use of the X-Rotating X-Blocks (sold separately), makes it possible to place many microelectrodes close together without taking up too much space.It is of course possible to mount a single-axis fine movement unit on the X-axis for a more careful approach to the specimen.
*Use X-4 X-blocks and GJ-8 magnetic stand or equivalent equipment to attach this model.
*Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 enables remote controlled X axis fine movement.
Specification | Accessories included | H-1 Electrode Holder, Allen Wrench | | Movement range | Coarse | X40mm, Y12mm, Z30mm | | Fine | X7mm, Full rotation of knob: 250um
Minimum graduation: 10um | | Dimensions/Weight | W126 x D43 x H145mm, 340g |
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Three-Axis Coarse/Fine Joystick-Type Micromanipulator with Tilting Apparatus (Bracket Mount)
| |
MJ-1:
$4,270.27
†
- Special Order
|
|
Narishige's MJ-1 is a three-axis coarse/fine micromanipulator with joystick control for better operability. This model's joystick enables micro tools to be freely controlled on both X and Y planes. The moving ratio is changed by rotating the lever, so adjustment is a simple matter.
*For attachment to the microscope, a suitable adaptor is required (sold separately).
Specification
| Accessories | H-1 Electrode Holder, Spanner, Tension Adjustment Pin,
Tension Adjustment Fixture, Allen Wrench | | Movement range | Coarse | X45mm, Y20mm, Z25mm | | Joystick fine movement | 1:450 - 1:30 | | Z coaxial handle | Full rotation of coarse knob 18mm
Full rotation of fine knob 200um | | Dimensions/Weight | W160 x D115 x H220mm, 1.9kg |
*Products categorized as Group-2 are those used in specialized applications. Because of the limited production of these products, they require longer lead times than Group-1 products, and they are non-returnable.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Three-Axis Coarse/Fine Joystick-Type Micromanipulator with Tilting Apparatus (Magnetic Mount)
| |
MJ-2:
$4,594.59
†
- Special Order
|
|
Narishige's MJ-2 is a three-axis coarse/fine micromanipulator freely fixed with a magnetic stand, with joystick control for better operability. Thanks to incorporation of a joystick, micro tools can be freely controlled on both X and Y planes. Rotating the lever changes the moving ratio, so adjustment is easy.
Three-dimensional movement is possible, with coarse movement provided on the X and Y axes, and coaxial coarse and fine movement on the Z axis. The MJ-2 is firmly and freely attached by using the magnetic stand, and the approach angles can be set via the tilting plate.
Specification
| Accessories | H-1 Electrode Holder, Spanner, Tension Adjustment Pin,
Tension Adjustment Fixture, Allen Wrench | | Movement range | Coarse | X45mm, Y20mm, Z25mm | | Joystick fine movement | 1:450 - 1:30 | | Z coaxial handle | Full rotation of coarse knob 18mm
Full rotation of fine knob 200um | | Dimensions/Weight | W160 x D115 x H220mm, 2.9kg |
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Three-Axis Coarse/Fine Micromanipulator (Similar to MM-3)
| |
ML-3:
$1,891.89
†
- Special Order
|
|
Narishige's ML-3 is a three-axis coarse/fine micromanipulator with a large size and rigid design to maximize stability. This model has a large body and rigid construction, like the MM-3, to improve stability. A single-axis fine movement unit is mounted, which moves in the same direction as the microelectrode and allows careful approach to the specimen. Handles on the X and Z axes are placed on both sides for the benefit of both left- and right-handed users, and the handles offer hardness adjustment to prevent them dropping under their own weight.
*Use GJ-2 magnetic stand or equivalent equipment to attach this model.
*Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 remote controlled X axis fine movement.
*For details of using the Type A microscope mounting adapter, please contact us.
Specification
| Accessories | H-1 Electrode Holder, Dedicated electrode holder,
Clamp Rod, Allen Wrench | | Movement range | Coarse | X38mm, Y25mm, Z30mm
With tension adjustment mechanism | | Fine | X35mm, Full rotation of knob 250um
Minimum graduation 10um | | Dimensions/Weight | W110 x D90 x H175mm, 1.3kg |
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Three-Axis Coarse/Fine Micromanipulator with Rotation Mechanism (Tilting Base)
| |
MLN-2:
$3,243.24
†
- Special Order
|
|
Narishige's MLN-2 is a three axis coarse/fine micromanipulator with a tilting stand attachment for improved stability. In addition to main features such as a fine movement unit operating in the same direction as the microelectrode, a rotation mechanism and pivot/tilt capabilities, the MLN-330 is mounted on a tilting stand. This gives better stability than simple bar attachment. The fine movement unit is mounted on the Z-axis and enables fine adjustment of height. The tilting stand features a foldaway angle adjustment pole, so as not to interfere with operation.
*Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 enables remote controlled X axis fine movement.
Specification
| Accessories | H-1 Electrode Holder, Dedicated electrode holder,
Allen Wrench, Mounting Screw, Flat Washer, Clamp Rod | | Movement range | Coarse | X38mm, Y25mm, Z30mm
With tension adjustment mechanism | | Fine | X35mm, Full rotation of knob 250um
Minimum graduation 10um | With rotation mechanism, With pivot and tilt mechanism
With tilting stand, With height adjustment unit | | Dimension | Main body | W110 x D90 x H170mm | | Tilting stand | W130 x D150 x H45mm | | Weight | 4.2kg (includes tilting stand) |
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Three-Axis Coarse/Fine Micromanipulator (with Rotation Mechanism)
| |
MLN-33:
$2,054.05
†
- Special Order
|
|
Narishige's MLN-33 is a three axis coarse/fine micromanipulator equipped with rotation mechanism for easy microelectrode exchange. Like the rigid-design ML-3, this model incorporates a single axis fine movement unit which moves in the same direction as the microelectrode and enables a carefully controlled approach to the specimen. A rotation mechanism is also included, making the exchange of microelectrodes easy. Handles on the X and Z axes are placed on both sides for the benefit of both left- and right-handed users, and the handles offer hardness adjustment to prevent them dropping under their own weight.
*Use GJ-2 magnetic stand or equivalent equipment to attach this model.
*Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 remote controlled X axis fine movement.
*Attachment to the side of microscope stage is possible by using P-1C height adjustment plate (sold separately) and a suitable mounting adaptor.
Specification
| Accessories | H-1 Electrode Holder, Dedicated electrode holder,
Clamp Rod, Allen Wrench | | Movement range | Coarse | X38mm, Y25mm, Z30mm
With tension adjustment mechanism | | Fine | X35mm, Full rotation of knob 250um
Minimum graduation 10um | | With rotation mechanism | | Dimensions/Weight | W110 x D90 x H200mm, 1.4kg |
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Three-Axis Coarse/Fine Micromanipulator (with Tilt and Pivot Mechanism)
| |
MLN-330:
$2,594.59
†
- Special Order
|
|
Narishige's MLN-330 is a high-class micromanipulator with both rotation and pivot/tilt mechanisms. This model features a single-axis fine movement unit which operates in the same direction as the microelectrode and allows careful approach to the specimen.
Handles on the X and Z axes are provided on both side, for the convenience of both left- and right-handed users. The handles also have hardness adjustment to prevent dropping under their own weight. In addition, a rotation mechanism is equipped for easy exchange of microelectrodes, along with pivot and tilting mechanisms to allow precise positioning.
*Use GJ-2 magnetic stand or equivalent equipment to attach this model.
*Attachment to the side of microscope stage is possible by using P-1C height adjustment plate (sold separately) and a suitable mounting adaptor.
*Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 enables remote controlled X axis fine movement.
Specification
| Accessories | H-1 Electrode Holder, Dedicated electrode holder
Clamp Rod, Allen Wrench | | Movement range | Coarse | X38mm, Y25mm, Z30mm
With tension adjustment mechanism | | Fine | X35mm, Full rotation of knob 250um
Minimum graduation 10um | | With rotation mechanism, With pivot and tilt mechanism | | Dimensions/Weight | W110 x D90 x H195mm, 1.5kg |
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Three-Axis Coarse/Fine Compact Micromanipulator
| |
MM-3:
$1,351.35
†
- Ships in 1-5 days
|
|
Narishige's MM-3 is amongst the most popular three axis coarse/fine compact micromanipulator. Its smooth drive and stable controls have made the MM-3 a classic and popular micromanipulator for decades. Single-axis fine movement in the same direction as the microelectrode or needle provides a high level of control when approaching a specimen. The three-axes of coarse movement operate via strudy rack & pinion mechanisms, enabling the microelectrode or needle to be placed near the specimen quickly.
