†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Direct-Drive Micromanipulators
Ball joint w/ adjustable clamp C-1
BC-3:
$778.38
†
- Special Order To Be Discontinued
The compact, adjustable clamp C-1 comes mounted on a ball joint, and can be used for various assisting purposes. The ball joint mounting enhances ease of use by allowing one to change the angle relative to the mounting bar.
*Mounting bar sold separately.
*Use GJ-1 magnetic stand or equivalent equipment to attach this model.
When ordering, please indicate if the unit will be mounted on the right or left side as there are two different versions of the BC-3 clamp... or get one of each!
Specifications
Accessories included
XY Control Knob, Allen Wrench
Movement range:
Coarse
Z19mm
Fine
X15mm, Y6mm
Dimensions/Weight
W80 x D46 x H96mm, 250g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Ball joint w/ adjustable clamp C-2
BC-4:
$870.27
†
- Group II Special Order
The compact, adjustable clamp C-2 comes mounted on a ball joint, and can be used for various assisting purposes. The ball joint mounting enhances ease of use by allowing one to change the angle relative to the mounting bar.
*Mounting bar sold separately.
*Use GJ-1 magnetic stand or equivalent equipment to attach this model.
When ordering, please indicate if the unit will be mounted on the right or left side as there are two different versions of the BC-4 clamp... or get one of each!
BC-4L
BC-4R
Specifications
Accessories included
XY Control Knob, Allen Wrench
Movement range:
Coarse
Z24mm
Fine
X15mm, Y6mm
Dimensions/Weight
W80 x D46 x H96mm, 300g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Micromanipulator with built-in Ball Joint
BE-8:
$940.54
†
- Ships in 1-5 days
Narishige's BE-8 single-axis coarse manipulator is an nice add-on for stereotaxic instruments. Despite its compact, lightweight design, it has a long 40mm range of travel and comes mounted on a ball joint so that its angle can be set freely. The BE-8 is attached, via its set screw, to any 10mm O.D. bar, so it is suitable for installation with a wide variety of stands.
Specifications
Movement range (course)
X40mm
Dimensions/Weight
W140 x D25 x H95mm, 210g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Adjustable Clamp (R/L)
C-1:
$772.97
†
- Group II Special Order
Narsishige's C-1 clamp is an economical alternative to a micromanipulator. It is very compact and equipped with a three-dimensional position adjustment. It can be attached using a 6mm bar.
Specifications
Accessories included
X-Y Control Knob ø6 × 120mm Threaded Bar Allen Wrench
Movement range
Coarse
Z19mm
Fine
X15mm, Y6mm
Dimensions/Weight
W65 × D47 × H65mm, 130g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Adjustable Clamp (R/L)
C-2:
$778.38
†
- Group II Special Order
Narsishige's C-2 clamp is an economical alternative to a micromanipulator. It is very compact and equipped with a three-dimensional position adjustment. It can be attached using a 6mm bar.
Specifications
Accessories included
X-Y Control Knob ø6 × 120mm Threaded Bar Allen Wrench
Movement range
Coarse
Z24mm
Fine
X15mm, Y6mm
Dimensions/Weight
W65 × D47 × H73mm, 190g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Single-Axis Coarse Micromanipulator
M-10:
$356.76
†
- Special Order
Narishige's M-10 is a compact one-dimensional coarse manipulator designed for use on the microscope stage. Attachment is done by using a 4mm bar. The model can be used in combination with many kinds of stands.
Specification
Accessories
H-7C Pipette Holder, Allen Wrench
Movement range
Coarse
22mm
Dimensions/Weight
W57 x D15 x H30mm, 50g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Single-Axis Fine Micromanipulator
M-10F:
$416.22
†
- Discontinued
Narishige's M-10F is a compact one-dimensional fine micromanipulator designed for use on the microscope stage. Attachment is done by using a 4mm bar. The model can be used in combination with many kinds of stands.
Specification
Accessories
H-7C Pipette Holder, Allen Wrench
Movement range
Fine
22mm, Full rotation of knob 500um
Dimensions/Weight
W57 x D15 x H30mm, 50g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Direct-Drive Coarse Micromanipulator
M-152:
$1,113.51
†
- Ships in 1-5 days
Narishige's M-152 is a three-dimensional coarse manual manipulator with simple design. This compact, lightweight model offers coarse manipulation only and is very simple to use. A bar mount is provided to enable installation by either a mounting adaptor or magnetic stand.
When used in conjunction with a micromanipulator such as the MMO-220C, quick three-dimensional operation is possible in low magnification experiments using a stereo microscope.
*For attachment to the microscope, P-1A height adjustment plate (not included) and a suitable adaptor is required (standard accessories).
*The ball joint that attaches the micromanipulator can be replaced by MMO-220C single-axis oil hydraulic micromanipulator (sold separately). *A needle holder, such as our MINJ-4, Narishige's HI-7, H-7 or HI-9, also needs to be purchased separately.
Specification
Accessories included
B-8B Ball Joint
Movement range
Coarse
X25mm, Y20mm, Z25mm
Dimensions/Weight
W95 x D90 x H110mm, 320g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Compact Coarse Micromanipulator
M-2:
$1,129.73
†
- Discontinued
Narishige's M-2 is a simple manipulator offering only three-dimensional coarse movement. The clean, simple design retains a very rigid yet lightweight structure. It is available in both Right-side and Left-side versions to make the knobs conveniently accessible.
*Use GJ-8 magnetic stand or equivalent equipment to attach this model.
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Compact Three-Axis Coarse Micromanipulator
M-3:
$940.54
†
- Special Order - Pricing Available Upon Request
Narishige's M-3 is a simple manipulator offering only three-dimensional coarse movement. Designed for simplicity and ease of use, this model has scales on the X- and Y-axes for reading positions, and can use 7 -14mm holders.
*Use GJ-8 magnetic stand or equivalent equipment to attach this model.
Specification
Accessories
H-1 Electrode Holder, Clamp Rod, Allen Wrench
Movement range
Coarse
X40mm, Y30mm, Z30mm
Dimensions/Weight
W130 x D130 x H80mm, 400g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Thin Three-Axis Coarse/Fine Micromanipulator
M-3333:
$1,470.27
†
- Ships in 1-5 days
Narishige's M-3333 is a thin three-axis coarse/fine micromanipulator. To enable recording from multiple microelectrodes, the body of this model is made as thin as possible, with all the handles positioned in a single direction. Use of the X-Rotating X-Blocks (sold separately), makes it possible to place many microelectrodes close together without taking up too much space.It is of course possible to mount a single-axis fine movement unit on the X-axis for a more careful approach to the specimen.
*Use X-4 X-blocks and GJ-8 magnetic stand or equivalent equipment to attach this model.
*Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 enables remote controlled X-axis fine movement.
