†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Direct-Drive Micromanipulators
Ball joint w/ adjustable clamp C-1
BC-3:
$778.38
†
- Special Order To Be Discontinued
The compact, adjustable clamp C-1 comes mounted on a ball joint, and can be used for various assisting purposes. The ball joint mounting enhances ease of use by allowing one to change the angle relative to the mounting bar.
*Mounting bar sold separately.
*Use GJ-1 magnetic stand or equivalent equipment to attach this model.
When ordering, please indicate if the unit will be mounted on the right or left side as there are two different versions of the BC-3 clamp... or get one of each!
Specifications
Accessories included
XY Control Knob, Allen Wrench
Movement range:
Coarse
Z19mm
Fine
X15mm, Y6mm
Dimensions/Weight
W80 x D46 x H96mm, 250g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Ball joint w/ adjustable clamp C-2
BC-4:
$870.27
†
- Group II Special Order
The compact, adjustable clamp C-2 comes mounted on a ball joint, and can be used for various assisting purposes. The ball joint mounting enhances ease of use by allowing one to change the angle relative to the mounting bar.
*Mounting bar sold separately.
*Use GJ-1 magnetic stand or equivalent equipment to attach this model.
When ordering, please indicate if the unit will be mounted on the right or left side as there are two different versions of the BC-4 clamp... or get one of each!
BC-4L
BC-4R
Specifications
Accessories included
XY Control Knob, Allen Wrench
Movement range:
Coarse
Z24mm
Fine
X15mm, Y6mm
Dimensions/Weight
W80 x D46 x H96mm, 300g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Coarse/Fine Joystick-Type Micromanipulator with Tilting Apparatus (Magnetic Mount)
MJ-2:
$4,594.59
†
- Discontinued
Narishige's MJ-2 is a three-axis coarse/fine micromanipulator freely fixed with a magnetic stand, with joystick control for better operability. Thanks to incorporation of a joystick, micro tools can be freely controlled on both X and Y planes. Rotating the lever changes the moving ratio, so adjustment is easy.
Three-dimensional movement is possible, with coarse movement provided on the X and Y axes, and coaxial coarse and fine movement on the Z axis. The MJ-2 is firmly and freely attached by using the magnetic stand, and the approach angles can be set via the tilting plate.
Full rotation of coarse knob 18mm Full rotation of fine knob 200um
Dimensions/Weight
W160 x D115 x H220mm, 2.9kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Coarse/Fine Micromanipulator ideal for patch clamping with solid body, stability and practicality.
MX-1:
$4,281.08
†
- Special Order
Narishige's MX-1 is a manual micromanipulator specially designed to overcome problems of drift caused by temperature change, and to minimize the jitters invariably associated with manual operation. Coarse and fine movements can be performed for each axis and fine control with 1um minimum gradations is possible. Incorporation of a rotation mechanism makes it easy to attach and detach microelectrodes.
Different models for right- and left-handed users are available. Please specify right- or left-handed model when ordering.
*Separately sold tilting stand mountable.
Specification
Accessories
H-1 Electrode Holder, Spanner, Allen Wrench, Tension Adjustment Pin
Movement range
Coarse
X35mm, Y30mm
Fine
X4mm, Y4mm Full rotation of knob 100um Minimum graduation 1um
Z coaxial handle
Coarse and fine 24mm Full rotation of knob 18mm (coarse), 200um (fine)
Dimensions/Weight
W210 x D160 x H210mm, 3.4kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Coarse/Fine Micromanipulator with Tilting Stand for More Convenient Patch Clamping
MX-2:
$4,702.70
†
- Ships in 1-5 days
Narishige's MX-2 is a three-axis coarse/fine micromanipulator comprised of the MX-1 and an attached TM-1 tilting stand, for easier and more convenient patch clamping. Its unique structure prevents hand jitters passing to the tip of the microelectrode, and obviates concerns about drifting caused by temperature fluctuations. The tilting stand offers outstanding stability and allows the manipulator to be set at any angle for easier approach to the specimen. Furthermore, it enables the manipulator to move horizontally as well as vertically in line with the microelectrode. The stand has a magnetic base, so (as long as an iron plate is used) installation is possible even when no screw holes are provided. A rotating mechanism is also included, making the exchange of microelectrodes easy.
Different models for right- and left-handed users are available. Please specify right- or left-handed model when ordering.
Specification
Accessories included
H-13 Electrode Holder Spanner Allen Wrench Tension Adjustment Pin
Movement range
Coarse
X35mm, Y30mm
Fine
X4mm, Y4mm Full rotation of knob: 100µm Minimum graduation: 1µm
Z-axis coaxial handle
Coarse/fine movement range: 24mm Full rotation of coarse handle: 18mm Full rotation of fine handle: 200µm
Dimensions/Weight
W210 × D180 × H265mm, 6.7kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Coarse/Fine Micromanipulator for Installation on the Stage Side of a Microscope (with Tilting, Rotation Mechanism)
- Special Order - Pricing Available Upon Request
Narishige's MX-3 is a smaller MX model for installation on the stage side of a microscope. This model includes the MX's special patch clamping features, but in a more compact, space-saving version. A tilting board (included) is attached via an adaptor, allowing the whole body to be set at different angles and enabling easy approach to the microelectrode from the side of the microscope. A rotation mechanism is also included to facilitate attachment/detachment of microelectrodes.
Different models for right- and left-handed users are available. Please specify right- or left-handed model when ordering.
*For attachment to the microscope, a suitable adaptor is required (sold separately)
Specification
Accessories
H-1 Electrode Holder, Spanner, Allen Wrench, Tension Adjustment Pin
Movement range
Coarse
X25mm, Y23mm
Fine
X3mm, Y3mm, Full rotation of knob 100um Minimum graduation 1um
Z coaxial handle
Coarse/Fine movement range 26mm Full rotation of coarse knob 18mm Full rotation of fine knob 200um
Dimensions/Weight
W160 x D117 x H180mm, 1.9kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Coarse/Fine Micromanipulator and Magnetic Base for Installation on the Stage Side of a Microscope (with Tilting, Rotation Mechanism)
MX-4:
$3,891.89
†
- Ships in 1-5 days
Narishige's MX-4 model includes the MX's special patch clamping features, excellent stability, but in another more compact, space-saving version. The tilting stand has a magnetic base for unrestricted installation, and allows the whole body to be set at different angles in order to facilitate approaching your target with microelectrodes. A rotation mechanism is also included for easy attachment/detachment of microelectrodes.
Different models for right- and left-handed users are available. Please specify right- or left-handed model when ordering.
Specification
Accessories included
H-13 Electrode Holder Spanner Allen Wrench Tension Adjustment Pin
Movement range
Coarse
X25mm, Y23mm
Fine
X3mm, Y3mm Full rotation of knob: 100µm Minimum graduation: 1µm
Z-axis coaxial handle
Coarse/fine movement range: 26mm Full rotation of coarse handle: 18mm Full rotation of fine handle: 200µm
Dimensions/Weight
W143 × D106 × H265mm, 2.85kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Coarse/Fine Manual Micromanipulator
NMN-21:
$4,108.11
†
- Ships in 1-5 days
Narishige's NMN-21 is a manually operated micromanipulator which minimizes jitter for simplicity and high performance.
Drift and electromagnetic disturbance are critical problems in patch clamping work. This mechanical micromanipulator was developed specifically for patch clamping: it does not employ a liquid hydraulic system (which is prone to drift due to temperature changes), has no springs (a common cause of mechanical drift), nor a motor (which can be a source of electrical noise). Its body is designed to absorb vibrations, so that even at high magnifications, problems of jittering are virtually non-existant. The NMN-21 is based on a drum type design and utilizes a pair of independent sliders that serve to isolate vibrations. In addition, vibrations are often caused by the operator handling the control knob, which is usually connected to a slider. To overcome this problem, the control knob of the NMN-21 is fixed independently and separate from the slider. High mass and a low center of gravity provide exceptionally steady and stable performance. The overall design is compact, so installation requires a minimum of space. With coarse and fine manipulators integrated into the compact body, this model handles a full range of required motions, from moving a microelectrode into the microscope field of view to making delicate contact with cells.
* Can be mounted directly on an optical bench-type isolation table * Can be firmly fixed to any part of a steel isolation table with the NMN-C magnetic stand (sold separately) * Can be mounted directly to microscopes via suitable adapters (sold separately) * AP-14/AP-13-3 patch clamp headstage holders can be attached via the integrated UST-2 solid universal joint
Setting Example The first photo shows a mounting adapter setting example. The second photo shows the setting example with the ITS2-N/ ITS2-O/ ITS2-Z/ ITS2-L (Microscope Isolation Systems) plus NR-12 (Rotating Micromanipulator Clamp) plus NMN-21.
X15mm, Y15mm, Z15mm Full rotation of knob: approx. 4mm
Fine
X6mm, Y6mm, Z6mm Full rotation of knob: 250um Minimum graduation: 1um
Dimensions/Weight
W110 x D170 x H105mm, 930g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Narishige's NMN-25 packs similar features to those of the NMN-21 into a thinner drive unit to facilitate multi-channel recording. The placement of all three axes' control knobs in one plane instead of three, and the adoption of a simpler holder fixing block, enables several manipulators to be installed and operated close together without interfering with each other. Installation on an isolation table makes use of multiple manipulators straightforward. Like the NMN-21, which was developed specially for patch clamping, this mechanical manipulator integrates coarse and fine movements, and employs a body design which absorbs vibrations. As a result, operation is precise, stable, and free from concerns about drift and electromagnetic disturbance.
*For attachment directly to a microscope, a suitable adaptor is required (sold separately). *The micromanipulator can be mounted directly on the isolation table, or for quickly changing samples or electrodes, use the NMN-25A dedicated slider base for NMN-25. *AP-13-3/AP-14 patch clamp headstage holders can be attached to this unit (sold separately).
Specification
Accessories included
Dedicated Universal Joint, Fixing Plate, H-12 Electrode Holder, Allen Wrench
Movement range
Coarse
X15mm, Y15mm, Z15mm Full rotation of knob: approx. 4mm
Fine
X6mm, Y6mm (total Y Course+Fine travel 15mm), Z6mm Full rotation of knob: 250µm
Dimensions/Weight
W155 X D60 X H100mm, 600g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Sliding Base - Dedicated slider for NMN-25
NMN-25A:
$616.22
†
- Ships in 5-7 days
Sliding Base
Dedicated slider for NMN-25
The NMN-25A is designed to attach the bottom of NMN-25 . It helps with quick electrode changes and high reproducibility when moving the electrode into the field of view. It can be placed with a magnet and enables easy setup on ITS or the IP iron plate.
Retracting position / Working position
Specification
Accessories included
Allen Wrench
Dimensions/Weight
W52 × D185 × H60mm, 27.5g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Micromanipulators
Kleindiek Ultra-precise Force Measurement System
FMS-LS:
$15,330.90
†
- Approx. 30 days
The Force measurement system is an accessory to the micromanipulator that allows you to perform measurements and nanoindentation. The attachment is connected to a controller which displays force feedback, and plays the resonance frequencies of your materials on a loudspeaker.
The system consists of a force sensor with integrated pipette holder, control module with preamplifier and a loudspeaker, PC software, a power supply, and an operator's handbook.
Applications
Measurement of elastic parameters of cells, Young's modulus, spring constants of MEMS and resonance frequencies
Nanoindentation
Specifications
Resolution: sub-µN
Force range: up to 10 mN
Output: +/- 10 V
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Kleindiek Ultra-precise Piezo-motor Micromanipulator System
Quantity Pricing
$17,295.14
† - Regular price.
$16,754.59
† - 2 or more.
$16,214.05
† - 3 or more.
$15,673.51
† - 4 or more.
Top Features:
Easy setup: no cumbersome brackets to fiddle around with; just place the sturdy magnetic micromanipulator onto your microscope stage and start injecting! The NanoControl box and Joypad/Joystick/Cube sit next to the microscope for easy access and ergonomic ease.
Virtually impervious to vibration
Very low drift (1 nm/min) (yes, that is 1 nanometer!)
Sub-nanometer resolution (0.25nm)
Extensive working range (100cm3)
Integrated coarse and fine movement in one unit
High operating velocity (up to 10mm/sec!)