Handles on both sides of the X- and Z-axis make this equipment suitable for both left- and right-handed operators, and a tension adjustment is also available to prevent the unit from dropping under its own weight. If used properly, this model's smoothness and stability will remain unchanged even over several decades of use.
*The MM-3 mounts via an extra-heavy-duty 12mm mounting rod (not included). For mounting next to the microscope or target, use the GJ-8 heavy-duty magnetic stand or equivalent equipment. Contact us for other options if mounting directly to a microscope stage is required for maximum stability.
*It is possible to substitute a hydraulic micromanipulator, such as the MO-10, for the standard H-1 micropipette holder when remote control of X-axis is required.
Specification | Accessories included | H-1 Electrode Holder, Clamp Rod, Allen Wrench | | Movement range | Coarse | X40mm, Y20mm, Z35mm | | Fine | X7mm, Full rotation of knob 250um,
Minimum graduation 10um | | Dimensions/Weight | W105 x D70 x H145mm, 790g |
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Three-Axis Coarse/Fine Micromanipulator with Dual Electrode Holder and Rotation Mechanism
| |
MMD-4:
$1,837.84
†
- Special Order
|
|
Narishige's MMD-4 is a three-axis coarse/fine micromanipulator with a dual electrode holder that enables the attachment of two microelectrodes, in addition to standard MMN-33 features such as fine manipulation on the X-axis and rotation mechanism. The two microelectrodes are placed side by side so that they approach the specimen simultaneously. Special holders are provided to position the microelectrodes closer together than would be possible using conventional holders.
*Use GJ-8 magnetic stand or equivalent equipment to attach this model.
*Attachment to the side of microscope stage is possible by using P-1B height adjustment plate (sold separately) and a suitable mounting adaptor.
Specification
| Accessories | Dedicated Electrode Holders, Clamp Rod, Allen Wrench,
Decoration Screw Long/Short, Dedicated Screw | | Movement | Coarse | X40mm, Y20mm, Z35mm | | Fine | X7mm, Full rotation of knob 250um
Minimum graduation 10um | | With rotaion mechanism | | Dimensions/Weight | W105 x D85 x H175mm, 1kg |
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Three-Axis Coarse/Fine Micromanipulator (with Tilting Mechanism)
| |
MMN-2:
$2,594.59
†
- Special Order
|
|
Narishige's MMN-2 is a three axis coarse/fine micromanipulator with improved stability through attachment on a tilting stand. Along with such standard MMN-330 features as fine manipulation on the X-axis, rotation mechanism and pivot/tilting mechanism, the MMN-2 includes fine movement on the Z-axis for accurate vertical adjustments. In addition, it is mounted on a tilting stand, which offers more stability than conventional bar attachment. The pole for angle adjustment on the stand folds away, so as not to interfere with operation.
*Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 enables remote controlled X axis fine movement.
Specification
| Accessories | H-1 Electrode Holder, Allen Wrench | | Movement range | Coarse | X40mm, Y20mm, Z35mm | | Fine | X7mm, Full rotation of knob 250um
Minimum graduation 10um | | Z15mm, Full rotation of knob 250um | With height adjustment unit,
With fine pivot and tilt mechanism,
With rotation mechanism | | Dimensions/Weight | W195 x D130 x H240mm, 3.4kg |
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Miniature Three-Axis Coarse/Fine Micromanipulator (with Rotation,Pivot,Tilt Mechanism)
| |
MMN-330:
$1,891.89
†
- Special Order
|
|
Narishige's MMN-330 is a miniature 3-axis coarse/fine micromanipulator with pivot and tilt mechanisms for accurate position adjustment. Like the MM-3, single-axis fine movement is equipped on this manipulator in the same direction as the microelectrode, helping to ensure a careful approach to the specimen. X-and Z-axis handles are placed on both sides, for both left- and right-handed users, and feature hardness adjustment to prevent them dropping under their own weight. Pivot and tilt mechanisms are also incorporated to enable very precise positioning adjustment.
*Use GJ-8 magnetic stand or equivalent equipment to attach this model.
*Attachment to the side of microscope stage is possible by using P-1B height adjustment plate (sold separately) and a suitable mounting adaptor.
*Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 enables remote controlled X axis fine movement.