Specification
Accessories included
H-1 Electrode Holder, Allen Wrench
Movement range
Coarse
X40mm, Y12mm, Z30mm
Fine
X7mm, Full rotation of knob: 250um Minimum graduation: 10um
Dimensions/Weight
W126 x D43 x H145mm, 340g
FAQ's
Q: What are the dimensions of the mounting bar on the M-3333? Is there a magnetic stand that can hold it effectively?
A: The mounting bar on the M-3333 is 12mm in diameter and about 25mm long. We offer magnetic stands that can accommodate a 12mm mounting bar, including the GJ-8.
However, it is generally inconvenient to directly mount the M-3333 directly to the GJ-8's upper cross-clamp, and restrict how you position the manipulator since it would be sitting directly over the magnetic base instead of out and away from it.
To remedy this issue we recommend the X-4 rotating X-block in conjunction with either the GJ-1 or preferably the GJ-8, which provides additional weight and stability.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Narishige's M-40 is the ultra compact three axis coarse micromanipulater designed for use on the microscope stage. With its simple mechanism (coarse movement only), and handles on a single line, this model takes up very little space even on the stage.
Although the design is compact, a strong magnetic stand is incorporated, making it possible to fix the unit firmly in any chosen location.
Specification
Accessories
H-7C pipette holder, Allen Wrench
Movement range
Coarse
X22mm, Y20mm, Z22mm
Dimensions/Weight
W 100 x D 55 x H 85mm, 550g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Narishige's M-40B is a compact three-dimensional coarse manipulator designed for use on the microscope stage. With its simple mechanism (coarse movement only), and handles on a single line, this model takes up very little space even on the stage. This model is attached using the bar. The user can freely select the bar from a variety of kinds, which makes it possible to set the approach angles easily.
*Use GJ-1 magnetic stand or equivalent equipment to attach this model.
Specification
Accessories
H-7C Pipette Holder, Allen Wrench
Movement range
Coarse
X30mm, Y23mm, Z22mm
Dimensions/Weight
W80 x D30 x H105mm, 230g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Micromanipulator with Tilt and Pivot Mechanism
M-44:
$654.05
†
- Special Order
Narishige's M-44 is a compact size micromanipulator featuring quasi three-dimensional operation by attaching a pivot and tilt mechanism. This compact three-dimensional coarse manipulator is for use on the microscope stage, and reflects the design team's determination to minimize the unit's size. A pivot/tilt mechanism is employed on the single-axis coarse manipulator, enabling quasi three-dimensional drive. Attachment is done by using a 4mm bar. The model can be used in combination with many kinds of stands.
Specification
Accessories
H-7C Pipette Holder, Allen Wrench
Movement range
Coarse
22mm
With pivot movement for the Y axis adjustment With tilt movement for Z axis adjustment
Dimensions/Weight
W65 x D25 x H50mm, 70g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Movable X-Block
M-5:
$297.30
†
- Special Order
Narishige's M-5 X-block, along with the M-6, X-1, and X-2 allow two bars to be combined. Vertical adjustment is possible through the Z-axis drive. Users should select the required block according to the rotation mechanism employed in the holding section of the horizontal bar, and the diameter of the bar itself (10mm or 12mm).
Click the links below to see similar X-blocks: M-6 X-1 X-2
Specification
Model
M-5
M-6
X-1
X-2
Movement range
Coarse
Z45mm
Z80mm
Z25mm
Z35mm
Dimensions/Weight
W60 x D46 x H55mm, 220g
W100 x D52 x H74mm, 500g
W70 x D50 x H50mm, 200g
W80 x D55 x H65mm, 300g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Movable X-Block
M-6:
$416.22
†
- Special Order
Narishige's M-6 X-block along with the M-5, X-1, and X-2 allow two bars to be combined. Vertical adjustment is possible through the Z-axis drive. Users should select the required block according to the rotation mechanism employed in the holding section of the horizontal bar, and the diameter of the bar itself (10mm or 12mm).
Click the links below to see similar X-blocks: M-5 X-1 X-2
Specification
Model
M-5
M-6
X-1
X-2
Movement range
Coarse
Z45mm
Z80mm
Z25mm
Z35mm
Dimensions/Weight
W60 x D46 x H55mm, 220g
W100 x D52 x H74mm, 500g
W70 x D50 x H50mm, 200g
W80 x D55 x H65mm, 300g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Magnet-Mount Three-Axis Coarse Micromanipulator (with Magnetic Base)
MB-PP2:
$940.54
†
- Special Order
Narishige's MB-PP2 is a three axis coarse micromanipulator equipped with a magnetic base. It can be fixed to an iron plate attached to a microscope. A built-in rotating mechanism makes microelectrode replacement extra easy and quick.
Specification
Accessories
H-1 Electrode Holder, Allen Wrench
Movement range
Coarse
X30mm, Y24mm, Z18mm
Dimensions/Weight
W65 x D70 x H110mm, 750g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Coarse/Fine Joystick-Type Micromanipulator with Tilting Apparatus (Magnetic Mount)
MJ-2:
$4,594.59
†
- Discontinued
Narishige's MJ-2 is a three-axis coarse/fine micromanipulator freely fixed with a magnetic stand, with joystick control for better operability. Thanks to incorporation of a joystick, micro tools can be freely controlled on both X and Y planes. Rotating the lever changes the moving ratio, so adjustment is easy.
Three-dimensional movement is possible, with coarse movement provided on the X and Y axes, and coaxial coarse and fine movement on the Z axis. The MJ-2 is firmly and freely attached by using the magnetic stand, and the approach angles can be set via the tilting plate.
Full rotation of coarse knob 18mm Full rotation of fine knob 200um
Dimensions/Weight
W160 x D115 x H220mm, 2.9kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Coarse/Fine Micromanipulator with Rotation Mechanism (Tilting Base)
- Special Order - Pricing Available Upon Request
Narishige's MLN-2 is a three axis coarse/fine micromanipulator with a tilting stand attachment for improved stability. In addition to main features such as a fine movement unit operating in the same direction as the microelectrode, a rotation mechanism and pivot/tilt capabilities, the MLN-330 is mounted on a tilting stand. This gives better stability than simple bar attachment. The fine movement unit is mounted on the Z-axis and enables fine adjustment of height. The tilting stand features a foldaway angle adjustment pole, so as not to interfere with operation.
*Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 enables remote controlled X axis fine movement.
Specification
Accessories
H-1 Electrode Holder, Dedicated electrode holder, Allen Wrench, Mounting Screw, Flat Washer, Clamp Rod
Movement range
Coarse
X38mm, Y25mm, Z30mm With tension adjustment mechanism
Fine
X35mm, Full rotation of knob 250um Minimum graduation 10um
With rotation mechanism, With pivot and tilt mechanism With tilting stand, With height adjustment unit
Dimension
Main body
W110 x D90 x H170mm
Tilting stand
W130 x D150 x H45mm
Weight
4.2kg (includes tilting stand)
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Coarse Micromanipulator
- Special Order - Pricing Available Upon Request
Narishige's MLN-3 is a simple large three-dimensional coarse manipulator with good stability, offering all the features of the ML-3 except the fine movement unit. Handles on the X and Z axes are placed on both sides for the benefit of both left- and right-handed users, and the handles offer hardness adjustment to prevent them dropping under their own weight , which can cause drifting.