The Kleindiek Nanotechnik MM3A Micromanipulator is a convenient, amazingly precise, and effective solution for patch clamp experiments, in-vitro fertilization (IVF / ICSI), transgenic construction, embryo manipulation, chromosomal dissection, and any types of work that require ultra-precise movement control. It features the ability to move very quickly to the desired location, while maintaining a precision of less than a nanometer! This is over 20 times more precise than any of the Narishige micromanipulators that we offer, and over 40 times more precise than Eppendorf TransferMan® NK 2, InjectMan® NI 2 and PatchMan® systems. If you want incredible precision and stability without sacrificing your working range and operating velocity, this is the micro-manipulator for you!
The MM3A can be maneuvered very easily in all axes using the joystick control. This ergonomic intuitive user interface combined with a wide range of movement speeds makes the Kleindiek Nanotechnik MM3A ideal for microinjection and micro-dissection.
The MM3A is also ideal for patch clamp experiments in the neurobiology lab. It is literally the best micromanipulator for electrophysiology because it is easy to maneuver quickly into place, offers nanometer-level precision when making the fine adjustments to contact the neuron's cell membrane, and yields a stable signal throughout the experiment because it has virtually no drift (unlike fine hydraulic micromanipulators that drift in response to subtle temperature changes).
Below is a diagram of how the controls of the MM3A work. The NanoController and the Joypad (top two devices shown in the diagram) are included with the MM3A. Under the standard factory settings, the buttons on the joypad are used to move in coarse mode. The two joysticks can control in either fine or coarse mode depending on your speed selection. Additionally, you can set a home / park position that the micromanipulator can move quickly to and from when performing multiple injections.
For easier high-precision control (such as positioning a patch clamp pipette), we recommend the Cube, a manual control device with three high-resolution vernier dials (bottom device shown on the diagram). It gives you highly responsive, intuitive, linear movement control. It connects directly to the NanoControl control electronics in addition to your choice of joystick.
The course movement range is several centimeters and, once near your target, the standard fine working range of the MM3A is 20 µm. If you want a larger fine mode working range, add the Booster option. This module for the NanoControl control electronics doubles the fine mode working range.
Specifications:
Dimensions
57.1mm x 20.4mm x 25.4mm
Weight
45g
Movement Range
Travel range in the linear axis - 12mm Travel range in the rotational axes - 240°
Operating Velocity
Up to 10mm/sec
Precision
0.25nm resolution
Accessories Included
Pipette holder for 1mm or 2mm pipettes
Magnetic mounting foot
Microscope stage adapter plate
Connectors for pipette pressurization and headstage
NanoControl control electronics with joypad and software for Windows 98/NT/ME/2K/XP.
Check out the link below for more details, and a video of the MM3A-LS in action on Kleindiek's website: http://www.nanotechnik.com/mm3a-ls.html
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Manipulator for experiments using stereo microscopes.
MWS-1:
$1,027.03
†
- Discontinued
Narishige's MWS-1 is a manual manipulator developed for experimental tasks under low magnifications using a stereo microscope. An adaptor attachment is employed according to the size of the stand with which the illumination equipment is integrated. Its compact size makes it possible to place the unit close to the specimen. A pipette rotation and return mechanism is included to simplify pipette exchange.
*For attachment to the microscope, a suitable adaptor is required (sold separately).
Specification
Accessories included
UT-2 Universal Joint, H-7 Pipette Holder, Allen Wrench
Movement range
Coarse
X15mm, Y15mm, Z15mm
Dimensions/Weight
W105 x D115 x H110mm, 300g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Kleindiek Ultra-precise Lift-Out Shuttle
SY-LOS:
$58,372.97
†
- Approx. 30 days
The Lift-Out Shuttle is a super-fast, dedicated lift-out solution for preparing samples for ex-situ electron microscopy. It features a microgripper, a four-axis substage, and a small CCD camera at surface level that allows for fast approach.
The system is comprised of a four-axis substage mounted on an ultra-compact platform. A microgripper is mounted above the substage to facilitate the lift-out. The stage is manipulated to position the pre-cut sample under the microgripper. After that, the microgripper clamps onto the sample and holds it gently, but firmly enough that the sample can be freed from the bulk material by simply dropping the stage down and out of the way. Once isolated, the sample is brought in contact with SEM-compatible glue on a TEM grid, and cured with an ion beam.
To see a video of this process in action, please follow the link to Kleindiek's website: http://www.nanotechnik.com/lift-out-shuttle.html
The system includes control electronics, a joypad, a microgripper, and an operator's handbook.
Specifications:
Substage on load-lock compatible platform
Maximum specimen size: 30mm
Travel: X and Y = 10mm Travel: Z = 3mm Travel: R = 360°(unlimited)
Speed: up to 1mm/s
Resolution: <0.5nm
Cartesian movement
No backlash or reversal play
Simple load-lock solutions for most SEM and FIB tools
Virtually insusceptible to vibrations
Microgripper
High-resolution gripper for transport and assembly of micro-sized objects
Gripping area: (5 to 10 µm)
Resolution: 20nm
Gripping force: 5 to 5000 µN (variable)
Maximum span range: 20 to 40 µm
SemCam
Small camera at sample surface level
Allows fast approach
Includes monitor and LED illumination
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Narishige's PC-100 glass micropipette puller is a dual-stage vertical pipette puller system that provides reliable and consistent production of micropipets / glass needles with tip sizes ranging from 10 microns (10µm) to tenths of a µm.
The PC-100 incorporates several key features that make it an ideal choice for producing microinjection needles and pipettes for patch clamp experiments. The built-in power source is specially stabilized to deliver a uniform amount of current to the heating coil each time to make uniform glass needles and pipettes. The pulling force is provided by the earth's gravity, so you can't get much more stable or reliable than that. There are no electromagnetic coils to burn out. The force can be varied by adding or removing the included weight blocks (all of which are shown installed in the photo).
Heater levels for both single and double pull operations can be adjusted, and the heater level is shown by a highly-visible digital display.
During the pulling process, micropipettes are shielded from air currents by the use of an acrylic shroud. This excludes external drafts that might otherwise affect the shape and size of the micropipette.
Two pairs of weights (two light and two heavy) are provided for adjustment of the pulling force. Also included are a spare heater coil (PC-10H), and a sample of 1.0mm I.D. glass microcapillary tubes with internal glass fiber (GD-1).
Narishige now offers the more automatic and full-featured PC-100 to replace the old PC-10, PP-830, PP-83, and even older model PB-7. It serves as a lower-cost and more robust alternative to Sutter's P-30. In fact, we use the PC-100 here at Tritech Research to pull our pre-pulled microcapillary needles (see MINJ-PP) that we sell for C. elegans, Drosophila, Xenopus, Zebrafish, and transgenic mouse work.
Here is a video that shows how PC-100 parameters affect needle tip length and taper:
Specification
Accessories included
GD-1 Glass Capillary with filament sample pack, Spare PC-10H Heater, Power Cord
Q: How can I troubleshoot my broken PC-100 to find out what the issue is? For example, if the display only reads 0.0 and will not increase nor will the coil heat when the red button is pushed.
A: First, for doing your testing, we suggest using the "Heater" setting on the selector switch, rather than the Step setting, so that the heater will be on all the time and not be dependent on the button push, carriage position, etc. A blown fuse would result in no display at all. You can see what happens by removing the fuse and comparing to see if the fuse is currently "working". Checking / changing the heating coil is a great place to start. If it isn't making good contact on both sides or is broken or nearly broken, that would definitely cause a problem and it might be intermittent at first.
Q: After recently replacing the coil and adjusting the heaters, my PC-100 is still having issues. I am not able to pull any decent pipettes. What could be the issue?
A: In general, higher temperatures will give a longer, finer tip and lower temperatures will give a more blunt tip. Please also check that the new heater is positioned so that the glass tube goes exactly down the middle of the coil (for even heating).
Q: How can I set the parameters of the PC-100 to achieve a specific type of needle tip?
A: There are many variables to get a particular size needle opening equivalent to a particular resistance. These include not only the settings of the puller, but also the glass used, the type of heater used in the puller, its condition, etc. Our main suggestion is that you contact a lab that is doing similar experiments and try to replicate their protocol for preparing your pipettes. The PC-100 can do both single and double pulls, so I'd start by finding out with is better / more typical. Generally speaking, a higher heater setting will give a longer thinner tip, and a lower setting will give a shorter tip that goes from the full size to a point over a shorter distance. Using all of the weights makes the tip get fine and be sharp quickly, and using less weights makes the tip longer and more gradual. The tip may come out of the puller with the right size opening, or sometimes the tips will come out completely sealed, and you will have to perform a secondary operation to open the end of the pipette to the size desired. For example, you can use the acid etching protocol described in the FAQ section at the bottom of this page.
Q: Our PC-100 has stopped working and seems to be overheating. What are some troubleshooting tips?
A: The first thing we recommend is checking the heating element itself. Make sure that it is not bent or touching back on itself (if you have the coil type). Also make sure that it is still perfectly centered around the pipette, and not nicked.
Q: How can I replace the coil on the PC-100?
A: First make sure the unit is unplugged / off, because the heater is pre-heated even between pulls, it's just not orange-hot. There are little metal bars that hold the heater on each side. You loosen / remove them to change the heater. The tedious part is that when you put the new coil in, you have to carefully position it so that the capillary tube will go right through the center. This is done best by having a piece of glass in the unit before the final tightening of the bars.
Q: Can the PC-100 produce sharp electrodes needed for purposes with resistances around 50 MegaOhms?
A:Yes, the PC-100 is great for pulling very sharp pipettes with a sub-micron opening.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Oil Hydraulic Micromanipulators
Single-Axis Oil Hydraulic Fine Microdrive Micromanipulator (Skull Mounting)
MO-95:
$4,972.97
†
- Special Order
Narishige's MO-95 is a remote-controlled oil-hydraulic micromanipulator for chronic experiments on the skulls of middle size animals, mainly monkeys. Employment of the oil hydraulic system enables microelectrodes to be inserted by remote control, without vibration. The chamber method is used, so that slight movements by the subject animal will not dislodge the microelectrode, while attachment/ detachment can be done freely. The acrylic XY stage makes it easy to position the microelectrodes with great accuracy while visually confirming their location. Microelectrodes ranging from 0.3 to 2mm can be used, by adjusting the positions of the packing and the microelectrodes themselves. Since this model uses the microelectrode expose method, any kind of microelectrode can be used. When the chain bar is filled with Ringer's solution, brain activity stops and long time recording becomes possible.
Specification
Accessories included
Chamber, Cap, Stainless Pipe (O.D.0.7 x 60mm), Threaded Bar, Fixing Screws
Movement range
Coarse
Z50mm
Fine
Z10mm, Full rotation of knob 500um Minimum graduation 2um
Dimensions/Weight
Control unit
W70 x D115 x H100mm, 1.15kg
Drive unit
W60 x D60 x H150mm, 100g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Oil Hydraulic Micromanipulator
MO-96:
$6,756.76
†
- Discontinued
Narishige's MO-96 is a oil hydraulic micromanipulator meant to be mounted on the skull of a medium-sized animal such as monkeys to perform chronic experiments. Its 15mm fine movement range permits deeper brain insertion of a microelectrode. The MO-96 allows a separately available guide tube to be fitted for precise positioning and insertion of a microelectrode into hard tissue or deep brain cells. Despite these added features, the drive unit has reduced its weight to lighten the burden on the animal.
Its remotely controlled oil hydraulic system permits vibration-free insertion of a microelectrode. With the detachable/attachable drive unit fixed on the skull mount chamber, even if the animal head moves, the microelectrode can be held in position. A transparent acrylic X-Y stage permits visual observation of the microelectrode insertion. By adjusting the positions of the gasket and the electrode holder, various types of microelectrodes can be used with the MO-96. The skull mount chamber can be filled with Ringer's solution to bring the functioning of the brain to a complete halt, which permits recording for prolonged periods of time.
*Used in combination with a pulse motor microdrive, this system permits even more accurate operation.
Z15mm, Full Turn of Knob500um, Minimum Graduation2um
Dimensions/Weight
Control Unit
W70 x D115 x H100mm Approx. 1.15kg
Drive Unit
W63 x D63 x H112mm Approx. 110g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Oil Hydraulic Micromanipulator
MO-96A:
$6,756.76
†
- Ships in 1-5 days
Narishige's MO-96A is an oil hydraulic micromanipulator meant to be mounted on the skull of a medium-sized animal such as monkeys to perform chronic experiments. Its 15mm fine movement range permits deeper brain insertion of a microelectrode. The MO-96A allows a separately available guide tube to be fitted for precise positioning and insertion of a microelectrode into hard tissue or deep brain cells. Despite these added features, the drive unit has reduced its weight to lighten the burden on the animal.