Specification
| Accessories | H-1 Electrode Holder, Clamp Rod, Allen Wrench | | Movement range | Coarse | X40mm, Y20mm, Z35mm | | Fine | X7mm, Full rotation of knob 250um
Minimum graduation 10um | | | Wish pivot and tilt mechanism, With rotation mechanism | | Dimensions/Weight | W110 x D70 x H160mm, 1.1kg |
*Products categorized as Group-2 are those used in specialized applications. Because of the limited production of a wide variety of products, Group-2 products require longer lead times than Group-1 products, and they are non-returnable.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Miniature Three-Axis Coarse/Fine Micromanipulator (with Pivot,Tilt Mechanism)
| |
MMN-333:
$1,675.68
†
- Special Order
|
|
Narishige's MMN-333 is a miniature 3-axis coarse/fine micromanipulator with pivot and tilt mechanisms for accurate position adjustment.
Like the MM-3, single-axis fine movment is equipped on this manipulator in the same direction as the microelectrode, helping to ensure a careful approach to the specimen. X- and Z-axis handles are placed on both sides, for both left- and right-handed users, and feature hardness adjustment to prevent them from dropping under their own weight. Pivot and tilt mechanisms are also incorporated to enable very precise positioning adjustment.
*Use GJ-8 magnetic stand or equivalent equipment to attach this model.
*Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 enables remote controlled X axis fine movement.
*For details of using the Type A microscope mounting adaptor, please contact us.
Specification
| Accessories | H-1 Electrode Holder, Clamp Rod, Allen Wrench | | Movement range | Coarse | X40mm, Y20mm, Z35mm | | Fine | X7mm, Full rotation of knob 250um
Minimum graduation 10um | | | With pivot and tilt mechanism | | Dimensions/Weight | W110 x D70 x H150mm, 900g |
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Miniature Three-Axis Coarse/Fine Micromanipulator (with Rotation,Pivot,Tilt Mechanisms)
| |
MMN-8:
$2,324.32
†
- Special Order
|
|
Narishige's MMN-8 is a miniature 3-axis coarse/fine micromanipulator with a stable, space-efficient heavy weight stand. Incorporating standard MMN-330 features such as fine manipulation on the X-axis, rotation mechanism and pivot/tilting mechanism, this model also offers fine movement on the Z-axis for accurate adjustments of both height and tilting angle. Excellent stability and space efficiency are provided by mounting on a heavy weight stand.
*Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 enables remote controlled X axis fine movement.
Specification
| Accessories | H-1 Electrode Holder, Clamp Rod, Allen Wrench | | Movement range | Coarse | X40mm, Y20mm, Z35mm | | Fine | X7mm, Full rotation of knob 250um
Minimum graduation 10um | | Z15mm, Full rotation of knob 250um | With pivot and tilt mechanism, With rotaion mechanism,
With vertical adjustment unit | | Dimensions/Weight | W180 x D150 x H220mm, 3.4kg |
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Miniature Three-Axis Coarse/Fine Micromanipulator (with Rotation,Pivot,Tilt, Height Adjustment Mechanisms)
| |
MMN-9:
$2,486.49
†
- Special Order
|
|
Narishige's MMN-9 is a miniature 3-axis coarse/fine micromanipulator with a magnetic stand that provides stability and freedom of installation. Incorporating standard MMN-330 features such as fine manipulation on the X-axis, rotation mechanism and pivot/tilting mechanism, this model also offers fine movement on the Z-axis for accurate adjustments of both height and tilting angle. The unit is mounted on a magnetic stand which provides solid, stable installation on any part of a steel plate.
*Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 enables remote controlled X axis fine movement.
Specification
| Accessories | H-1 Electrode Holder, Clamp Rod, Allen Wrench | | Movement range | Coarse | X40mm, Y20mm, Z35mm | | Fine | X7mm
Full rotation of knob 250um
Minimum graduation 10um | | Z15mm, Full rotation of knob 250um | With pivot and tilt mechanisms, With rotation mechanism,
With tilt mechanism, With height adjustment unit | | Dimensions/Weight | W240 x D90 x H270mm, 3.3kg |
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Three-Axis Triple Electrode Coarse/Fine Micromanipulator (with Rotation Mechanism)
| |
MMT-5:
$2,054.05
†
- Special Order
|
|
Narishige's MMT-5 is a three axis micromanipulator that is capable of placing three microelectrodes at adjacent positions. This model enables the attachment of three microelectrodes, in addition to standard MMN-33 features such as fine manipulation on the X-axis and rotation mechanism. The three microelectrodes are placed adjacent to each other so that they approach the specimen simultaneously. Special holders are provided to position the microelectrodes closer together than would be possible using conventional holders.