*Use GJ-2 magnetic stand or equivalent equipment to attach this model. *Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 remote controlled X axis fine movement. *For details of using the Type A microscope mounting adapter, please contact us.
Specification
Accessories
H-1 Electrode Holder, Dedicated electrode holder Clamp Rod, Allen Wrench
Movement range
Coarse
X38mm, Y25mm, Z30mm With tension adjustment mechanism
Dimensions/Weight
W85 x D90 x H170mm, 850g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
MLN-33:
$3,243.24
†
- Special Order - Pricing Available Upon Request
Narishige's MLN-33 is a three axis coarse/fine micromanipulator equipped with rotation mechanism for easy microelectrode exchange. Like the rigid-design ML-3, this model incorporates a single axis fine movement unit which moves in the same direction as the microelectrode and enables a carefully controlled approach to the specimen. A rotation mechanism is also included, making the exchange of microelectrodes easy. Handles on the X and Z axes are placed on both sides for the benefit of both left- and right-handed users, and the handles offer hardness adjustment to prevent them dropping under their own weight.
*Use GJ-2 magnetic stand or equivalent equipment to attach this model. *Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 remote controlled X axis fine movement. *Attachment to the side of microscope stage is possible by using P-1C height adjustment plate (sold separately) and a suitable mounting adaptor.
Specification
Accessories
H-1 Electrode Holder, Dedicated electrode holder, Clamp Rod, Allen Wrench
Movement range
Coarse
X38mm, Y25mm, Z30mm With tension adjustment mechanism
Fine
X35mm, Full rotation of knob 250um Minimum graduation 10um
With rotation mechanism
Dimensions/Weight
W110 x D90 x H200mm, 1.4kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Coarse/Fine Micromanipulator (with Tilt and Pivot Mechanism)
- Special Order - Pricing Available Upon Request
Narishige's MLN-330 is a high-class micromanipulator with both rotation and pivot/tilt mechanisms. This model features a single-axis fine movement unit which operates in the same direction as the microelectrode and allows careful approach to the specimen.
Handles on the X and Z axes are provided on both side, for the convenience of both left- and right-handed users. The handles also have hardness adjustment to prevent dropping under their own weight. In addition, a rotation mechanism is equipped for easy exchange of microelectrodes, along with pivot and tilting mechanisms to allow precise positioning.
*Use GJ-2 magnetic stand or equivalent equipment to attach this model.
*Attachment to the side of microscope stage is possible by using P-1C height adjustment plate (sold separately) and a suitable mounting adaptor.
*Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 enables remote controlled X axis fine movement.
Specification
Accessories
H-1 Electrode Holder, Dedicated electrode holder Clamp Rod, Allen Wrench
Movement range
Coarse
X38mm, Y25mm, Z30mm With tension adjustment mechanism
Fine
X35mm, Full rotation of knob 250um Minimum graduation 10um
With rotation mechanism, With pivot and tilt mechanism
Dimensions/Weight
W110 x D90 x H195mm, 1.5kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Narishige's MLN-3R is a a three axis coarse micromanipulator with a rotation mechanism for easy microelectrode exchange. This model is the MLN-3 three-dimensional coarse manipulator with a rotation mechanism added to facilitate the exchange of microelectrodes. Handles on the X and Z axes are placed on both sides for the benefit of both left- and right-handed users, and the handles offer hardness adjustment to prevent them dropping under their own weight.
*Use GJ-2 magnetic stand or equivalent equipment to attach this model.
*Attachment to the side of microscope stage is possible by using P-1C height adjustment plate (sold separately) and a suitable mounting adaptor.
*Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 remote controlled X axis fine movement.
Specification
Accessories
H-1 Electrode Hoder, Dedicated electrode holder, Clamp Rod, Allen Wrench
Movement
Coarse
X38mm, Y25mm, Z30mm With tension adjustment mechanism
With rotation mechanism
Dimensions/Weight
W85 x D90 x H195mm, 900g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Coarse/Fine Compact Micromanipulator
MM-3:
$1,470.27
†
- In Stock
Narishige's MM-3 is amongst the most popular three axis coarse/fine compact micromanipulator. Its smooth drive and stable controls have made the MM-3 a classic and popular micromanipulator for decades. Single-axis fine movement in the same direction as the microelectrode or needle provides a high level of control when approaching a specimen. The three-axes of coarse movement operate via strudy rack & pinion mechanisms, enabling the microelectrode or needle to be placed near the specimen quickly.
Handles on both sides of the X- and Z-axis make this equipment suitable for both left- and right-handed operators, and a tension adjustment is also available to prevent the unit from dropping under its own weight. If used properly, this model's smoothness and stability will remain unchanged even over several decades of use.
*The MM-3 mounts via an extra-heavy-duty 12mm mounting rod (not included). For mounting next to the microscope or target, use the GJ-8 heavy-duty magnetic stand or equivalent equipment. Contact us for other options if mounting directly to a microscope stage is required for maximum stability.
*It is possible to substitute a hydraulic micromanipulator, such as the MO-10, for the standard H-13 micropipette holder when remote control of X-axis is required.
Specification
Accessories included
H-13 Electrode Holder, Clamp Rod, Allen Wrench
Movement range
Coarse
X40mm, Y20mm, Z35mm
Fine
X7mm, Full rotation of knob 250um, Minimum graduation 10um
Dimensions/Weight
W105 x D70 x H145mm, 790g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Coarse/Fine Micromanipulator with Dual Electrode Holder and Rotation Mechanism
MMD-4:
$2,021.62
†
- Special Order
Narishige's MMD-4 is a three-axis coarse/fine micromanipulator with a dual electrode holder that enables the attachment of two microelectrodes, in addition to standard MMN-33 features such as fine manipulation on the X-axis and rotation mechanism. The two microelectrodes are placed side by side so that they approach the specimen simultaneously. Special holders are provided to position the microelectrodes closer together than would be possible using conventional holders.
*Use GJ-8 magnetic stand or equivalent equipment to attach this model.
*Attachment to the side of microscope stage is possible by using P-1B height adjustment plate (sold separately) and a suitable mounting adaptor.
X7mm, Full rotation of knob 250um Minimum graduation 10um
With rotaion mechanism
Dimensions/Weight
W105 x D85 x H175mm, 1kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Coarse Positioning Micromanipulator
MMN-1:
$1,427.03
†
- Ships in 1-5 days
Narishige's MMN-1 is a 3-axis, direct-drive coarse micromanipulator, which is commonly used in conjunction with remote-controlled hydraulic micromanipulators.
Its purpose is to rapidly position the micropipette prior to fine micromanipulation. It is specifically designed to mount onto the illumination pillar of any inverted microscope with the use of a variety of microscope adapters.