Its open-type stage permits visual observation of the microelectrode insertion while operating the X- and Y- axis control knobs, and also permits multi-channel operation as well as the use of microelectrodes of various types. The remotely controlled oil hydraulic system permits vibration-free insertion of a microelectrode. With the detachable/attachable drive unit fixed on the skull mount chamber, even if the animal head moves, the microelectrode can be held in position.
*With the drive unit detachable from the chamber, the MO-96A permits the use of chambers
Specifications
Accessories included
Skull Mount Chamber Unit (equipped with a drive unit connector) : 1 unit Chamber Cap (fitted to Skull Mount Chamber) : 1 piece Fixing Screws : 10 pieces Stainless Steel Tubing (f0.7 x 60mm) : 10 pieces Threaded Round Bar : 1 piece Spacer : 1 piece
Movement Range
Coarse
Z50mm
Fine
Z15mm, Full Turn of Knob500um, Minimum Graduation2um
Dimensions/Weight
Control Unit
W70 x D115 x H100mm 1.15kg
Drive Unit
W61 x D46 x H120mm 75g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Oil Hydraulic Micromanipulator (Closed-Type)
MO-97:
$7,405.41
†
- Special Order
Narishige's MO-97 is an oil hydraulic micromanipulator meant to be mounted on the skull of a medium-sized animal such as monkeys to perform chronic experiments. Its 30mm fine movement range permits deeper brain insertion of a microelectrode. The MO-97 allows a separately available guide tube to be fitted for precise positioning and insertion of a microelectrode into hard tissue or deep brain cells. Despite these added features, the drive unit has reduced its weight to lighten the burden on the animal.
Its remotely controlled oil hydraulic system permits vibration-free insertion of a microelectrode. With the detachable/attachable drive unit fixed on the skull mount chamber, even if the animal head moves, the microelectrode can be held in position. A transparent acrylic X-Y stage permits visual observation of the microelectrode insertion. By adjusting the positions of the gasket and the electrode holder, various types of microelectrodes can be used with the MO-97. The skull mount chamber can be filled with Ringer's solution to bring the functioning of the brain to a complete halt, which permits recording for prolonged periods of time.
*Used in combination with a pulse motor microdrive, this system permits even more accurate operation.
Specifications
Accessories included
Chamber Cap 1 piece Stainless Steel Tubing (f0.7 x 60mm) : 10 pieces Threaded Round Bar : 1 piece Fixing Screws : 10 pieces Spacer : 1 piece
Movement Range
Coarse
Z50mm
Fine
Z30mm, Full Turn of Knob500um, Minimum Graduation2um
Dimensions/Weight
Control Unit
W70 x D115 x H100mm, 1.15kg
Drive Unit
W63 x D63 x H121mm, 125g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Oil Hydraulic Micromanipulator (Open-Type)
MO-97A:
$7,405.41
†
- Ships in 1-5 days
Narishige's MO-97A is an oil hydraulic micromanipulator meant to be mounted on the skull of a medium-sized animal such as monkeys to perform chronic experiments. Its 30mm fine movement range permits deeper brain insertion of a microelectrode. The MO-97A allows a separately available guide tube to be fitted for precise positioning and insertion of a microelectrode into hard tissue or deep brain cells. Despite these added features, the drive unit has reduced its weight to lighten the burden on the animal.
Its open-type stage permits visual observation of the microelectrode insertion while operating the X- and Y- axis control knobs, and also permits multi-channel operation as well as the use of microelectrodes of various types. The remotely controlled oil hydraulic system permits vibration-free insertion of a microelectrode. With the detachable/attachable drive unit fixed on the skull mount chamber, even if the animal head moves, the microelectrode can be held in position.
*With the drive unit detachable from the chamber, the MO-97A permits the use of chambers of various shapes. Consult us for details. *Used in combination with a pulse motor microdrive, this system permits even more accurate operation.
Specifications
Accessories included
Skull Mount Chamber Unit (equipped with a drive unit connector) : 1 unit Chamber Cap (fitted to Skull Mount Chamber) : 1 piece Fixing Screws : 10 pieces Stainless Steel Tubing (f0.7 x 60mm) : 10 pieces Threaded Round Bar : 1 piece Spacer : 1 piece
Movement Range
Coarse
Z50mm
Fine
Z30mm, Full Turn of Knob500um, Minimum Graduation2um
Dimensions/Weight
Control Unit
W70 x D115 x H100mm, 1.15kg
Drive Unit
W61 x D46 x H130mm, 95g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Micromanipulator (Thin-type, Single Axis, Oil Hydraulic System
SM-25C:
$3,891.89
†
- Ships in 1-5 days
Narishige's SM-25C thin micromanipulator which can place several microelectrodes close together. This micromanipulator is for multi-channel recording with stereotaxic instruments, and is designed to be as thin as possible without compromising its stability. A fixing holder is employed to fix the microelectrodes, in the same way as thin plates hold the microelectrodes.
Rotation mechanisms are equipped for all three planes, and the horizontal plane can be rotated with the operating handle. This makes it possible to set the microelectrode angles and easily position the microelectrodes close together. There are three types (A, B and C) in this series, differentiated by the arrangement of their Z-axismovement unit. The C-type features an oil hydraulic, remote controlled movement for stable, accurate operation.
Specification
Movement range
Coarse
X40mm, Z40mm
Fine
Z10mm(oil), Full rotation of knob 250um, Minimum graduation 1um
Dimensions/Weight
Control unit
W70 x D115 x H100mm, 1.15kg
Drive unit
W125 x D28 x H157mm, 380g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Accessories
Muscle Fixing Apparatus
A-2:
$1,189.19
†
- Discontinued
Narishige's A-2 Muscle Fixing Apparatus facilitates insertion of a microelectrode into muscle or nerve fibers by gripping both ends of the muscle or nerve fiber and holding it under tension by stretching both ends mildly.
Note that Narishige's A-2 is a component of Narishige's A-3 and needs rest of the components of A-3 for using it. If you want to use A-2 independently, we recommend that you attach it to the stand using Narishige's X-Block.
Specifications
Movement range
Fine
Y30mm
Dimensions/Weight
W160 x D130 x H40mm, 500g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Patch Clamp Headstage Holder: Adapter (for Axon)
AP-12A:
$129.73
†
- Ships in 1-5 days
Narishige's AP-12A adapter is used for connecting Axon patch amplifiers, chiefly to B-9 (attached to MHW-3).
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Patch Clamp Headstage Holder: Adapter (for List)
AP-12L:
$129.73
†
- Discontinued
Narishige's AP-12L adapter is used for connecting Line patch amplifiers, chiefly to B-9 (attached to MHW-3).
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Patch Clamp Headstage Holder: Adapter (Block-equipped for B-9)
AP-13-2:
$167.57
†
- Ships in 1-5 days
Narishige's AP-13-2 block equipped adapter is used for connecting the Axopatch 200B amplifier to Narishige products.
*Type 2: Block-equipped for B-9 (Equivalent to AP-12)
Specifications
Accessories included
Allen Wrench
Dimensions/Weight
AP-13-2
W64 x D26 x H15mm, 28g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Patch Clamp Headstage Holder: Adapter (Block-equipped for powerful universal joint)
AP-13-3:
$167.57
†
- Ships in 1-5 days
Narishige's AP-13-3 block equipped adapter is used for connecting the Axopatch 200B amplifier to Narishige products.
*Type 3: Block-equipped type for powerful universal joint (Equivalent to AP-14)
Specifications
Accessories included
Allen Wrench
Dimensions/Weight
AP-13-3
W64 x D26 x H12mm, 27g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Axon Patch Clamp Headstage Holder: Adapter
AP-14A:
$129.73
†
- Ships in 1-5 days
Narishige's AP-14A adapters are used for connecting Axon patch amplifiers to the powerful universal joint.
*Attachable Solid Universal Joints: UST-1, UST-2, UST-3 etc.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Line Patch Clamp Headstage Holder Adapter
AP-14L:
$129.73
†
- Discontinued
Narishige's AP-14L adpaters are used for connecting Line's patch amplifiers to the powerful universal joint.
*Attachable Solid Universal Joints: UST-1, UST-2, UST-3 etc.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Nihon Koden Patch Clamp Headstage Holder Adapter
AP-14N:
$129.73
†
- Discontinued
Narishige's AP-14N adapters are used for connecting Nihon Koden's patch amplifiers to the powerful universal joint.
*Attachable Solid Universal Joints: UST-1, UST-2, UST-3 etc.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Patch Clamp Headstage Holder (with Ball Joint)
APB-13:
$378.38
†
- Ships in 1-5 days
This is a headstage adapter to attach a variety of electrophysiology headstages to almost any of our micromanipulators. Axon Multi Clamp 700B (CV-7B) and Heka EPC-10 are examples. With the APB-13 these can be mounted via a standard 7 mm diameter mounting bar. The headstage angle can be adjusted and locked via the ball joint.
For the EPC-10, the headstage mounting bracket (a plate with dovetail) is provided by HEKA.
Specifications
Accessories included
Mounting Screw & Hex Wrench
Dimensions/Weight
W82 x D26 x H57mm, 70g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Ear Bar for SN Series
EB-1:
$416.22
†
- Special Order
Narisihige's EB-1 is a standard ear (in a pair) bar for use with the SN series stereotaxic instruments.
Specifications
Length/Weight
L115mm, 80g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Hollow Ear Bar for SN Series
EB-2A:
$541.62
†
- Special Order. Limited Stock. To Be Discontinued
Narisihige's EB-2A is a special ear bar for the SN series. The A-type is hollow inside and can be used for auditory experiments.
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Nonrupture Ear Bar
EB-2B:
$491.89
†
- Special Order. Limited Stock. To Be Discontinued
Narishige's EB-2B is a special ear bar for the SN series. The B-type has a special design tip which does not hurt the soft ear opening.
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Rat Ear Bar
EB-2C:
$541.62
†
- Special Order. Limited Stock. To Be Discontinued
Narishige's EB-2C is a special ear bar for the SN series. The C-type is used for rats, in combination with adaptor RA-4.
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Guinea Pig Ear Bar
EB-2D:
$541.62
†
- Special Order. Limited Stock. To Be Discontinued
Narishige's EB-2D is a special ear bar for the SN series. The D-type is for guinea pigs and used in combination with adaptor RA-3.
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Rat Ear Bar for SR Series
EB-3A:
$232.43
†
- Ships in 1-5 days
Narishige's EB-3A is a rat ear bar for SR series Stereotaxic Instruments.
Specification
Dimensions/Weight
L70mm, 36g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Mouse Ear Bar for SR Series
EB-3B:
$232.43
†
- Ships in 1-5 days
Narishige's EB-3B is a mouse Ear Bar for SR series Stereotaxic Instruments.
Specification
Dimensions/Weight
L70mm, 36g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Auxiliary Rat Ear Bar
EB-4N:
$756.76
†
- Ships in 1-5 days
Narishige's EB-4N is an auxiliary rat ear bar for use with the SR series stereotaxic instruments. It can be attached to the rat before the rat is set on the stereotaxic instrument. The smooth sliding system allows you to feel the delicate holding touch. After use, the EB-4N can be disassembled for cleaning.
Specification
Dimensions / Weight
W36-53 x D37 x 10mm, 32g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Auxiliary Mouse Ear Bar
EB-5N:
$756.76
†
- Ships in 1-5 days
Narishige's EB-5N is an auxiliary mouse ear bar for use with the SR series stereotaxic instruments. It can be attached to the mouse before the mouse is set on the stereotaxic instrument. The smooth sliding system allows you to feel the delicate holding touch. After use, the EB-5N can be disassembled for cleaning.
Specification
Dimensions / Weight
W36-53 x D37 x 10mm, 32g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Auxiliary Mouse Ear Bar
EB-6:
$756.76
†
- Ships in 1-5 days
Narishige's EB-6 is a more friendly auxiliary mouse ear bar for use with the SR series stereotaxic instruments. The design keeps the eardrum intact and reduces injury to the mouse ear tube. The fixing points are more dull, making it easier to fix the ear tube without puncturing anything or causing bleeding in the ear. The user saves on recovery time due to perforated eardrums and ear tube injuries, and can quickly move on to the next imaging / recording procedure. This non-rupture-point ear bar is also more practical for chronic and awake experiments.