*Use GJ-8 magnetic stand or equivalent equipment to attach this model.
*Attachment to the side of microscope stage is possible by using P-1B height adjustment plate (sold separately) and a suitable mounting adaptor.
Specification
| Accessories | Dedicated Electrode Holders, Clamp Rod, Allen Wrench | | Movement range | Coarse | X40mm, Y20mm, Z35mm | | Fine | X7mm, Full rotation of knob 250um
Minimum graduation 10um | | With rotation mechanism | | Dimensions/Weight | W105 x D105 x H175mm, 1.2kg |
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Three-Axis Coarse/Fine Joystick-Type Micromanipulator
| |
MN-151:
$1,621.62
†
- In Stock
|
|
Narishige's MN-151 is a lightweight, 3-axis mechanical micromanipulator which has coarse movements in the X, Y, and Z directions. In addition to the 3 coarse axes of movement, the MN-151 also incorporates fine, joystick-controlled movements in the X-Y plane. A knob with 5 um gradations provides fine mechanical movement in the Z axis.
The MN-151 is very versatile, and can be mounted in a variety of orientations on both the left and right sides of a microscope stage. It can be used to manipulate the primary needle holder in applications such as Drosophila, C. elegans, Xenopus, and Zebrafish microinjection. It also can be used in other applications such as mammalian oocyte microinjection, where it can be used as a versatile holding-pipette manipulator and for Yeast Tetrad microdissection.
Specification
| Accessories included | B-8B Ball Joint, P-1A Height Adjustment Plate,
H-7 Pipette Holder | | Movement range | Coarse | X25mm, Y20mm, Z25mm | Fine movement: Z axis 8mm
Full rotation of fine knob 500um
Minimum graduation 5um | | Joystick control 1:150 - 1:15 (X-Y plane movement ratio) | | Dimensions/Weight | W95 x D90 x H110mm, 470g |
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Three-Axis Coarse/Fine Direct-Drive Micromanipulator
| |
MN-153:
$1,189.19
†
- Ships in 1-5 days
|
|
Narishige's MN-153 is a three axis coarse/fine direct drive micromanipulator with the capability of fine movement on the X-axis, enabling accurate linear approach to the cell with no danger of causing it any serious damage. Employment of the bar mount system provides complete installation flexibility and greatly broadens the range of possible applications.
*For attachment to the microscope, P-1A height adjustment plate and a suitable adaptor is required (standard accessories).
*The ball joint that attaches the micromanipulator can be replaced by MMO-220A single-axis oil hydraulic micromanipulator (sold separately).
Specification | Accessories included | B-8B Ball Joint, P-1A Height Adjustment Plate,
H-7 Pipette Holder | | Movement range | Coarse | X25mm, Y20mm, Z25mm | | Fine | X8mm
Full rotation of knob 500µm
Minimum graduation 5µm | | Dimensions/Weight | W121 x D36 x H145mm, 330g |
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Two-Axis Universal Micromanipulator (with Tilt and Pivot Mechanism)
| |
MP-1:
$3,243.24
†
- Special Order
|
|
Narishige's MP-1 is a two axis universal "Peteruch type" manipulator. This model features coarse and fine movement units for each of two dimensions (X- and Z-axis). Pivot and tilt functions are provided for very precise operations, and the pole for angle adjustment is the folded type for setting angles on the MP-1's main body.
*GJ-10 magnetic stand (sold separately) is attached to tilting stand
Specification
| Accessories | H-1 Electrode Holder, Special Screwdriver, Allen Wrench | | Movement range | Coarse | X60mm, Z50mm | | Fine | X4mm, Z4mm, Full rotation of knob 250um
Minimum graduation 10um | | With pivot and tilt mechanism | | Dimensions/Weight | W150 x D130 x H175mm, 3.7kg |
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Three-Axis Universal Micromanipulator incorporating a sub-stage for fine manipulations in the Y-axis (with Tilt and Pivot Mechanism)
| |
MP-2:
$3,729.73
†
- Ships in 1-5 days
|
|
Narishige's MP-2 model combines sub-stage M-1, which allows fine movement manipulations in the Y-axis, with the MP-1 micromanipulator, which is only for manipulation in the X- and Z-axes. This allows three-dimensional movement in addition to numerous other functions, which include an easy-to-use tilting stand and pivot/tilt mechanisms.