Specification
Accessory included
Allen Wrench
Movement range
Coarse
X30mm, Y30mm, Z30mm
Dimensions/Weight
W95 x D90 x H110mm, 0.47kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Narishige's MMN-2 is a three axis coarse/fine micromanipulator with improved stability through attachment on a tilting stand. Along with such standard MMN-330 features as fine manipulation on the X-axis, rotation mechanism and pivot/tilting mechanism, the MMN-2 includes fine movement on the Z-axis for accurate vertical adjustments. In addition, it is mounted on a tilting stand, which offers more stability than conventional bar attachment. The pole for angle adjustment on the stand folds away, so as not to interfere with operation.
*Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 enables remote controlled X axis fine movement.
Specification
Accessories
H-1 Electrode Holder, Allen Wrench
Movement range
Coarse
X40mm, Y20mm, Z35mm
Fine
X7mm, Full rotation of knob 250um Minimum graduation 10um
Z15mm, Full rotation of knob 250um
With height adjustment unit, With fine pivot and tilt mechanism, With rotation mechanism
Dimensions/Weight
W195 x D130 x H240mm, 3.4kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Miniature Three-Axis Coarse Micromanipulator
MMN-3:
$1,189.19
†
- Special Order
Narishige's MMN-3 is an economical three-dimensional coarse manipulator. X-and Z-axis handles are placed on both sides, for use by both left- and right-handed operators. The handles also feature hardness adjustment to prevent them from dropping under their own weight and thus causing drift.
*Use GJ-8 magnetic stand or equivalent equipment to attach this model. *Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 enables remote controlled X axis fine movement. *For details of using the Type A microscope mounting adaptor, please contact us.
Specification
Accessories
H-1 Electrode Holder, Clamp Rod, Allen Wrench
Movement range
Coarse
X40mm, Y20mm, Z35mm
Dimensions/Weight
W105 x D70 x H135mm, 700g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Narishige's MMN-33 is a miniature coarse micromanipulator that features single-axis fine movement in the same direction as the microelectrode, just as the MM-3. This feature facilitates careful approach to the specimen. Handles on the X and Z axes are placed on both sides for use by both left- and right-handed operators, and the handles feature hardness adjustment to prevent them from dropping under their own weight. In addition, a rotation mechanism is mounted for easy exchange of microelectrodes.
*Use GJ-8 magnetic stand or equivalent equipment to attach this model. *Attachment to the side of microscope stage is possible by using P-1B height adjustment plate (sold separately) and a suitable mounting adaptor. *Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 enables remote controlled X axis fine movement.
Specification
Accessories
H-1 Electrode Holder, Clamp Rod, Allen Wrench
Movement range
Coarse
X40mm, Y20mm, Z35mm
Fine
X7mm, Full rotation of knob 250um, Minimum graduation 10um
With rotation mechanism
Dimensions/Weight
W105 x D70 x H155mm, 880g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Narishige's MMN-330 is a miniature 3-axis coarse/fine micromanipulator with pivot and tilt mechanisms for accurate position adjustment. Like the MM-3, single-axis fine movement is equipped on this manipulator in the same direction as the microelectrode, helping to ensure a careful approach to the specimen. X-and Z-axis handles are placed on both sides, for both left- and right-handed users, and feature hardness adjustment to prevent them dropping under their own weight. Pivot and tilt mechanisms are also incorporated to enable very precise positioning adjustment.
*Use GJ-8 magnetic stand or equivalent equipment to attach this model. *Attachment to the side of microscope stage is possible by using P-1B height adjustment plate (sold separately) and a suitable mounting adaptor. *Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 enables remote controlled X axis fine movement.
Specification
Accessories
H-1 Electrode Holder, Clamp Rod, Allen Wrench
Movement range
Coarse
X40mm, Y20mm, Z35mm
Fine
X7mm, Full rotation of knob 250um Minimum graduation 10um
Wish pivot and tilt mechanism, With rotation mechanism
Dimensions/Weight
W110 x D70 x H160mm, 1.1kg
*Products categorized as Group-2 are those used in specialized applications. Because of the limited production of a wide variety of products, Group-2 products require longer lead times than Group-1 products, and they are non-returnable.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Narishige's MMN-333 is a miniature 3-axis coarse/fine micromanipulator with pivot and tilt mechanisms for accurate position adjustment.
Like the MM-3, single-axis fine movment is equipped on this manipulator in the same direction as the microelectrode, helping to ensure a careful approach to the specimen. X- and Z-axis handles are placed on both sides, for both left- and right-handed users, and feature hardness adjustment to prevent them from dropping under their own weight. Pivot and tilt mechanisms are also incorporated to enable very precise positioning adjustment.
*Use GJ-8 magnetic stand or equivalent equipment to attach this model. *Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 enables remote controlled X axis fine movement. *For details of using the Type A microscope mounting adaptor, please contact us.
Specification
Accessories
H-1 Electrode Holder, Clamp Rod, Allen Wrench
Movement range
Coarse
X40mm, Y20mm, Z35mm
Fine
X7mm, Full rotation of knob 250um Minimum graduation 10um
With pivot and tilt mechanism
Dimensions/Weight
W110 x D70 x H150mm, 900g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Narishige's MMN-3R is a miniature 3-axis coarse micromanipulator with a rotation mechanism for easy microelectrode exchange. Based on the three-dimensional only MMN-3 coarse manipulator, this model adds a rotation mechanism which makes it easy to exchange microelectrodes. X- and Z-axis handles are placed on both sides, for use by both left- and right-handed operators. The handles also feature hardness adjustment to prevent them from dropping under their own weight and thus causing drift.
*Use GJ-8 magnetic stand or equivalent equipment to attach this model. *Attachment to the side of microscope stage is possible by using P-1B height adjustment plate (sold separately) and a suitable mounting adaptor. *Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 enables remote controlled X axis fine movement.
Specification
Accessories
H-1 Electrode Holder, Clamp Rod, Allen Wrench
Movement range
X40mm, Y20mm, Z35mm With tension adjustment mechanism
With rotation mechanism
Dimensions/Weight
W105 x D70 x H145mm, 790g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Narishige's MMN-8 is a miniature 3-axis coarse/fine micromanipulator with a stable, space-efficient heavy weight stand. Incorporating standard MMN-330 features such as fine manipulation on the X-axis, rotation mechanism and pivot/tilting mechanism, this model also offers fine movement on the Z-axis for accurate adjustments of both height and tilting angle. Excellent stability and space efficiency are provided by mounting on a heavy weight stand.
*Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 enables remote controlled X axis fine movement.
Specification
Accessories
H-1 Electrode Holder, Clamp Rod, Allen Wrench
Movement range
Coarse
X40mm, Y20mm, Z35mm
Fine
X7mm, Full rotation of knob 250um Minimum graduation 10um
Z15mm, Full rotation of knob 250um
With pivot and tilt mechanism, With rotaion mechanism, With vertical adjustment unit
Dimensions/Weight
W180 x D150 x H220mm, 3.4kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Narishige's MMN-9 is a miniature 3-axis coarse/fine micromanipulator with a magnetic stand that provides stability and freedom of installation. Incorporating standard MMN-330 features such as fine manipulation on the X-axis, rotation mechanism and pivot/tilting mechanism, this model also offers fine movement on the Z-axis for accurate adjustments of both height and tilting angle. The unit is mounted on a magnetic stand which provides solid, stable installation on any part of a steel plate.
*Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 enables remote controlled X axis fine movement.
Specification
Accessories
H-1 Electrode Holder, Clamp Rod, Allen Wrench
Movement range
Coarse
X40mm, Y20mm, Z35mm
Fine
X7mm Full rotation of knob 250um Minimum graduation 10um
Z15mm, Full rotation of knob 250um
With pivot and tilt mechanisms, With rotation mechanism, With tilt mechanism, With height adjustment unit
Dimensions/Weight
W240 x D90 x H270mm, 3.3kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Narishige's MMT-5 is a three axis micromanipulator that is capable of placing three microelectrodes at adjacent positions. This model enables the attachment of three microelectrodes, in addition to standard MMN-33 features such as fine manipulation on the X-axis and rotation mechanism. The three microelectrodes are placed adjacent to each other so that they approach the specimen simultaneously. Special holders are provided to position the microelectrodes closer together than would be possible using conventional holders.
*Use GJ-8 magnetic stand or equivalent equipment to attach this model. *Attachment to the side of microscope stage is possible by using P-1B height adjustment plate (sold separately) and a suitable mounting adaptor.
Specification
Accessories
Dedicated Electrode Holders, Clamp Rod, Allen Wrench
Movement range
Coarse
X40mm, Y20mm, Z35mm
Fine
X7mm, Full rotation of knob 250um Minimum graduation 10um
With rotation mechanism
Dimensions/Weight
W105 x D105 x H175mm, 1.2kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Narishige's MN-151 is a lightweight, 3-axis mechanical micromanipulator which has coarse movements in the X, Y, and Z directions. In addition to the 3 coarse axes of movement, the MN-151 also incorporates fine, joystick-controlled movements in the X-Y plane. A knob with 5 um gradations provides fine mechanical movement in the Z axis. The MN-151 is very versatile, and can be mounted in a variety of orientations on both the left and right sides of a microscope stage. It can be used to manipulate the primary needle holder in applications such as Drosophila, C. elegans, Xenopus, and Zebrafish microinjection. It also can be used in other applications such as mammalian oocyte microinjection, where it can be used as a versatile holding-pipette manipulator and for Yeast Tetrad microdissection. *Please note that the P-1A Height Adjustment Plate (not included) is required to attach the MN-151 to Narishige's bracket systems. A needle holder, such as our MINJ-4, Narishige's HI-7, H-7 or HI-9, also needs to be purchased separately.
Specification
Accessories included
B-8B Ball Joint
Movement range
Coarse
X25mm, Y20mm, Z25mm
Fine movement: Z axis 8mm Full rotation of fine knob 500um Minimum graduation 5um
Joystick control 1:150 - 1:15 (X-Y plane movement ratio)
Dimensions/Weight
W95 x D90 x H110mm, 470g
FAQ's
Q: What are the main differences between the MN-151 and MN-153 micro manipulators?
A: MN-153 and MN-151 both have 3-axis course movement. MN-153 has an additional fine movement in the X-axis (the direction toward the sample) and no fine movement in Y or Z. MN-151 has an additional fine movement in the Z-axis (lowering down to the same plane as the sample) plus it has the joystick for fine, coordinated movement in X and Y. If you move the joystick left and right, the needle moves towards and away from the sample, respectively. If you move the joystick toward you or away from your, the needle moves toward you and away from you in the Y axis, respectively. The MN-151 makes it easier to line up the needle before injection. However, the biggest advantage is that the needle moves at a speed proportional to the speed you move the joystick, so it is easier to make the needle pierce the eggs.
Q: What are the types of mounting adapter needed to attach the MN-151 to the scope? Does the mounting adaptor attach below or behind the stage?
A: The NZ-19-2 mounts on the illumination pillar, not onto the stage. This makes it really easy to change samples, because on your scope, you can set it so that you can tilt the pillar toward the back, which will cause the micromanipulator to lift up and out of the way. The NZ-19-2 goes out to the side, NR2 goes up, and the MN-151 includes a P-1A bracket to come back toward you with a bar to mount the micromanipulator.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Narishige's MN-153 is a three axis coarse/fine direct drive micromanipulator with the capability of fine movement on the X-axis, enabling accurate linear approach to the cell with no danger of causing it any serious damage. Employment of the bar mount system provides complete installation flexibility and greatly broadens the range of possible applications.
*For attachment to the microscope, P-1A height adjustment plate (not included) and a suitable adaptor is required (standard accessories). *The ball joint that attaches the micromanipulator can be replaced by MMO-220A single-axis oil hydraulic micromanipulator (sold separately). *A needle holder, such as our MINJ-4, Narishige's HI-7, H-7 or HI-9, also needs to be purchased separately.
Specification
Accessories included
B-8B Ball Joint
Movement range
Coarse
X25mm, Y20mm, Z25mm
Fine
X8mm Full rotation of knob 250µm Minimum graduation 5µm
Dimensions/Weight
W105 x D36 x H145mm, 330g
FAQ's
Q: What are the main differences between the MN-151 and MN-153 micro manipulators?
A: MN-153 and MN-151 both have 3-axis course movement. MN-153 has an additional fine movement in the X-axis (the direction toward the sample) and no fine movement in Y or Z. MN-151 has an additional fine movement in the Z-axis (lowering down to the same plane as the sample) plus it has the joystick for fine, coordinated movement in X and Y. If you move the joystick left and right, the needle moves towards and away from the sample, respectively. If you move the joystick toward you or away from your, the needle moves toward you and away from you in the Y axis, respectively. The MN-151 makes it easier to line up the needle before injection. However, the biggest advantage is that the needle moves at a speed proportional to the speed you move the joystick, so it is easier to make the needle pierce the eggs.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Coarse Micromanipulator
MN-3333:
$1,189.19
†
- Special Order
Narishige's MN-3333 is a three axis coarse micromanipulator designed as thin as possible to enable recording with multiple microelectrodes. The X-4 Rotating X-Blocks (sold separately) can be used to place many microelectrodes close together without occupying too much space.
*Use X-4 X-blocks and GJ-8 magnetic stand or equivalent equipment to attach this model. *Changing the H-1 that attaches the manipulator to optional oil hydraulic micromanipulator such as MO-10 enables remote controlled X axis fine movement.
Specification
Accessories
H-1 Electrode Holder, Allen Wrench
Movement range
Coarse
X40mm, Y12mm, Z30mm
Dimensions/Weight
W126 x D43 x H125mm, 260g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Coarse Manipulator
MN-4:
$1,621.62
†
- Ships in 1-5 days
Narishige's MN-4 is a manual coarse manipulator that can be used in conjunction with a liquid hydraulic micromanipulator to transfer the pipette into the microscope view field. Since its operation is manual, this model offers excellent response and impressive economy. Compared with the MMN-1, setup and installation are straightforward. Return and rotating mechanisms are included for easy pipette exchange.