This picture shows the EB-6 attached to the SR-5M-HT sterotaxic frame for mouse research:
Specification
Dimensions / Weight
W45 ~ 63 x D37 x H12mm, 35g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Gas Masks For Rats
GM-3:
$389.19
†
- Ships in 1-5 days
Narishige's GM-3 gas masks for rats permits easy installation on the new stereotaxic instrument Models SR-5M, SR-5R, SR-6M, and SR-6R. It is intended for use with anesthesia vaporizers. With the tube connected, these gas masks serve the purpose of administering anesthetics. With the three-point clamping arrangement undisturbed, these gas masks permit the nose clamp and ensure secure fixing. The compact design does not interfere with experimental procedures.
*Consult us if you wish to install these gas masks on such devices as head holding adaptors or old-type stereotaxic instruments.
Specification
tr>
Dimensions/Weight
W22 × D35 × H19mm, 18g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Gas Masks For Mice
GM-4:
$389.19
†
- Ships in 1-5 days
Narishige's GM-4 gas masks for mice permits easy installation on the new stereotaxic instruments Models SR-5M, SR-5R, SR-6M, and SR-6R. It is intended for use with anesthesia vaporizers. With the tube connected, these gas masks serve the purpose of administering anesthetics. With the three-point clamping arrangement undisturbed, these gas masks permit the nose clamp and ensure secure fixing. The compact design does not interfere with experimental procedures.
*Consult us if you wish to install these gas masks on such devices as head holding adaptors or old-type stereotaxic instruments.
Specification
tr>
Dimensions/Weight
W20 × D28 × H14mm, 10g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Footswitch for IMS-20
IMS-20F:
$194.59
†
- Ships in 3-5 days
The IMS-20F footswitch is designed specifically for the Motorized Stereotaxic Microinjector IMS-20 and allows the user to control the start and stop of the injection with the foot in order to keep the hands free to control manipulation of the needle and target.
Specifications
Cable length
1.5m
Dimensions/Weight
W68 x D98 x H28mm, 210g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Electrode Carrier Stand
MA-2:
$810.81
†
- Ships in 1-5 days
Narishige's MA-2 is an electrode carrier stand. This stand is for temporary storage of stereotaxic manipulators when not in use. Specially designed to accommodate the manipulators' particular shape, it is a most useful item.
Specification
Dimensions/Weight
W250 x D150 x H85mm, 2kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Mouse Head Holding Adaptor
MA-6N:
$1,243.24
†
- Ships in 1-5 days
Narishige's MA-6N is a mouse head holding adaptor for use with the SR series stereotaxic instruments. The use of the dovetail mechanism achieved by the application of the proven micromanipulator technology permits smooth adjustments. The MA-6N comes equipped with an improved auxiliary ear bar that is easy to attach and allows you to feel the holding touch.
Specification
Dimensions / Weight
W20 x D98 x H50-70mm, 132g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Ultracompact Micromanipulator
MO-903A:
$486.49
†
- Special Order
Narishige's MO-903A is part of MO-903, an ultracompact micromanipulator whose coarse control permits the initial positioning of a microelectrode near the target point, while the fine control enables fine approaches toward the target point. Used in combination with MO-903B. The coarse control permits the coarse positioning of a microelectrode near the target point.
Specification
Accessory included
Allen Wrench
Movement range
Coarse
Z40mm
Dimensions/Weight
W12 × D8 × H51mm, 7g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Ultracompact Micromanipulator
MO-903B:
$562.16
†
- Special Order
Narishige's MO-903B is part of MO-903, an ultracompact micromanipulator whose coarse control permits the initial positioning of a microelectrode near the target point, while the fine control enables fine approaches toward the target point. The fine control knob can be hand-manipulated or controlled with the supplied allen wrench. Used in combination with MO-903A, it permits coarse and fine micromanipulation. (Refer to MO-903.) Permits placement in any given position on the outer circumference of the grid case ( MO-903C).
Specification
Accessory included
Allen Wrench
Movement range
Fine
Z10mm Full rotation of knob 300µm
Dimensions/Weight
W11 × D4 × H20mm, 2g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Grid Case For Ultracompact Manipulator
MO-903C:
$464.86
†
- Ships in 1-5 days
Narishige's MO-903C is part of MO-903, an ultracompact micromanipulator whose coarse control permits the initial positioning of a microelectrode near the target point, while the fine control enables fine approaches toward the target point. Used in combination with MO-903A/ MO-903B. The use of multiple micromanipulators permits multi-channel operation. The grid has 0.5mm-dia. holes with 1mm pitches. The use of the grid makes do without a guide tube and permits accurate approach toward the target point.
Specification
Accessory included
Allen Wrench
Dimensions/Weight
ø21 × H10mm, 8g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Cap For Ultracompact Manipulator
MO-903D:
$86.49
†
- Ships in 1-5 days
Narishige's MO-903D is part of MO-903, an ultracompact micromanipulator whose coarse control permits the initial positioning of a microelectrode near the target point, while the fine control enables fine approaches toward the target point. With the experiment finished or when intending to conduct continuous recording, the animal can be set free by putting this cap on. When resuming recording, simply remove the cap. In this way, the use of this cap permits long hours of recording without having to reset the manipulators.(It is possible to put the cap on while the microelectrode is being held by the fine micromanipulator ( MO-903B)
Specification
Accessory included
Allen Wrench
Dimensions/Weight
ø32 × H29mm, 8g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Mounting Chamber For Manipulator
MO-903E:
$97.30
†
- Ships in 1-5 days
Narishige's MO-903E is part of MO-903, an ultracompact micromanipulator whose coarse control permits the initial positioning of a microelectrode near the target point, while the fine control enables fine approaches toward the target point. A standard chamber to allow the grid case ( MO-903C) to be fixed on the animal.Available for use with MO-95/951, MO-96/96A, and MO-97/97A.
Specification
Accessory included
Screws for Fixture
Dimensions/Weight
W34 × D30 × H23mm, 15g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Adapter for Stereotaxic Instruments (for Guinea Pigs)
RA-3:
$951.35
†
- Special Order
Narishige's RA-3 is a head holding adapter for use with the SN series with guinea pigs.
The use of the separately available EB-2D special ear bar, makes it usable with a guinea pig.
Specification
Dimensions/Weight
W145 x D40 x H50mm, 300g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Adapter for Stereotaxic Instruments (for Rabbits)
RA-5:
$1,902.70
†
- Special Order
Narishige's RA-5 adapter allows for use of the SN series with rabbits. Since an ear bar is not suitable for a rabbit, this fixing instrument holds the rabbit temple instead, completing the fixation with a standard mouthpiece and eye bar.
Specification
Dimensions/Weight
W200 x D115 x H85mm, 850g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Rat Head Holding Adaptor
RA-6N:
$1,243.24
†
- Ships in 1-5 days
Narishige's RA-6N adapter is used to convert a mouse fixing clamp to a rat fixing clamp. The dovetail structure permits simple adjustment of the mouth and nose clamp position; the procedure can be smoothly and easily performed with one hand. This is also true of the clamping action using an auxiliary ear bar, which is easier than with conventional models.
Specification
Dimensions / Weight
W20 x D98 x H50-70mm, 132g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Head Holding Adaptor (for Rats)
SG-3N:
$1,189.19
†
- Special Order
Narishige's SG-3N and SG-4N mouse/rat head holding devices are capable of use in different variations and offer wide applicability
This simple and compact model is designed for the purpose of fixing the head, with special consideration paid to ease of use on a microscope stage. The clamping method is based on 3-point fixation (mouth, nose and ear), ensuring that the head is easily and firmly fixed in position without damage to even small animals. By attaching the mouth/nose clamp and ear bar to a single bar, the instrument allows the head angle to be freely adjusted through 360. Developed to allow low gravity fixation, the holder's overall size is very compact, making it ideal for fixing a small animal on to a microscope stage. The shape and functions are simple, yet this holder can be used for many different purposes. The SG-3N is for rats, and the SG-4N for mice.
Specification
Base dimensions
W140-180 x D60 x H50mm
Weight
510g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Head Holding Adaptor (for Mice)
SG-4N:
$1,189.19
†
- Discontinued
Narishige's SG-3N and SG-4N mouse/rat head holding devices are capable of use in different variations and offer wide applicability
This simple and compact model is designed for the purpose of fixing the head, with special consideration paid to ease of use on a microscope stage. The clamping method is based on 3point fixation (mouth, nose and ear), ensuring that the head is easily and firmly fixed in position without damage to even small animals. By attaching the mouth/nose clamp and ear bar to a single bar, the instrument allows the head angle to be freely adjusted through 360. Developed to allow low gravity fixation, the holder's overall size is very compact, making it ideal for fixing a small animal on to a microscope stage. The shape and functions are simple, yet this holder can be used for many different purposes. The SG-3N is for rats, and the SG-4N for mice.
When used in combination with an optionally available mounting adaptor, the low-center-of-gravity design enables the detachable head clamp unit to be installed on a microscope stage allowing the securely fixed head of a mouse to be observed under a microscope.
Specification
Base dimensions
W140-180 x D60 x H50mm
Weight
510g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Cannula Holder for SM-15
SHC-1:
$324.32
†
- Ships in 1-5 days
Narishige's SHC-1 holder allows accurate, safe, and quick placement of a cannula of approx.3.5mm in lab animals. Using a stereotaxic instrument and the SM-15 micromanipulator, a cannula can be placed at a specific site safely and accurately. The cannula can be fixed firmly in place just by tightening the screw and easily removed when in place just by loosening the screw. In addition, the tip is plastic so it will not corrode.
SPECIFICATION
Dimensions/Weight
ø5 × L150mm, 29g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Manipulator
SM-12:
$1,351.35
†
- Ships in 1-5 days
Narishige's SM-12 is very simple, economical manipulator for stereotaxic instruments and can be mounted by various methods. A coarse movement unit is provided for the most important movement (vertical), while position adjustment for the others can be done with sliders. Rotation mechanisms are employed for the vertical and horizontal directions, enabling easy approach from any required tilting angle.
Specification
Accessories included
Screw Allen Wrench
Movement range
Coarse
Z65mm
Dimensions/Weight
W140 × D47 × H220mm, 900g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Direction Changing Bar for SM-12
SM-12H:
$261.62
†
- Special Order
Narishige's SM-12H is a direction changing bar attached to the SM-12 , this bar is used to change the manipulator's direction through 90 degrees and to adjust the tilting angle of the SM-12 .
*SM-12 sold separately
Specification
Height/Weight
H130mm, 150g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Multielectrode Holder for SM-12
SM-12P:
$101.62
†
- Special Order
Narishige's SM-12P is a multielectrode holder for use with the SM-12 Stereotaxic Micromanipulator. This holder enables simultaneous insertion of a maximum of 12 electrodes for recording or stimulating.
*SM-12 sold separately
Specification
Height/Weight
H120mm, 80g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Multielectrode Holder for SM-15
SM-15P:
$101.62
†
- Special Order
Narishige's SM-15P provides for simultaneous insertion of multiple microelectrodes into a living organism. This multi-electrode holder is attached to the SM-15 for use, replacing the standard SM-15 holder. It allows up to 12 microelectrodes to be arranged in a line, so that several can be inserted into a living organism for simultaneous stimulation and recording of many areas.
Specification
Height/Weight
H145mm, 50g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
SM-20 Electrode Holders (For Three Electrodes)
SM-17:
$1,486.49
†
- Special Order
Narishige's SM-17 holder for three microelectrodes is developed for the SM-20 . It allows three microelectrodes to be placed in adjacent positions, and also features a coarse and fine movement unit in the Z-axis. Can also be used with the SM-21 .
Specification
Accessory
Dedicated electrode holders
Movement range
Coarse
Z40mm
Fine
Z7mm Full rotation of knob 250um Minimum graduation 10um
Dimensions/Weight
W107 x D185 x H100mm, 680g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
SM-20 Electrode Holders (For Two Electrodes)
SM-18:
$118.92
†
- Special Order
Narishige's SM-18 holder for two microelectrodes is developed for the SM-20 . It allows two microelectrodes to be placed in adjacent positions, and also features a coarse and fine movement unit in the Z-axis. Can also be used with the SM-21 Specification
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
SM-20 Electrode Holders (For One Electrode)
SM-19:
$951.35
†
- Special Order
Narishige's SM-19 multi-microelectrode holder is incorporated to the SM-20 . Mounting coarse and fine movement units in the Z-axis enables a wide range of possible uses. Can also be used with the SM-21 .