Different models for right- and left-handed users are available. Please specify right- or left-handed model when ordering.
Specification
| Accessories included | H-1 Electrode Holder
Special Screwdriver
Allen Wrench |
|---|
| Movement range | Coarse | X60mm, Z50mm |
|---|
| Fine | X4mm, Z4mm
Full rotation of knob: 250µm
Minimum graduation: 10µm |
|---|
Y40mm
Full rotation of knob: 500µm
Minimum graduation: 10µm | | | Pivot and tilt mechanism | | Dimensions/Weight | W150 × D130 × H210mm, 4.8kg |
|---|
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Three-Axis Coarse/Fine Micromanipulator ideal for patch clamping with solid body, stability and practicality.
| |
MX-1:
$3,891.89
†
- Special Order
|
|
Narishige's MX-1 is a manual micromanipulator specially designed to overcome problems of drift caused by temperature change, and to minimize the jitters invariably associated with manual operation. Coarse and fine movements can be performed for each axis and fine control with 1um minimum gradations is possible. Incorporation of a rotation mechanism makes it easy to attach and detach microelectrodes.
Different models for right- and left-handed users are available. Please specify right- or left-handed model when ordering.
*Separately sold tilting stand mountable.
Specification
| Accessories | H-1 Electrode Holder, Spanner, Allen Wrench,
Tension Adjustment Pin | | Movement range | Coarse | X35mm, Y30mm | | Fine | X4mm, Y4mm
Full rotation of knob 100um
Minimum graduation 1um | | Z coaxial handle | Coarse and fine 24mm
Full rotation of knob 18mm (coarse), 200um (fine) | | Dimensions/Weight | W210 x D160 x H210mm, 3.4kg |
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Three-Axis Coarse/Fine Micromanipulator with Tilting Stand for More Convenient Patch Clamping
| |
MX-2:
$4,270.27
†
- Ships in 1-5 days
|
|
Narishige's MX-2 is a three-axis coarse/fine micromanipulator comprised of the MX-1 and an attached TM-1 tilting stand, for easier and more convenient patch clamping. Its unique structure prevents hand jitters passing to the tip of the microelectrode, and obviates concerns about drifting caused by temperature fluctuations. The tilting stand offers outstanding stability and allows the manipulator to be set at any angle for easier approach to the specimen. Furthermore, it enables the manipulator to move horizontally as well as vertically in line with the microelectrode. The stand has a magnetic base, so (as long as an iron plate is used) installation is possible even when no screw holes are provided. A rotating mechanism is also included, making the exchange of microelectrodes easy.
Different models for right- and left-handed users are available. Please specify right- or left-handed model when ordering.
Specification
| Accessories included | H-1 Electrode Holder
Spanner
Allen Wrench
Tension Adjustment Pin |
|---|
| Movement range | Coarse | X35mm, Y30mm |
|---|
| Fine | X4mm, Y4mm
Full rotation of knob: 100µm
Minimum graduation: 1µm |
|---|
| Z-axis coaxial handle | Coarse/fine movement range: 24mm
Full rotation of coarse handle: 18mm
Full rotation of fine handle: 200µm |
|---|
| Dimensions/Weight | W210 × D180 × H265mm, 6.7kg |
|---|
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Three-Axis Coarse/Fine Micromanipulator for Installation on the Stage Side of a Microscope (with Tilting, Rotation Mechanism)
| |
MX-3:
$3,243.24
†
- Special Order
|
|
Narishige's MX-3 is a smaller MX model for installation on the stage side of a microscope. This model includes the MX's special patch clamping features, but in a more compact, space-saving version. A tilting board (included) is attached via an adaptor, allowing the whole body to be set at different angles and enabling easy approach to the microelectrode from the side of the microscope. A rotation mechanism is also included to facilitate attachment/detachment of microelectrodes.
Different models for right- and left-handed users are available. Please specify right- or left-handed model when ordering.