Specification
Accessory included
Allen Wrench
Movement range
Coarse
X30mm, Y30mm, Z30mm
Dimensions/Weight
W125 x D110 x H135mm, 0.6kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Two-Axis Universal Micromanipulator (with Tilt and Pivot Mechanism)
MP-1:
$3,567.57
†
- Special Order
Narishige's MP-1 is a two axis universal "Peteruch type" manipulator. This model features coarse and fine movement units for each of two dimensions (X- and Z-axis). Pivot and tilt functions are provided for very precise operations, and the pole for angle adjustment is the folded type for setting angles on the MP-1's main body.
*GJ-10 magnetic stand (sold separately) is attached to tilting stand
Specification
Accessories
H-1 Electrode Holder, Special Screwdriver, Allen Wrench
Movement range
Coarse
X60mm, Z50mm
Fine
X4mm, Z4mm, Full rotation of knob 250um Minimum graduation 10um
With pivot and tilt mechanism
Dimensions/Weight
W150 x D130 x H175mm, 3.7kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Universal Micromanipulator incorporating a sub-stage for fine manipulations in the Y-axis (with Tilt and Pivot Mechanism)
MP-2:
$4,464.86
†
- Ships in 1-5 days
Narishige's MP-2 model combines sub-stage M-1, which allows fine movement manipulations in the Y-axis, with the MP-1 micromanipulator, which is only for manipulation in the X- and Z-axes. This allows three-dimensional movement in addition to numerous other functions, which include an easy-to-use tilting stand and pivot/tilt mechanisms.
Different models for right- and left-handed users are available. Please specify right- or left-handed model when ordering.
Specification
Accessories included
H-13 Electrode Holder Special Screwdriver Allen Wrench
Movement range
Coarse
X60mm, Z50mm
Fine
X4mm, Z4mm Full rotation of knob: 250µm Minimum graduation: 10µm
Y40mm Full rotation of knob: 500µm Minimum graduation: 10µm
Pivot and tilt mechanism
Dimensions/Weight
W150 × D130 × H210mm, 4.8kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Coarse/Fine Micromanipulator ideal for patch clamping with solid body, stability and practicality.
MX-1:
$4,281.08
†
- Special Order
Narishige's MX-1 is a manual micromanipulator specially designed to overcome problems of drift caused by temperature change, and to minimize the jitters invariably associated with manual operation. Coarse and fine movements can be performed for each axis and fine control with 1um minimum gradations is possible. Incorporation of a rotation mechanism makes it easy to attach and detach microelectrodes.
Different models for right- and left-handed users are available. Please specify right- or left-handed model when ordering.
*Separately sold tilting stand mountable.
Specification
Accessories
H-1 Electrode Holder, Spanner, Allen Wrench, Tension Adjustment Pin
Movement range
Coarse
X35mm, Y30mm
Fine
X4mm, Y4mm Full rotation of knob 100um Minimum graduation 1um
Z coaxial handle
Coarse and fine 24mm Full rotation of knob 18mm (coarse), 200um (fine)
Dimensions/Weight
W210 x D160 x H210mm, 3.4kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Coarse/Fine Micromanipulator with Tilting Stand for More Convenient Patch Clamping
MX-2:
$4,702.70
†
- Ships in 1-5 days
Narishige's MX-2 is a three-axis coarse/fine micromanipulator comprised of the MX-1 and an attached TM-1 tilting stand, for easier and more convenient patch clamping. Its unique structure prevents hand jitters passing to the tip of the microelectrode, and obviates concerns about drifting caused by temperature fluctuations. The tilting stand offers outstanding stability and allows the manipulator to be set at any angle for easier approach to the specimen. Furthermore, it enables the manipulator to move horizontally as well as vertically in line with the microelectrode. The stand has a magnetic base, so (as long as an iron plate is used) installation is possible even when no screw holes are provided. A rotating mechanism is also included, making the exchange of microelectrodes easy.
Different models for right- and left-handed users are available. Please specify right- or left-handed model when ordering.
Specification
Accessories included
H-13 Electrode Holder Spanner Allen Wrench Tension Adjustment Pin
Movement range
Coarse
X35mm, Y30mm
Fine
X4mm, Y4mm Full rotation of knob: 100µm Minimum graduation: 1µm
Z-axis coaxial handle
Coarse/fine movement range: 24mm Full rotation of coarse handle: 18mm Full rotation of fine handle: 200µm
Dimensions/Weight
W210 × D180 × H265mm, 6.7kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Coarse/Fine Micromanipulator for Installation on the Stage Side of a Microscope (with Tilting, Rotation Mechanism)
- Special Order - Pricing Available Upon Request
Narishige's MX-3 is a smaller MX model for installation on the stage side of a microscope. This model includes the MX's special patch clamping features, but in a more compact, space-saving version. A tilting board (included) is attached via an adaptor, allowing the whole body to be set at different angles and enabling easy approach to the microelectrode from the side of the microscope. A rotation mechanism is also included to facilitate attachment/detachment of microelectrodes.
Different models for right- and left-handed users are available. Please specify right- or left-handed model when ordering.
*For attachment to the microscope, a suitable adaptor is required (sold separately)
Specification
Accessories
H-1 Electrode Holder, Spanner, Allen Wrench, Tension Adjustment Pin
Movement range
Coarse
X25mm, Y23mm
Fine
X3mm, Y3mm, Full rotation of knob 100um Minimum graduation 1um
Z coaxial handle
Coarse/Fine movement range 26mm Full rotation of coarse knob 18mm Full rotation of fine knob 200um
Dimensions/Weight
W160 x D117 x H180mm, 1.9kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Coarse/Fine Micromanipulator and Magnetic Base for Installation on the Stage Side of a Microscope (with Tilting, Rotation Mechanism)
MX-4:
$3,891.89
†
- Ships in 1-5 days
Narishige's MX-4 model includes the MX's special patch clamping features, excellent stability, but in another more compact, space-saving version. The tilting stand has a magnetic base for unrestricted installation, and allows the whole body to be set at different angles in order to facilitate approaching your target with microelectrodes. A rotation mechanism is also included for easy attachment/detachment of microelectrodes.
Different models for right- and left-handed users are available. Please specify right- or left-handed model when ordering.
Specification
Accessories included
H-13 Electrode Holder Spanner Allen Wrench Tension Adjustment Pin
Movement range
Coarse
X25mm, Y23mm
Fine
X3mm, Y3mm Full rotation of knob: 100µm Minimum graduation: 1µm
Z-axis coaxial handle
Coarse/fine movement range: 26mm Full rotation of coarse handle: 18mm Full rotation of fine handle: 200µm
Dimensions/Weight
W143 × D106 × H265mm, 2.85kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Coarse/Fine Manual Micromanipulator
NMN-21:
$4,108.11
†
- Ships in 1-5 days
Narishige's NMN-21 is a manually operated micromanipulator which minimizes jitter for simplicity and high performance.