Specification
Accessory
H-1 Electrode holder
Movement range
Coarse
Z40mm
Fine
Z7mm Full rotation of knob 250um Minimum graduation 10um
Dimensions/Weight
W45 x D170 x H100mm, 400g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Attachment for SMM series to affix syringe or holder
SMM-A:
$410.81
†
- Ships in 5-10 days
Attachment for SMM series to affix syringe or injection holder.
This attachment is intended to hold and move an additional tool with a shaft with 8mm O.D. With this attachment, a micromanipulator from the SMM series can hold two holders at a time. The attachment is affixed with screws in the screw holes on the side of X-axis unit of the SMM series; then the additional tool can be slid its position one end to the other. When a tool from the SMM series is tilted or used with IMS-20, this attachment helps to position the tip of the holder and keeps it from situating beyond the median line.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Holder for using silicon neural probes with SMM series
SMM-HA:
$356.76
†
- Ships in 5-10 days
Holder for Neural Probes
Holder made for using silicon probes with SMM series products
This holder is intended to hold a silicon probe on SMM series products. The silicon probe can be affixed close to the holder shaft to prevent interference around the probe. The holding section is made with resin - thus it does not conduct electricity when in contact with a substrate. (The photograph above shows the holding of a silicon probe by NeuroNexus.)
Thickness: 2mm or less Width: within 2.5 ~ 5mm Length: 12mm or longer
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Holder for using silicon neural probes with SMM series
SMM-HB:
$356.76
†
- Ships in 5-10 days
SMM-HB Holder for Neural Probes
Holder made for using silicon probes with SMM series
This holder is intended to hold a silicon probe on SMM series products. A silicon probe can be affixed with greater distance away from the holder shaft when it is necessary (compared to the SMM-HA that is affixed very close to the shaft.) The holding block is made with resin - thus it does not conduct electricity when in contact with a substrate. The holding section can be detached from the shaft and reversed in orientation (Left-right). (The photograph above shows the holding of a silicon probe by NeuroNexus.)
Thickness: 2mm or less Width: within 2.5 ~ 5mm Length: 12mm or longer
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Cannula holder for SMM series
SMM-HC:
$356.76
†
- Ships in 5-10 days
Cannula Holder for SMM series
This holder is intended to hold a cannula within 3.4mm and 3.5mm O.D. on SMM series. The upper tip of the cannula is visible when affixed - thus it is easy to confirm proper insertion of the cannula. The holding section can be detached from the shaft and changed in orientation (Left-right). Comparatively to SHC-1, the products differ in the diameter of the shaft and the way the cannula is held. (SMM-HC has the shaft with 8mm O.D., and the cannula won't be affixed from the top without covering the upper side of cannula - thus a T-shaped cannula can be affixed as well). The above photo shows the setting example for SR-5M-HT+ SM-100 + SMM-HC.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Multiuse holder for SMM series to affix syringe or injector
SMM-HD:
$410.81
†
- Ships in 5-10 days
Multiuse holder for SMM series to affix a syringe or injection holder
This holder is intended to hold instruments measuring between 4mm O.D. to 10mm O.D., which allows for the MO-10 and MO-82 to be affixed at a low-reach position on SMM series products without using a long holder. The HI-7 and HI-9 microinjection holders (4mm O.D.) and a glass syringe (10mm O.D. or less) can be affixed directly onto this holder as well. The holding section can be detached from the shaft and changed in orientation (Left-right). The above photo illustrates a setting example of the SR-5M-HT + SMM-100 + SMM-HD + MO-10.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Auxilary Fixing Stand for SN-2/SN-3
- Special Order - Pricing Available Upon Request
Narishige's SP-M pole is used to attach a 12mm bar mounting micromanipulator to the base of an SN-2 or SN-3 stereotaxic instrument. Specification
Height/Weight
H375mm, 4.5kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Head Holding Device (for Chronic Experiments on Rats)
SR-10AR:
$4,918.92
†
- Special Order
* The SR-10AR is intended for users who already own a stereotaxic instrument. If you do not have a base plate, please obtain the SR-10R-HT. * Also available is the SR-9AM designed exclusively for mice. * The chamber frame is customizable to your own application. Please contact us for details.
Fixation by the chamber frame enables repeated fixations in the same position in an unanesthetized state
The SR-10AR is a head holding device designed for chronic experiments on rats and can be installed on Narishige's SR series stereotaxic instruments. Fixation by the chamber frame has permitted repeated fixations in the same position in an unanesthetized state, thereby enabling to perform not only acute experiments but also chronic experiments without causing damage to the animal. Without the need for anesthetization, the SR-10AR can be used for visual and/or auditory experiments.
By bonding the chamber frame onto the head of a rat, repeated fixations in the same position in an unanesthetized state have become possible. Once the chamber frame is fixed on the head, without the need for anesthetization, the rat can be stereotaxically fixed without using the mouth/nose clamp or ear bars, enabling the SR-10AR to be used for visual and/or auditory experiments.
Specification
Accessories
EB-3A Ear Bars for rats (in a pair) EB-4N Auxiliary Ear Bar for rats CF-10 Chamber Frame x 5pcs.
Dimension, Weight
W300 x D120 x H80 ~ 96mm, 1.6kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Base plate with two AP frame bars.
SR-6B:
$2,324.32
†
- Ships in 5 - 7 days
Head holding devices in the SR series can be attached to this base plate. Two AP frame bars are included.
AP frame bar size This AP frame has an 18.7mm square shape since Narishige's stereotaxic manipulators are tailored for this standard.
Specifications:
Dimensions/Weight
W400 x D300 x H110mm, 7.65kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Head Holding Device (for Chronic Experiments on Mice)
SR-9AM:
$4,594.59
†
- Special Order
* The SR-9AM is intended for users who already own a stereotaxic instrument. If you do not have a base plate, please obtain the SR-9M-HT. * Also available is the SR-10AR designed exclusively for rats. * The chamber frame is customizable to your own application. Please contact us for details.
Fixation by the chamber frame enables repeated fixations in the same position in an unanesthetized state
The SR-9AM is a head holding device designed for chronic experiments on mice and can be installed on Narishige's SR series stereotaxic instruments. Fixation by the chamber frame has permitted repeated fixations in the same position in an unanesthetized state, thereby enabling to perform not only acute experiments but also chronic experiments without causing damage to the animal. Without the need for anesthetization, the SR-9AM can be used for visual and/or auditory experiments.
By bonding the chamber frame onto the head of a mouse, repeated fixations in the same position in an unanesthetized state have become possible. Once the chamber frame is fixed on the head, without the need for anesthetization, the mouse can be stereotaxically fixed without using the mouth/nose clamp or ear bars, enabling the SR-9AM to be used for visual and/or auditory experiments.
Specification
Accessories
EB-3B Ear Bars for Mice (in a pair) EB-5N Auxiliary Ear Bar for Mice CF-10 Chamber Frame x 5pcs.
Dimension, Weight
W300 x D120 x H80 ~ 96mm, 1.6kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Plate For Attachment of Parts in the SR Series
SR-A:
$778.38
†
- Ships in 1-5 days
The * The plate is customizable for your application.
SR-A Plate is meant for attachment of parts in the SR series like ear bars (EB-3A, EB-3B), auxiliary ear bars (EB-4N, EB-5N), and mouth/nose clamp .
Specification
Dimension, Weight
W300 x D120 x H86mm, 1kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Head Holding Device (for Common Marmosets) converting SR series.
SR-AC:
$3,189.19
†
- Ships in 1-5 days
The SR-AC head holding device can be attached to the SR series and make your stereotaxic instrument usable for common marmosets.
Specification
Accessories
EB-3A Ear Bars Dedicated Auxiliary Ear Bar Hex Wrench
Dimension, Weight
W300 x D200 x H98mm, 1.3kg
* The anesthetic mask (GM-3/GM-4) cannot be attached to this head holder.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Head Holding Device (for Mice) converting SR Series
SR-AM:
$2,216.22
†
- Ships in 1-5 days
Converting your stereotaxic instrument to a head holding device for mice.
The SR-AM head holding device can be attached to the base plate of SR series. Your stereotaxic instrument can be converted to an instrument for mice.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Head Holding Device (for Rats) converting SR Series
SR-AR:
$2,216.22
†
- Ships in 1-5 days
Converting your stereotaxic instrument to a head holding device for rats.
The SR-AM head holding device can be attached to the base plate of SR series. Your stereotaxic instrument can be converted to an instrument for rats.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Multi-Electrode Unit for Electrical Stimulation
SS-1:
$1,200.00
†
- Discontinued
Narishige's SS-1 provides for measuring action potentials from multiple points, e.g. muscle fibers. This unit features microelectrodes and holders to measure action potentials from such places.
Each microelectrode is mounted on a ball joint, which allows full freedom of movement. If used with a U frame of holders, they can be placed at adjacent positions. The holder is equipped with a vertical adjustment handle, so all the microelectrodes can be moved vertically at the same time.
Specification
Accessories
SS-2 Shielded Electrode, Signal Core x 4
Dimensions/Weight
Total
W290 x D60 x H190mm, 1.1kg
Stand
W60 x D80 x H190mm, 780g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Single-Core Sheilded Electrode
SS-2:
$129.73
†
- Discontinued
Narishige's SS-2 is a shielded microelectrode, used to measure action potentials from such place as muscle fibers. The microelectrode is the single-core type and can move freely by means of a ball joint. Used while attached to the SS-1.
Specification
Dimensions/Weight
W200 x D105 x H15mm, 90g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Two-Core Sheilded Electrodes
SS-3:
$145.95
†
- Discontinued
Narishige's, SS-3 is a shielded microelectrode, used to measure action potentials from such place as muscle fibers. The microelectrode is the dual-core type and can move freely by means of a ball joint. Used while attached to the SS-1.
Specification
Dimensions/Weight
W215 x D105 x H15mm, 100g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instruments
Muscle Fixing Apparatus
A-1:
$2,378.38
†
- Discontinued
Narishige's A-1 Muscle Fixing Apparatus facilitates insertion of a microelectrode into muscle or nerve fibers by gripping both ends of the muscle or nerve fiber and holding it under tension by stretching both ends mildly.
Normally, insertion of a microelectrode into muscle or nerve fiber is very difficult. Narishige's A-1 apparatus makes it easy by gripping both ends of the muscle or nerve fiber, stretching them and then holding the specimen under tension. Using the tweezers mounted on the ball joint, both ends of fibers of any length can be held, and moved in the Y-or Z-axis. Also attached is a stand, which allows vertical adjustment and on which the specimen is placed.
Specifications
Movement range
Coarse/Fine
Z50mm/Y50
Dimensions/Weight
W90 x D140 x H170mm, 4kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Muscle Fixing Apparatus with Micromanipulator
A-3:
$2,918.92
†
- Discontinued
Narishige's A-3 Muscle Fixing Apparatus with Micromanipulator facilitates insertion of a microelectrode into muscle or nerve fibers by gripping both ends of the muscle or nerve fiber and holding it under tension by stretching both ends mildly. The A-2, which grips and stretches both ends of muscle fibers and holds them under tension, is mounted on this manipulator. In addition to the three-dimensional coarse movement, fine movement in the Z-axis is included to enable vertical adjustment.
Specifications
Movement range
Coarse
X30mm, Y30mm, Z40mm
Fine
Y30mm
Z coaxial handle
Full rotation of coarse knob 18mm Full rotation of fine knob 200um
Dimensions/Weight
W170 x D150 x H220mm, 3.95kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Head Holding Adaptor for Common Marmosets
CA-6:
$2,216.22
†
- Ships in 1-5 days
This adaptor allows existing SR-series stereotaxic instruments for rats or mice to be used with marmosets. A dovetail is employed in the mouthpiece and eye-bars. It moves so smoothly to allow position adjustment with one hand.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Motorized Stereotaxic Microinjector
IMS-20:
$4,918.92
†
- Ships in 3-5 days
* Stereotaxic instruments, stereotaxic micromanipulator SM-15, attachment SM-15A and syringes are sold separately.
Set-up for injections with ease by inputting a injection time and injection volume while selecting a syringe from the built-in reference table of syringes from Hamilton. A display showing the time-length and volume of the injection allows the user to monitor progress in real-time. Features easy syringe lock with a simple latch mechanism.
* Syringe series from Hamilton as shown above are built in to the reference table. * When you input the inner diameter and volume directly, you can use any syringe except for the built-in syringes in the above reference table.