*For attachment to the microscope, a suitable adaptor is required (sold separately)
Specification
| Accessories | H-1 Electrode Holder, Spanner, Allen Wrench,
Tension Adjustment Pin | | Movement range | Coarse | X25mm, Y23mm | | Fine | X3mm, Y3mm,
Full rotation of knob 100um
Minimum graduation 1um | | Z coaxial handle | Coarse/Fine movement range 26mm
Full rotation of coarse knob 18mm
Full rotation of fine knob 200um | | Dimensions/Weight | W160 x D117 x H180mm, 1.9kg |
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Three-Axis Coarse/Fine Micromanipulator and Magnetic Base for Installation on the Stage Side of a Microscope (with Tilting, Rotation Mechanism)
| |
MX-4:
$3,513.51
†
- Ships in 1-5 days
|
|
Narishige's MX-4 model includes the MX's special patch clamping features, excellent stability, but in another more compact, space-saving version. The tilting stand has a magnetic base for unrestricted installation, and allows the whole body to be set at different angles in order to facilitate approaching your target with microelectrodes. A rotation mechanism is also included for easy attachment/detachment of microelectrodes.
Different models for right- and left-handed users are available. Please specify right- or left-handed model when ordering.
Specification
| Accessories included | H-1 Electrode Holder
Spanner
Allen Wrench
Tension Adjustment Pin |
|---|
| Movement range | Coarse | X25mm, Y23mm |
|---|
| Fine | X3mm, Y3mm
Full rotation of knob: 100µm
Minimum graduation: 1µm |
|---|
| Z-axis coaxial handle | Coarse/fine movement range: 26mm
Full rotation of coarse handle: 18mm
Full rotation of fine handle: 200µm |
|---|
| Dimensions/Weight | W143 × D106 × H265mm, 2.85kg |
|---|
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Three-Axis Coarse/Fine Manual Micromanipulator
| |
NMN-21:
$3,891.89
†
- Ships in 1-5 days
|
|
Narishige's NMN-21 is a manually operated micromanipulator which minimizes jitter for simplicity and high performance.
Drift and electromagnetic disturbance are critical problems in patch clamping work. This mechanical micromanipulator was developed specifically for patch clamping: it does not employ a liquid hydraulic system (which is prone to drift caused by temperature changes), has no springs (a common cause of mechanical drift), nor a motor (which can be a source of electrical noise). Its body is designed to absorb vibrations, so that even at high magnifications, problems of jittering are virtually non-existant. The NMN-21 is based on a drum type design and utilizes pairs of sliders for each axis that serve to isolate vibrations caused then a user touches the control knobs from the movement of the device. High mass and a low center of gravity provide exceptionally steady and stable performance. The overall design is compact, so installation requires a minimum of space. With coarse and fine manipulators integrated into the compact body, this model handles a full range of required motions, from moving a microelectrode into the microscope field of view to making delicate contact with cells.
* Can be mounted directly on an optical bench-type isolation table
* Can be firmly fixed to any part of a steel isolation table with the NMN-C magnetic stand (sold separately)
* Can be mounted directly to microscopes via suitable adapters (sold separately)
* AP-14/AP-13-3 patch clamp headstage holders can be attached via the integrated UST-2 solid universal joint
 Specification | Accessories included | UST-2 Solid Universal Joint, Fixing Plate,
H-1 Electrode Holder, Allen Wrench | | Movement range | Coarse | X15mm, Y15mm, Z15mm
Full rotation of knob: approx. 4mm | | Fine | X6mm, Y6mm, Z6mm
Full rotation of knob: 250um
Minimum graduation: 1um | | Dimensions/Weight | W110 x D170 x H105mm, 930g |
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Thin 3-Axis Coarse/Fine Mechanical Micromanipulator
(for multi-channel recording)
| |
NMN-25:
$3,891.89
†
- Ships in 1-5 days
|
|
Narishige's NMN-25 packs similar features to those of the NMN-21 into a thinner drive unit to facilitate multi-channel recording. The placement of all three axes' control knobs in one plane instead of three, and the adoption of a simpler holder fixing block, enables several manipulators to be installed and operated close together without interfering with each other. Installation on an isolation table makes use of multiple manipulators straightforward. Like the NMN-21, which was developed specially for patch clamping, this mechanical manipulator integrates coarse and fine movements, and employs a body design which absorbs vibrations. As a result, operation is precise, stable, and free from concerns about drift and electromagnetic disturbance.
*For attachment directly to a microscope, a suitable adaptor is required (sold separately).
*The micromanipulator can be mounted directly on the isolation table.
*AP-13-3/AP-14 patch clamp headstage holders can be attached to this unit (sold separately).