Drift and electromagnetic disturbance are critical problems in patch clamping work. This mechanical micromanipulator was developed specifically for patch clamping: it does not employ a liquid hydraulic system (which is prone to drift due to temperature changes), has no springs (a common cause of mechanical drift), nor a motor (which can be a source of electrical noise). Its body is designed to absorb vibrations, so that even at high magnifications, problems of jittering are virtually non-existant. The NMN-21 is based on a drum type design and utilizes a pair of independent sliders that serve to isolate vibrations. In addition, vibrations are often caused by the operator handling the control knob, which is usually connected to a slider. To overcome this problem, the control knob of the NMN-21 is fixed independently and separate from the slider. High mass and a low center of gravity provide exceptionally steady and stable performance. The overall design is compact, so installation requires a minimum of space. With coarse and fine manipulators integrated into the compact body, this model handles a full range of required motions, from moving a microelectrode into the microscope field of view to making delicate contact with cells.
* Can be mounted directly on an optical bench-type isolation table * Can be firmly fixed to any part of a steel isolation table with the NMN-C magnetic stand (sold separately) * Can be mounted directly to microscopes via suitable adapters (sold separately) * AP-14/AP-13-3 patch clamp headstage holders can be attached via the integrated UST-2 solid universal joint
Setting Example The first photo shows a mounting adapter setting example. The second photo shows the setting example with the ITS2-N/ ITS2-O/ ITS2-Z/ ITS2-L (Microscope Isolation Systems) plus NR-12 (Rotating Micromanipulator Clamp) plus NMN-21.
X15mm, Y15mm, Z15mm Full rotation of knob: approx. 4mm
Fine
X6mm, Y6mm, Z6mm Full rotation of knob: 250um Minimum graduation: 1um
Dimensions/Weight
W110 x D170 x H105mm, 930g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Narishige's NMN-25 packs similar features to those of the NMN-21 into a thinner drive unit to facilitate multi-channel recording. The placement of all three axes' control knobs in one plane instead of three, and the adoption of a simpler holder fixing block, enables several manipulators to be installed and operated close together without interfering with each other. Installation on an isolation table makes use of multiple manipulators straightforward. Like the NMN-21, which was developed specially for patch clamping, this mechanical manipulator integrates coarse and fine movements, and employs a body design which absorbs vibrations. As a result, operation is precise, stable, and free from concerns about drift and electromagnetic disturbance.
*For attachment directly to a microscope, a suitable adaptor is required (sold separately). *The micromanipulator can be mounted directly on the isolation table, or for quickly changing samples or electrodes, use the NMN-25A dedicated slider base for NMN-25. *AP-13-3/AP-14 patch clamp headstage holders can be attached to this unit (sold separately).
Specification
Accessories included
Dedicated Universal Joint, Fixing Plate, H-12 Electrode Holder, Allen Wrench
Movement range
Coarse
X15mm, Y15mm, Z15mm Full rotation of knob: approx. 4mm
Fine
X6mm, Y6mm (total Y Course+Fine travel 15mm), Z6mm Full rotation of knob: 250µm
Dimensions/Weight
W155 X D60 X H100mm, 600g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Sliding Base - Dedicated slider for NMN-25
NMN-25A:
$616.22
†
- Ships in 5-7 days
Sliding Base
Dedicated slider for NMN-25
The NMN-25A is designed to attach the bottom of NMN-25 . It helps with quick electrode changes and high reproducibility when moving the electrode into the field of view. It can be placed with a magnet and enables easy setup on ITS or the IP iron plate.
Retracting position / Working position
Specification
Accessories included
Allen Wrench
Dimensions/Weight
W52 × D185 × H60mm, 27.5g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Oil Hydraulic Micromanipulators
Single-Axis Oil Hydraulic Fine Micromanipulator and Three-axis Coarse Micromanipulator
MO-150:
$3,513.51
†
- Discontinued
Narishige's MO-150 is an oil hydraulic single-axis fine micromanipulator capable of approaching the specimen without vibration. Based on the M-152, this version adds the capability of oil hydraulic fine movement on the X-axis, enabling accurate, vibration-free linear approach to the cell with no danger of causing it any serious damage. Employment of the bar mount system provides complete installation flexibility and greatly broadens the range of possible applications.
*For attachment to the microscope, P-1A height adjustment plate (sold separately) and a suitable adaptor is required (standard accessories). *Attached universal joint can be replaced by the MMO-220A single-axis oil hydraulic micromanipulator (sold separately).
X10mm, Full rotation of knob 500um Minimum graduation 2um
Dimensions/Weight
Control unit
W70 x D115 x H100mm, 1.15kg
Driving unit
W94 x D36 x H155mm, 280g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Accessories
Muscle Fixing Apparatus
A-2:
$1,189.19
†
- Discontinued
Narishige's A-2 Muscle Fixing Apparatus facilitates insertion of a microelectrode into muscle or nerve fibers by gripping both ends of the muscle or nerve fiber and holding it under tension by stretching both ends mildly.
Note that Narishige's A-2 is a component of Narishige's A-3 and needs rest of the components of A-3 for using it. If you want to use A-2 independently, we recommend that you attach it to the stand using Narishige's X-Block.
Specifications
Movement range
Fine
Y30mm
Dimensions/Weight
W160 x D130 x H40mm, 500g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Ultracompact Micromanipulator
MO-903A:
$486.49
†
- Special Order
Narishige's MO-903A is part of MO-903, an ultracompact micromanipulator whose coarse control permits the initial positioning of a microelectrode near the target point, while the fine control enables fine approaches toward the target point. Used in combination with MO-903B. The coarse control permits the coarse positioning of a microelectrode near the target point.
Specification
Accessory included
Allen Wrench
Movement range
Coarse
Z40mm
Dimensions/Weight
W12 × D8 × H51mm, 7g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Ultracompact Micromanipulator
MO-903B:
$562.16
†
- Special Order
Narishige's MO-903B is part of MO-903, an ultracompact micromanipulator whose coarse control permits the initial positioning of a microelectrode near the target point, while the fine control enables fine approaches toward the target point. The fine control knob can be hand-manipulated or controlled with the supplied allen wrench. Used in combination with MO-903A, it permits coarse and fine micromanipulation. (Refer to MO-903.) Permits placement in any given position on the outer circumference of the grid case ( MO-903C).
Specification
Accessory included
Allen Wrench
Movement range
Fine
Z10mm Full rotation of knob 300µm
Dimensions/Weight
W11 × D4 × H20mm, 2g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Grid Case For Ultracompact Manipulator
MO-903C:
$464.86
†
- Ships in 1-5 days
Narishige's MO-903C is part of MO-903, an ultracompact micromanipulator whose coarse control permits the initial positioning of a microelectrode near the target point, while the fine control enables fine approaches toward the target point. Used in combination with MO-903A/ MO-903B. The use of multiple micromanipulators permits multi-channel operation. The grid has 0.5mm-dia. holes with 1mm pitches. The use of the grid makes do without a guide tube and permits accurate approach toward the target point.