Specifications
Accessories included
Power Cord (1.5m) Connecting cable (2.0m)
Drive source
5-phase Stepping Motor
Movement range
60mm
Working voltage
AC100V ~ 240V, 50/60Hz
Power consumption
10W
Drive Unit Dimensions/Weight
W30 x D167 x H84mm, 426g
Control Unit Dimensions/Weight
W180 x D95 x H260mm, 2.45kg
* Loadable syringes must be from 6.5mm to less than 9mm in outer diameter. Syringe is not available from Tritech Research. * Attachment SM-15A is required when attaching SM-15. * Footswitch IMS-20F is available for additional control. (Sold separately)
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Motorized Stereotaxic Microinjector
IMS-30:
$4,929.73
†
- Ships in 3-5 days
Set-up for injections with ease by inputting an injection time and injection volume while selecting a syringe from the built-in reference table of syringes from Hamilton. A display showing the time-length and volume of the injection allows the user to monitor progress in real-time. The flow-rate is automatically calculated and displayed from the entered value. The digital display shows the injection status at a glance. All operation keys can be operated intuitively by icons based on easy-read size and layout. A connection bar is included for attachment to a stereotaxic micromanipulator. Depending on the orientation and position of the injector, there are two mounting methods: by a screw-in or by a newly added mounting bracket. By adopting a large retainer for plunger button, it enables easier fixation even if the plunger is thin. The syringe can be held with a flip of the dedicated retainer.
Replacement model for the IMS-20.
* Stereotaxic instruments, stereotaxic micromanipulator and syringes are sold separately. * IMS-30 is recommended to use with SMM series; robust micromanipulators. * By using the Connecting Cable 7m (for MD system) MD-DCE-7, the distance between the control unit and the drive unit can be changed to 7m.
Specifications
Accessories included
Power Cord (1.5m) Connecting cable (1.5m) Dedicated Screw (for attaching manipulator) Hex wrench x 2 Spare fuse (inside of fuse holder)
Drive source
5-phase Stepping Motor
Movement range
60mm
Working voltage
AC100V ~ 240V, 50/60Hz
Power consumption
15W
Drive Unit Dimensions/Weight
W47.5 x D82.5 x H156.5mm, 456g
Control Unit Dimensions/Weight
W180 x D260 x H95mm, 2.5kg
* Loadable syringes must be from 6.5mm to less than 9mm in outer diameter. Syringe is not available from Tritech Research, please purchase separately.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Electrode Position Calibrator
MA-1:
$1,643.24
†
- Ships in 1-5 days
Narishige's MA-1 is an electrode position calibrator. The gauge mark of this instrument coincides with the gauge mark (0 point) of the stereotaxic instrument. The instrument also reads the X,Y, and Z axis coordinates of the electrode carrier and converts them to the scale of the stereotaxic instrument.
Specification
Dimensions/Weight
W275 x D175 x H85mm, 2.8kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Motor-drive Oil Hydraulic Fine Open-Type Micromanipulator System
MDO-974 is the motor-driven oil-hydraulic micromanipulator suitable for in-vivo experiments on middle-sized animals, mainly NHP primates. Based on the manual oil-hydraulic mechanism of MO-97, the hybrid model installed with stepping motor enables speed control as well as greater driving precision, which are impossible to be performed by manual model. As a merit of the hydraulic part that requires no electricity, the hydraulic-tubing line keeps some distance from the motor to the animal's head, so that the sound or noise from the motor is suppressed during the experiment. Operational setting for drive is easy to do, which is completed by entering speed directly, or entering distance and time. The range of drive speed is set as 0.1um/s to 500um/s. The speed can be changed on the way to the target, so you can make the electrode closer to the target with a faster speed, and then change it to slower speed as final small-step approach. The closed chamber is equipped with acrylic XY stage which control knobs drive 18mm on each axis.
* Distance between the control unit and motor unit can be extended from original 2.9m(9.5ft) in total to 7m(28.2ft) by MD-DCE-7 (sold separately). * Palm-sized compact controller MD-OH-1 (sold separately) is also available.
Specifications
Accessories included
Chamber (MO-903E) Chamber Cap SS Guide Tube (ø0.7 × 60mm) Threaded Round Bar Connecting cable (2.9m) Power Cord (2.5m) Spare fuse (inside of fuse holder)
Length of hydraulic tubing
1.5m
Drive source
5-phase Stepping Motor
Movement range
Coarse
Z50mm
Fine
X13mm Y18mm Z30mm (Motor drive)
Setting range
Speed range
0.1um/s ~ 500um/s (0.1um/s increment)
Distance range
1um ~ 30,000um (1um increment)
Time range
1s ~ 60min (0.1s increment)
Working voltage
AC100V ~ 240V, 50/60Hz
Power consumption
15W
Dimensions/Weight
Drive Unit
W61 x D46 x H130mm, 125g
Motor Drive
W98 x D32 x H56mm, approx. 250g
Control unit
W180 x D260 x H95mm, 2.5kg
* The control unit controls one drive unit only; cannot control two or more drive units.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Motor-drive Oil Hydraulic Fine Open-Type Micromanipulator System
MDO-974A is a motor-driven oil-hydraulic micromanipulator suitable for in-vivo experiments on middle-sized animals, mainly NHP primates. Based on the manual oil-hydraulic mechanism of the MO-97A, the hybrid model installed with stepping motor enables speed control as well as greater driving precision, which are impossible to be performed by manual model. As a merit of the hydraulic part that requires no electricity, the hydraulic-tubing line keeps some distance from the motor to the animal's head, so that sound or noise from the motor is suppressed during the experiment. Operational setting for drive is easy to do, which is completed by entering speed directly, or entering distance and time. The range of drive speed is set as 0.1um/s to 500um/s. The speed can be changed on the way to the target, so you can make the electrode closer to the target with a faster speed, and then change it to a slower speed as final small-step approach. The chamber is an open-type that is designed to accommodate multiple drive units and use with grid.
* Distance between the control unit and motor unit can be extended from original 2.9m(9.5ft) in total to 7m(28.2ft) by MD-DCE-7 (sold separately). * Palm-sized compact controller MD-OH-1 (sold separately) is also available. * Grid for the open chamber is available by customized order.
Specifications
Accessories included
Chamber (MO-903E) Chamber Cap SS Guide Tube (ø0.7 × 60mm) Threaded Round Bar Connecting cable (2.9m) Power Cord (2.5m) Spare fuse (inside of fuse holder)
Length of hydraulic tubing
1.5m
Drive source
5-phase Stepping Motor
Movement range
Coarse
Z50mm
Fine
X13mm Y18mm Z30mm (Motor drive)
Setting range
Speed range
0.1um/s ~ 500um/s (0.1um/s increment)
Distance range
1um ~ 30,000um (1um increment)
Time range
1s ~ 60min (0.1s increment)
Working voltage
AC100V ~ 240V, 50/60Hz
Power consumption
15W
Dimensions/Weight
Drive Unit
W61 x D46 x H130mm, 125g
Motor Drive
W98 x D32 x H56mm, approx. 250g
Control unit
W180 x D260 x H95mm, 2.5kg
* The control unit controls one drive unit only; cannot control two or more drive units.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Ultracompact Coarse/Fine Micromanipulator
MO-903:
$1,513.51
†
- Special Order
Narishige's MO-903 is an ultracompact micromanipulator whose coarse control permits the initial positioning of a microelectrode near the target point, while the fine control enables fine approaches toward the target point. The use of the grid permits accurate approach toward the target point without the help of a guide pipe. After fixed to the target point, the animal can be set free by detaching the coarse manipulator;MO-903A and putting the cap (MO-903D) on.
*This is a set of: MO-903A, MO-903B, MO-903C, MO-903D, and MO-903E. *With the addition of extra MO-903A/B units, multi-channel operation is possible. *Full turn of knob: 0.3mm.Adjustable in a fore-and-aft direction. The fine control knob can be hand-manipulated or controlled with a wrench-driver.
Specification
Movement range
Coarse: 40mm, Fine: 10mm
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Head Holder for Rats with Anesthesia Mask
SGM-3:
$2,075.68
†
- Ships in 1-5 days
The SGM-3 is designed for fixing the head simply, for non-stereotaxic fixation. Since the compact design allows itself a low gravity fixation, it can be set under the microscope stage. The clamping method is based on 3 point fixation (mouth, nose and ear) that makes the fixation stable. The nosepiece can be detached and changed and by using the dedicated anesthetic mask, it will be easily to experiment with use of anesthesia. By attaching the holding instrument to a single bar, it the head can be fixed stably and allows the head angle to be freely adjusted through 360°. The shape and functions are simple, yet this holder can be used for many different purposes. The SGM-3 is for rats. The SGM-4 is for mice. The SG-3N (for rats) and SG-4N (for mice) do not include the anesthetic mask.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Head Holder for Mice with Anesthesia Mask
SGM-4:
$2,075.68
†
- Ships in 1-5 days
The SGM-4 is designed for fixing the head simply, for non-stereotaxic fixation. Since the compact design allows itself a low gravity fixation, it can be set under the microscope stage. The 3 point fixation (mouth, nose and ear) makes the fixation stable. The nosepiece can be detached and changed and by using the dedicated anesthetic mask, it will be easy to experiment with use of anesthesia. By attaching the holding instrument to a single bar, it allows the head angle to be freely adjusted through 360°. The shape and functions are simple, yet this holder can be used for many different purposes. The SGM-3 is for rats. The SGM-4 is for mice. The SG-3N (for rats) and SG-4N (for mice) do not include the anesthetic mask.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Head Holding Adaptor (MRI-compatible, for use with Rats)
SGP-3:
$1,589.19
†
- Special Order
Narishige's SGP-3 is a head holder for use in MRI with a holder and base of 100% plastic. The lab animal's head can be firmly held in place at 3 points: the ears, nose, and mouth. The SGP-3 is for rats and the SGP-4 is for mice. The size of the SGP-3 for rats is kept to just under 50mm when the holder is detached from the base; if an MRI scanner has a small opening, the lab animal can be held in place to pass through the scanner. This allows measurements even when using small MRI scanners.
*Specifications are subject to change without notice.
* The anesthetic mask (GM-3) cannot be attached to this head holder.
Specification
Dimensions/Weight
W 150 - 195 × D 60 × H 47 - 67mm, 77g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Head Holding Adaptor (MRI-compatible, for use with Mice)
SGP-4:
$1,589.19
†
- Special Order
Narishige's SGP-4 is a head holder for use in MRI with a holder and base of 100% plastic. The lab animal's head can be firmly held in place at 3 points: the ears, nose, and mouth. The SGP-3 is for rats and the SGP-4 is for mice. The size of the SGP-3 for rats is kept to just under 50mm when the holder is detached from the base; if an MRI scanner has a small opening, the lab animal can be held in place to pass through the scanner. This allows measurements even when using small MRI scanners.
*Specifications are subject to change without notice.
Specification
Dimensions/Weight
W130 - 177 × D60 × H47 - 67mm, 77g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Micromanipulator
SM-11:
$4,216.22
†
- Special Order
Narishige's SM-11 is the most popular (and versatile) micromanipulator for stereotaxic instruments because it can be attached to any of our AP frame bars and provides multi-axis movement. A coarse movement unit with a long working range is attached to the Z-axis, in addition to the fine movement adjustments included for each individual axis. These fine movement units have scales with minimum increments of 10µm (i.e. the total of a single rotation, 500µm, divided into 50 gradations), so that precise adjustments of 10µm are possible. In addition, the Z-axis fine movement unit has a sliding mechanism that enables approximate positioning of the X-axis. A rotation mechanism is provided for each of the X-Y, X-Z and Y-Z planes that allows approach from any required angle. Easy-to-use scales are provided wherever necessary, permitting for operations following a brain chart. Overall, this micromanipulator is simple to use and meets a wide variety of applications.
Specifications:
Accessories included
Dedicated Electrode Holder (for ±1mm) Trim Screw
Movement range
Coarse
Z60mm
Fine
X30mm, Y30mm, Z30mm Full rotation of knob: 500µm Minimum graduation: 10µm
Dimensions/Weight
W150 × D104 × H225mm, 1.75kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Micromanipulator
SM-15:
$2,875.68
†
- Ships in 1-5 days
Compact, versatile, and popular micromanipulator
Narishige's SM-15 is the most popular micromanipulator for stereotaxic instruments, and is attached to the AP bar of the instrument when in use. Coarse movement units with a long working range are attached to both the X-axis and the Z-axis; the latter also has fine movement units attached. The fine movement handle is positioned for ease of use, and jitters from handle operations are not transmitted to the microelectrode tips. Vertical and horizontal rotation mechanisms are both equipped, enabling approaches from any required tilting angle. Easy-to-use scales are provided whenever necessary, for operations following a brain chart. This manipulator has a compact yet rigid design, and can be operated with excellent stability in confined spaces.