Specification
| Accessories included | Dedicated Universal Joint, Fixing Plate,
H-12 Electrode Holder, Allen Wrench | | Movement range | Coarse | X15mm, Y15mm, Z15mm
Full rotation of knob: approx. 4mm | | Fine | X6mm, Y6mm (total Y Course+Fine travel 15mm), Z6mm
Full rotation of knob: 250µm
| | Dimensions/Weight | W155 X D60 X H100mm, 600g |
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
|
Oil Hydraulic Micromanipulators |
Single-Axis Oil Hydraulic Fine Micromanipulator and Three-axis Coarse Micromanipulator
| |
MO-150:
$3,513.51
†
- Special Order
|
|
Narishige's MO-150 is an oil hydraulic single-axis fine micromanipulator capable of approaching the specimen without vibration. Based on the M-152, this version adds the capability of oil hydraulic fine movement on the X-axis, enabling accurate, vibration-free linear approach to the cell with no danger of causing it any serious damage. Employment of the bar mount system provides complete installation flexibility and greatly broadens the range of possible applications.
*For attachment to the microscope, P-1A height adjustment plate (sold separately) and a suitable adaptor is required (standard accessories).
*Attached universal joint can be replaced by the MMO-220A single-axis oil hydraulic micromanipulator (sold separately).
Specification
| Accessories | B-8B Ball Joint, H-7 pipette Holder,
P-1A Height Adjustment Plate | | Movement range | Coarse | X25mm, Y20mm, Z25mm | | Fine | X10mm, Full rotation of knob 500um
Minimum graduation 2um | | Dimensions/Weight | Control unit | W70 x D115 x H100mm, 1.15kg | | Driving unit | W94 x D36 x H155mm, 280g |
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
|
Water Hydraulic Micromanipulators |
Three-Axis Coarse Mechanical Micromanipulator with Fine Water Hydraulic Z-Axis Control. Ideal for experiments under low magnification
| |
MWS-31:
$5,135.14
†
- Ships in 1-5 days
|
|
Narishige's MWS-31 is a one-axis water hydraulic micromanipulator combined with a three-dimensional manual coarse manipulator for patch clamping applications under low magnifications, such as when using a stereo microscope. Even at low magnifications, vibration is a critical problem, so a large and rigid manual manipulator is used to prevent it. The rotation mechanism makes exchanging pipettes easier, and the water hydraulic 1:5 cartridge system enables more stable and precise operation. An angle adjustment mechanism is equipped on the fine movement section so that an angle can be added for the fine movement section only, while coarse section retains its vertical position. This allows the manipulator angle to be changed between horizontal and vertical while the manipulator itself remains firmly fixed in position.
Specification
| Accessories included | H-1 Electrode Holder
Clamp Rod
Allen Wrench |
|---|
| Movement range | Coarse | X38mm, Y25mm, Z30mm
With tension adjustment mechanism |
|---|
| Fine | 2mm
Full rotation of knob 50µm
Minimum graduation 0.2µm |
|---|
| Dimensions/Weight | Control unit | W70 × D115 × H100mm, 1.15kg |
|---|
| Drive unit | W190 × D145 × H200mm, 1.15kg |
|---|
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
Independently usable one-axis water hydraulic micromanipulator for stereomicroscopes (Magnetic Mount)
| |
MWS-32:
$5,459.46
†
- Ships in 1-5 days
|
|
Narishige's MWS-32 combines a magnetic stand with the MWS-31, so that it can be used independently. Direct attachment to the magnetic stand provides enhanced stability required for applications with stereo microscopes. Like MWS-31, MWS-32 also has a water hydraulic 1:5 cartridge system, angle adjustment mechanism for firm fixing, and a rigid manual coarse manipulator. A unique feature of MWS-32 is that the manipulator is fixed directly to a rigid magnetic stand, thereby making the vertical adjustments more stable. This integration of the magnetic stand allows independent use in a variety of applications by freeing the manipulator from a stereomicroscope.
Specification
| Accessories included | H-1 Electrode Holder
Allen Wrench |
|---|
| Movement range | Coarse | X38mm, Y25mm, Z30mm
With tension adjustment mechanism |
|---|
| Fine | 2mm
Full rotation of knob 50µm
Minimum graduation 0.2µm |
|---|
| Dimensions/Weight | Control unit | W70 × D115 × H100mm, 1.15kg |
|---|
| Drive unit | W200 × D100 × H240mm, 2.45kg |
|---|
|
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
|
|
|
|
|
|
|