Specification
Accessory included
Allen Wrench
Dimensions/Weight
ø21 × H10mm, 8g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Cap For Ultracompact Manipulator
MO-903D:
$86.49
†
- Ships in 1-5 days
Narishige's MO-903D is part of MO-903, an ultracompact micromanipulator whose coarse control permits the initial positioning of a microelectrode near the target point, while the fine control enables fine approaches toward the target point. With the experiment finished or when intending to conduct continuous recording, the animal can be set free by putting this cap on. When resuming recording, simply remove the cap. In this way, the use of this cap permits long hours of recording without having to reset the manipulators.(It is possible to put the cap on while the microelectrode is being held by the fine micromanipulator ( MO-903B)
Specification
Accessory included
Allen Wrench
Dimensions/Weight
ø32 × H29mm, 8g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Mounting Chamber For Manipulator
MO-903E:
$97.30
†
- Ships in 1-5 days
Narishige's MO-903E is part of MO-903, an ultracompact micromanipulator whose coarse control permits the initial positioning of a microelectrode near the target point, while the fine control enables fine approaches toward the target point. A standard chamber to allow the grid case ( MO-903C) to be fixed on the animal.Available for use with MO-95/951, MO-96/96A, and MO-97/97A.
Specification
Accessory included
Screws for Fixture
Dimensions/Weight
W34 × D30 × H23mm, 15g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instruments
Muscle Fixing Apparatus
A-1:
$2,378.38
†
- Discontinued
Narishige's A-1 Muscle Fixing Apparatus facilitates insertion of a microelectrode into muscle or nerve fibers by gripping both ends of the muscle or nerve fiber and holding it under tension by stretching both ends mildly.
Normally, insertion of a microelectrode into muscle or nerve fiber is very difficult. Narishige's A-1 apparatus makes it easy by gripping both ends of the muscle or nerve fiber, stretching them and then holding the specimen under tension. Using the tweezers mounted on the ball joint, both ends of fibers of any length can be held, and moved in the Y-or Z-axis. Also attached is a stand, which allows vertical adjustment and on which the specimen is placed.
Specifications
Movement range
Coarse/Fine
Z50mm/Y50
Dimensions/Weight
W90 x D140 x H170mm, 4kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Muscle Fixing Apparatus with Micromanipulator
A-3:
$2,918.92
†
- Discontinued
Narishige's A-3 Muscle Fixing Apparatus with Micromanipulator facilitates insertion of a microelectrode into muscle or nerve fibers by gripping both ends of the muscle or nerve fiber and holding it under tension by stretching both ends mildly. The A-2, which grips and stretches both ends of muscle fibers and holds them under tension, is mounted on this manipulator. In addition to the three-dimensional coarse movement, fine movement in the Z-axis is included to enable vertical adjustment.
Specifications
Movement range
Coarse
X30mm, Y30mm, Z40mm
Fine
Y30mm
Z coaxial handle
Full rotation of coarse knob 18mm Full rotation of fine knob 200um
Dimensions/Weight
W170 x D150 x H220mm, 3.95kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Ultracompact Coarse/Fine Micromanipulator
MO-903:
$1,513.51
†
- Special Order
Narishige's MO-903 is an ultracompact micromanipulator whose coarse control permits the initial positioning of a microelectrode near the target point, while the fine control enables fine approaches toward the target point. The use of the grid permits accurate approach toward the target point without the help of a guide pipe. After fixed to the target point, the animal can be set free by detaching the coarse manipulator;MO-903A and putting the cap (MO-903D) on.
*This is a set of: MO-903A, MO-903B, MO-903C, MO-903D, and MO-903E. *With the addition of extra MO-903A/B units, multi-channel operation is possible. *Full turn of knob: 0.3mm.Adjustable in a fore-and-aft direction. The fine control knob can be hand-manipulated or controlled with a wrench-driver.
Specification
Movement range
Coarse: 40mm, Fine: 10mm
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Manipulator
SM-30:
$756.76
†
- Discontinued
Narishige's SM-30 is a simple, two-dimensional auxiliary manipulator. This two-dimensional coarse manipulator is for performing various auxiliary tasks with stereotaxic instruments. Despite its simple, compact design, it has a long working range and can use holders ranging in size from 7mm to up to 14mm. Attachment to Y-1 is recommended, mainly using X-12 X-blocks.
Specification
Movement range
Coarse
X40mm, Z30mm
Others
Fixing bar 12mm
Dimensions/Weight
W115 x D20 x H105mm, 200g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Water Hydraulic Micromanipulators
Three-Axis Coarse Mechanical Micromanipulator with Fine Water Hydraulic Z-Axis Control. Ideal for experiments under low magnification
MWS-31:
$5,135.14
†
- Ships in 1-5 days
Narishige's MWS-31 is a one-axis water hydraulic micromanipulator combined with a three-dimensional manual coarse manipulator for patch clamping applications under low magnifications, such as when using a stereo microscope. Even at low magnifications, vibration is a critical problem, so a large and rigid manual manipulator is used to prevent it. The rotation mechanism makes exchanging pipettes easier, and the water hydraulic 1:5 cartridge system enables more stable and precise operation. An angle adjustment mechanism is equipped on the fine movement section so that an angle can be added for the fine movement section only, while coarse section retains its vertical position. This allows the manipulator angle to be changed between horizontal and vertical while the manipulator itself remains firmly fixed in position.
X38mm, Y25mm, Z30mm With tension adjustment mechanism
Fine
2mm Full rotation of knob 50µm Minimum graduation 0.2µm
Dimensions/Weight
Control unit
W70 × D115 × H100mm, 1.15kg
Drive unit
W190 × D145 × H200mm, 1.15kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Independently usable one-axis water hydraulic micromanipulator for stereomicroscopes (Magnetic Mount)
MWS-32:
$5,459.46
†
- Ships in 1-5 days
Narishige's MWS-32 combines a magnetic stand with the MWS-31, so that it can be used independently. Direct attachment to the magnetic stand provides enhanced stability required for applications with stereo microscopes. Like MWS-31, MWS-32 also has a water hydraulic 1:5 cartridge system, angle adjustment mechanism for firm fixing, and a rigid manual coarse manipulator. A unique feature of MWS-32 is that the manipulator is fixed directly to a rigid magnetic stand, thereby making the vertical adjustments more stable. This integration of the magnetic stand allows independent use in a variety of applications by freeing the manipulator from a stereomicroscope.
X38mm, Y25mm, Z30mm With tension adjustment mechanism
Fine
2mm Full rotation of knob 50µm Minimum graduation 0.2µm
Dimensions/Weight
Control unit
W70 × D115 × H100mm, 1.15kg
Drive unit
W200 × D100 × H240mm, 2.45kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Specification