Specification
Accessory included
Allen Wrench
Movement range
Coarse
X60mm, Z50mm
Fine
Z8mm Full rotation of knob: 500µm Minimum graduation: 10µm
Dimensions/Weight
W120 × D75 × H180mm, 1.25kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Digital Micromanipulator
SM-20:
$6,956.76
†
- Discontinued
Narishige's SM-20 digital micromanipulator incorporates a digital counter for reading the movement of Z axis. This micromanipulator is desgned for use with stereotaxic instruments. A minimum increment of 1um enables position changes to be read with great precision. This model is light, versatile, adequate in size and very simple to operate.
Specification
Accessories
SM-19 Electrode Holders for SM-20 H-1 Electrode Holder, Allen Wrench
Movement range
Coarse
X20mm, Y20mm
Fine
Z10mm, Full rotation of knob 50um Full rotation of counter 1um
Dimensions/Weight
W110 x D110 x H190mm, 1.6kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Narishige's SM-25A Outfitted Thin micromanipulator can place several microelectrodes close together. This micromanipulator is for multi-channel recording with stereotaxic instruments, and is designed to be as thin as possible without compromising its stability. A fixing holder is employed to fix the microelectrodes, in the same way that thin plates hold the microelectrodes.
Outfitted Rotation mechanisms are equipped for all three planes, and the horizontal plane can be rotated with the operating handle. This makes it possible to set themicroelectrode angles and easily position the microelectrodes close together. There are three types (A, B and C) in this series, differentiated by the arrangement of their Z-axismovement unit. The A-type includes a fine movement unit for precise adjustments.
Specification
Movement range
Coarse
X40mm, Z30mm
Fine
Z10mm, Full rotation of knob 250um, Minimum graduation 10um
Pivot angle adjustment
Dimensions/Weight
W125 x D28 x H172mm, 350g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Manipulator (Thin-type, Coarse Drive)
SM-25B:
$1,567.57
†
- Discontinued
Narishige's SM-25B is a thin micromanipulator which can place several microelectrodes close together. This micromanipulator is for multi-channel recording with stereotaxic instruments, and is designed to be as thin as possible without compromising its stability. A fixing holder is employed to fix the microelectrodes, in the same way as thin plates hold the microelectrodes.
Rotation mechanisms are equipped for all three planes, and the horizontal plane can be rotated with the operating handle. This makes it possible to set the microelectrode angles and easily position the microelectrodes close together. There are three types (A, B and C) in this series, differentiated by the arrangement of their Z-axis movement unit. The B-type provides a simple coarse movement unit.
Specification
Movement range
Coarse
X40mm, Z40mm
Pivot angle adjustment
Dimensions/Weight
W125 x D28 x H157mm, 330g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Manipulator
SM-30:
$756.76
†
- Discontinued
Narishige's SM-30 is a simple, two-dimensional auxiliary manipulator. This two-dimensional coarse manipulator is for performing various auxiliary tasks with stereotaxic instruments. Despite its simple, compact design, it has a long working range and can use holders ranging in size from 7mm to up to 14mm. Attachment to Y-1 is recommended, mainly using X-12 X-blocks.
Specification
Movement range
Coarse
X40mm, Z30mm
Others
Fixing bar 12mm
Dimensions/Weight
W115 x D20 x H105mm, 200g
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Micromanipulator
SMM-100:
$4,702.70
†
- Ships in 1-5 days
The SMM-100 Stereotaxic Micromanipulator is made for use in animal experiments utilizing traditional methods of acute/chronic experiments or electro-physiological recording, as well as for newly developed methods of multi-photostimulations and silicon probes. SMM-100 is equipped with a Y-axis control knob which makes the fine adjustment in the AP direction possible. The upper body of SMM-100 is switchable in either AP or ML direction when using it with tilting angle.
Hex Wrenches (2mm and 2.5mm) Dedicated electrode holder (with attachment and screw) Screw for grounding Washers for grounding (Bellville washer and flat washer)
Movement range
X80mm, Y20mm, Z80mm Full rotation of knob 1mm Minimum graduation 10µm
Dimensions/Weight
W85 × D162 × H256mm, 1.84kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Micromanipulator
SMM-100B:
$4,108.11
†
- Ships in 1-5 days
The SMM-100B Stereotaxic Micromanipulator is made for use in animal experiments using traditional methods of acute/chronic experiments or electro-physiological recording, as well as for newly developed methods of multi-photostimulations and silicon probes. It is designed without a Y-axis control knob so that two or more micromanipulators can be set close together. The upper body of SMM-100B is switchable in either AP or ML directions when using it with tilting angle.
Hex Wrenches (2mm and 2.5mm) Dedicated electrode holder (with attachment and screw) Screw for grounding Washers for grounding (Bellville washer and flat washer)
Movement range
X80mm, Z80mm Full rotation of knob 1mm Minimum graduation 10µm
Dimensions/Weight
W49 × D162 × H241mm, 1.56kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Micromanipulator
SMM-100C:
$4,702.70
†
- Ships in 1-5 days
The SMM-100C is a new coarse manipulator for stereotaxic instruments focusing on driving outside the animal's brain. The driving by Z-axis control knob: approximately 4mm per rotation makes faster adjustments for leveling bregma and lambda, and faster retracting/returning from the dura mater, which will improve efficiency of the experiment. For operations inside the brain, One-axis Motorized Stereotaxic Micromanipulator MDS-1 and hydraulic manipulator can be added optionally. The X-axis is equipped with a coarse control knob, which is the same as the Z-axis. The Y-axis (anterior/ posterior direction) is equipped with a fine control knob. The upper body of SMM-100C is switchable in either AP or ML direction when using it with tilting angle.
* The minimum graduation of the X and Z-axis is 100µm. This manipulator is recommended to be used in combination with a fine micromanipulator (MDS-1, etc).
Set-up example
*Stereotaxic instrument, GM-4, MDS-1, and SMM-HA, the silicon probe in the photo above are not included.
Set-up example with SMM-A
SMM-A is recommended for experiments: tilting in the ML direction. When the manipulator SMM-100C/200C is tilted in the ML direction, the end of the holder (electrode tip) may be far off from animal's head. The attachment SMM-A is designed to attach a holder on the side of manipulator, so it enables the holder position without operating the X-axis. To this end, the holder (electrode tip) can be set to the animal's head while maintaining driving distance of the X-axis. *The set-up example above: motorized MDS-1 and IMS-30 on SMM-100C installed with SMM-A.
Hex Wrenches (2mm and 2.5mm) Dedicated electrode holder (with attachment and screw) Screw for grounding Washers for grounding (Bellville washer and flat washer)
Movement range
X80mm, Z80mm Full rotation of knob 4.2mm Minimum graduation 100µm(Vernier scale) Y20mm, Full rotation of knob 1mm, Minimum graduation 10µm
Dimensions/Weight
W85 × D162 × H256mm, 1.75kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Micromanipulator
SMM-200:
$5,405.41
†
- Ships in 5-10 days
Simultaneous Dual Angles: AP and ML directions
The SMM-200 Stereotaxic Micromanipulator is made for use in animal experiments with traditional methods of acute/chronic experiments or electro-physiological recording, as well as for newly developed methods of multi-photostimulations and silicon probes. The SMM-200 is equipped with a Y-axis control knob which makes the fine adjustment in the AP direction possible. The upper body of SMM-200 can be tilted with dual angles: AP and ML directions simultaneously.
Drill installed on SMM-200
* When the compact drill for Stereotaxic Instruments, SD-101 is installed with the SMM series, SM-15C attachment is required (sold separately).
Hex Wrenches (2mm and 2.5mm) Dedicated electrode holder (with attachment and screw) Screw for grounding Washers for grounding (Bellville washer and flat washer)
Movement range
X80mm, Y20mm, Z80mm Full rotation of knob 1mm Minimum graduation 10µm
Dimensions/Weight
W85 × D162 × H286mm, 2.09kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Micromanipulator
SMM-200B:
$5,405.41
†
- Ships in 5-10 days
The SMM-200B Stereotaxic Micromanipulator is made for use in animal experiments with traditional methods of acute/chronic experiments or electro-physiological recording, as well as for newly developed methods of multi-photostimulations and silicon probes. It is designed without a Y-axis control knob so that two or more micromanipulators can be set close together. The upper body of SMM-200B can be tilted with dual angles: AP and ML directions simultaneously.
Hex Wrenches (2mm and 2.5mm) Dedicated electrode holder (with attachment and screw) Screw for grounding Washers for grounding (Bellville washer and flat washer)
Movement range
X80mm, Z80mm Full rotation of knob 1mm Minimum graduation 10µm
Dimensions/Weight
W49 × D162 × H271mm, 1.77kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Micromanipulator
SMM-200C:
$5,405.41
†
- Ships in 5-10 days
The SMM-200C is a new coarse manipulator for stereotaxic instruments focusing on driving outside the animal's brain. The driving by Z-axis control knob: approximately 4mm per rotation makes faster adjustments for leveling bregma and lambda, and faster retracting/returning from the dura mater, which will improve efficiency of the experiment. For operations inside the brain, One-axis Motorized Stereotaxic Micromanipulator MDS-1 and hydraulic manipulator can be added optionally. The X-axis is equipped with a coarse control knob, which is the same as the Z-axis. The Y-axis (anterior/ posterior direction) is equipped with a fine control knob. The upper body of SMM-200C can be tilted with dual angles: AP and ML directions simultaneously.
* The minimum graduation of the X and Z-axis is 100µm. This manipulator is recommended to be used in combination with a fine micromanipulator (MDS-1, etc).
Set-up example
*Stereotaxic instrument, GM-4, MDS-1, and SMM-HA, the silicon probe in the photo above are not included.
Set-up example with SMM-A
SMM-A is recommended for experiments: tilting in the ML direction. When the manipulator SMM-100C/200C is tilted in the ML direction, the end of the holder (electrode tip) may be far off from animal's head. The attachment SMM-A is designed to attach a holder on the side of manipulator, so it enables the holder position without operating the X-axis. To this end, the holder (electrode tip) can be set to the animal's head while maintaining driving distance of the X-axis. *The set-up example above: motorized MDS-1 and IMS-30 on SMM-200C installed with SMM-A.
Hex Wrenches (2mm and 2.5mm) Dedicated electrode holder (with attachment and screw) Screw for grounding Washers for grounding (Bellville washer and flat washer)
Movement range
X80mm, Z80mm Full rotation of knob 4.2mm Minimum graduation 100µm(Vernier scale) Y20mm, Full rotation of knob 1mm, Minimum graduation 10µm
Dimensions/Weight
W85 × D162 × H286mm, 2.0kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Workstation
- Special Order - Pricing Available Upon Request
Narishige's SN-1N is a versatile, popular stereotaxic instrument used for middle size animals. This stereotaxic instrument is for middle size animals such as cats, small dogs and monkeys. A mouthpiece, eye bar and ear bar are mounted on the U- frame, to enable the zero point of head -- its basic axis -- to be accurately fixed in position, which in turn facilitates fixing of the upper jaw, lower edges of the eye sockets and external ear canals.
A spinal cord fixer is also mounted. The AP frame bar, to which manipulators and the spinal cord fixer are attached, is 18.7mm square in shape, and sufficiently long for several accessories to be attached simultaneously. Loosening the rear fixing bracket in the back allows the U-frame itself to be moved, as well as the unit supported at three points. The instrument body is made of lightweight cast aluminum, and offers wide-ranging versatility, since many kinds of animals can be fixed simply by changing the adapters used for the three support points.
Specification
Base dimensions
W800 x D300 x H250mm
Total weight
approx. 32kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Workstation
SN-2N:
$6,600.00
†
- Special Order
Narishige's SN-2N has a heavy base with a low center of gravity to minimize vibrations. Used for cats, small dogs and monkeys, this instrument has a heavy base with a low center of gravity. To fix the zero point of head -- which is its basic axis -- in position, units for fixing three separate points are mounted on a U-frame.
The AP frame bar is 18.7mm square, and sufficiently long for the attachment of manipulators and various other accessories. The U-frame itself can be moved freely. Numerous screw holes are provided on the base frame to allow the attachment of different kinds of accessories or spinal cord fixing equipment. By changing the adaptors used at the three support points, it is possible to fix many kinds of animals.
Specification
Accessories
Stainless Basin, Bakelite (large) x 1, (small) x 1
Base dimensions
W780 x D292 x H75mm
Total weight
approx. 30kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Workstation
- Special Order - Pricing Available Upon Request
Narishige's SN-3N is a middle size stereotaxic instrument for animals used in optical experiments. This model's fixing method employs a flexible U-frame (as an alternative to the solid U-frame featured on the SN-2N), which is suitable for middle size animals and enables the conduct of optical (visual) experiments. It uses a heavy base with a low center of gravity. To fix the zero point of head -- which is its basic axis -- in position, units for fixing three separate points are mounted on a U-frame.
The AP frame bar is 18.7mm square, and sufficiently long for the attachment of manipulators and various other accessories. The Uframe itself can be moved freely. Numerous screw holes are provided on the base frame to allow the attachment of different kinds of accessories or spinal cord fixing equipment. By changing the adaptors used at the three support points, it is possible to fix many kinds of animals.
Specification
Accessories
Stainless Basin, Bakelite (large) x 1, (small) x 1
Base dimensions
W780 x D292 x H75mm
Total weight
approx. 34kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instruments with Chamber Frame and Stereotaxic Micromanipulator (for Chronic Experiments on rats)
SR-10R:
$9,351.35
†
- Ships in 5-7 days
A new standard of stereotaxic instrument for chronic experiments on rats.
The SR-10R-HT is specifically designed for chronic experiments on rats. Fixation by the chamber frame permits repeated fixations in the same position in an unanesthetized state. Thereby chronic experiments as well as acute experiments can be smoothly done without causing damage to the animal. The SR-10R-HT can be used for visual and/or auditory experiments. The head holding device can be removed from the base plate so it can be placed under a microscope. An AP frame bar is provided, to which many different types of accessories can be attached like the micromanipulator SM-15 L/R.
By bonding the chamber frame onto the head of a rat, repeated fixations in the same position in an unanesthetized state have become possible. Once the chamber frame is fixed on the head, without the need for anesthetization, the rat can be stereotaxically fixed without using the mouth/nose clamp or ear bars, enabling the SR-10R to be used for visual and/or auditory experiments.
The stereotaxic micromanupulator SM-15 is included. For a version without the micromanipulator please visit SR-10R-HT.
This AP frame has an 18.7mm square shape since Narishige's stereotaxic manipulators are tailored for this standard.
Specification
Accessories
EB-3B Ear Bars for rats (in a pair) EB-5N Auxiliary Ear Bar for rats CF-10 Chamber Frame x 5pcs.
Dimension, Weight
W400 x D300 x H110mm, 9.2kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instruments with Chamber Frame (for Chronic Experiments on rats)
SR-10R-HT:
$6,864.86
†
- Ships in 5-7 days
A new standard of stereotaxic instrument for chronic experiments on rats.
The SR-10R-HT is specifically designed for chronic experiments on rats. Fixation by the chamber frame permits repeated fixations in the same position in an unanesthetized state. Thereby chronic experiments as well as acute experiments can be smoothly done without causing damage to the animal. The SR-10R-HT can be used for visual and/or auditory experiments. The head holding device can be removed from the base plate so it can be placed under a microscope. An AP frame bar is provided, to which many different types of accessories can be attached like the micromanipulator SM-15 L/R.
By bonding the chamber frame onto the head of a rat, repeated fixations in the same position in an unanesthetized state have become possible. Once the chamber frame is fixed on the head, without the need for anesthetization, the rat can be stereotaxically fixed without using the mouth/nose clamp or ear bars, enabling the SR-10R-HT to be used for visual and/or auditory experiments.
Setting Example
* The stereotaxic micromanupulator SM-15 is sold separately. For a version with the micromanipulator please visit SR-10R.
This AP frame has an 18.7mm square shape since Narishige's stereotaxic manipulators are tailored for this standard.
Specification
Accessories
EB-3B Ear Bars for rats (in a pair) EB-5N Auxiliary Ear Bar for rats CF-10 Chamber Frame x 5pcs.
Dimension, Weight
W400 x D300 x H110mm, 9.2kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Titlting Workstation for Mice
SR-50M-HT:
$5,708.11
†
- Special Order
Narishige's SR-50M-HT stereotaxic workstation provides for a tilting facility to enable approach from the sides. This stereotaxic instrument is developed for small animals, especially mice. For rats please consider SR-50R-HT.
The tilting facility makes it possible to approach from the sides for inspections of the auditory cortex, entorhinal cortex, ventral hippocampus and amygdala.
A rigid adjustable stand is used to enable tilting, and a fixing plate is mounted so that the animal does not fall.
Setting Example
*SM-15 sold separately. *For use with rats, please consider SR-50R-HT.
The SR-50M-HT comes equipped with an AP frame bar (18.7mm square) to mount attachments since Narishige's stereotaxic manipulators, like the SM-15 stereotaxic micromanipulator, are tailored for this standard.
Specification
Accessories included
EB-3B Auxiliary Bar for Mice EB-5NAuxiliary Ear Bar for Mice
Dimensions/Weight
W400 x D300 x H150mm. 10.4kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Titlting Workstation for Mice
SR-50R-HT:
$5,708.11
†
- Special Order
Narishige's SR-50R-HT stereotaxic workstation provides for a tilting facility to enable approach from the sides. This stereotaxic instrument is developed for small animals, especially rats. For mice please consider SR-50M-HT.
The tilting facility makes it possible to approach from the sides for inspections of the auditory cortex, entorhinal cortex, ventral hippocampus and amygdala.
A rigid adjustable stand is used to enable tilting, and a fixing plate is mounted so that the animal does not fall.
Setting Example
*SM-15 sold separately. *For use with mice, please consider SR-50M-HT.
The SR-50R-HT comes equipped with an AP frame bar (18.7mm square) to mount attachments since Narishige's stereotaxic manipulators, like the SM-15 stereotaxic micromanipulator, are tailored for this standard.
Specification
Accessories included
EB-3A Auxiliary Bar for Rats EB-4NAuxiliary Ear Bar for Rats
Dimensions/Weight
W400 x D300 x H150mm. 10.4kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered. Prices for Group-2 items change often, and, like all of our website prices are subject to change without notice, so always double-check with us prior to placing an order for this item.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instrument (for Common Marmosets) with Manipulator
SR-5C:
$6,702.70
†
- Ships in 1-5 days
Based on the time-proven SR series models, the SR-5C is a stereotaxic instrument intended for exclusive use with common marmosets and features many useful functions to hold the animal securely in place for stereotaxic procedures. The auxiliary ear bar particularly designed for the ears of common marmosets allows for the clamping in one hand, and also allows the fixation to the ear holes confirming the feel with the finger tips. Eyepits are held with the holders with cancellous surface which was also designed to minimize the damage to marmosets. By holding ear holes, eyepits and upper jaw, stereotaxic fixation is ensured. An 18.7mm AP frame bar is provided, to which many different types of accessories can be attached besides the attached micromanipulator SM-15.
The SR-5C has one AP frame bar, while the SR-6C has two. A version without the manipulator can be found here SR-5C-HT
Specifications
Accessories included
SM-15 Stereotaxic Micromanipulator EB-3AAuxiliary Ear Bar Allen Wrench
Dimensions/Weight
W400 × D300 × H110mm, 8.85kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instrument (for Common Marmosets)
SR-5C-HT:
$4,216.22
†
- Ships in 1-5 days
* When using these instruments with mice, use the separate MA-6N as well. * When using these instruments with rats, use the separate RA-6N as well.
Excellent operability for use exclusively with the common marmosets. Based on the time-proven SR series models, the SR-5C-HT is a stereotaxic instrument intended for exclusive use with common marmosets and features many useful functions to hold the animal securely in place for stereotaxic procedures. The auxiliary ear bar particularly designed for the ears of common marmosets allows for the clamping in one hand, and also allows the fixation to the ear holes confirming the feel with the finger tips. Eyepits are held with the holders with cancellous surface which was also designed to minimize the damage to marmosets. By holding ear holes, eyepits and upper jaw, stereotaxic fixation is ensured. An 18.7mm AP frame bar is provided, to which many different types of accessories can be attached like the micromanipulator SM-15.
The SR-5C-HT has one AP frame bar, while the SR-6C-HT has two. A version with the manipulator can be found here SR-5C
* The anesthetic mask (GM-3/GM-4) cannot be attached to this head holder.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instrument (for Mice) with Manipulator
SR-5M:
$5,729.73
†
- Ships in 5-7 days
Stereotaxic Instruments for Mice.
Narishige's SR-5M stereotaxic instruments are designed specifically for mice. The mouthpiece, nosepiece, and auxiliary ear bar are all well thought out for improved ease-of-use. The mouthpiece and nosepiece are made slimmer and smaller to fit with the tiny mouth of a mouse. The fore-and-aft and up-and-down adjustments of the mouthpiece/nosepiece have become more sensitive and functional, allowing smooth and quick setup by one-hand maneuvering. The improved auxiliary ear bar allows you to feel the delicate holding touch and the built-in spring permits one-hand maneuvering as well as simple one-touch locking. When not in use, the auxiliary ear bar can be disassembled for cleaning.Commonly used in conventional models, the 18.70mm AP frame bar permits the use of various accessories other than the supplied SM-15 stereotaxic micromanipulator.
A vesion without manipulator can be found here SR-5M-HT
Specification
Accessories
SM-15 Stereotaxic Micromanipulator EB-5N Auxiliary Mouse Ear Bar
Dimension, Weight
SR-5M: W400 x D300 x H110mm, 8.75kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instrument (for Mice)
SR-5M-HT:
$3,243.24
†
- Ships in 5-7 days
* When using these instruments with rats, use the separate RA-6N as well. * When using these instruments with common marmosets, use the separate CA-6 as well.
To fix the head of a mouse firmly with ease.
Narishige's SR-5M-HT stereotaxic instruments are designed specifically for mice. The mouthpiece, nosepiece, and auxiliary ear bar are all well thought out for improved ease-of-use. The mouthpiece and nosepiece are made slimmer and smaller to fit with the tiny mouth of a mouse. The fore-and-aft and up-and-down adjustments of the mouthpiece/nosepiece have become more sensitive and functional, allowing smooth and quick setup by one-hand maneuvering. The improved auxiliary ear bar allows you to feel the delicate holding touch and the built-in spring permits one-hand maneuvering as well as simple one-touch locking. When not in use, the auxiliary ear bar can be disassembled for cleaning. An 18.7mm AP frame bar is provided, to which many different types of accessories can be attached like the micromanipulator SM-15.
A version with the manipulator can be found here SR-5M
Setting Example
* Stereotaxic micromanipulators such as SM-15R/L is sold separately.
The AP frame has an 18.7mm square shape since Narishige's stereotaxic manipulators are tailored for this standard.
Specification
Accessories
EB-3B Ear Bars for Mice (in a pair) EB-5N Auxiliary Ear Bar for Mice
Dimension, Weight
W400 x D300 x H110mm, 8.75kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instrument (for Rats)
SR-5R-HT:
$3,243.24
†
- Ships in 1-5 days
* When using these instruments with mice, use the separate MA-6N as well. * When using these instruments with common marmosets, use the separate CA-6 as well.
Stereotaxic Instruments for fixing the head of a rat firmly with ease and accuracy.
SR-5R-HT stereotaxic instruments are designed specifically for rats. The mouthpiece, nosepiece, and auxiliary ear bar are all well thought out for improved ease-of-use. The mouthpiece and nosepiece are made to fit the mouth of a rat. The fore-and-aft and up-and-down adjustments of the mouthpiece/nosepiece have become more sensitive and functional, allowing smooth and quick setup by one-hand maneuvering. The improved auxiliary ear bar allows you to feel the delicate holding touch and the built-in spring permits one-hand maneuvering as well as simple one-touch locking.
When not in use, the auxiliary ear bar can be disassembled for cleaning. An 18.7mm AP frame bar is provided, to which many different types of accessories can be attached like the micromanipulator SM-15.
A version with the manipulator can be found here SR-5R
Setting Example
* Stereotaxic micromanipulators such as SM-15R is sold separately.
The AP frame has an 18.7mm square shape since Narishige's stereotaxic manipulators are tailored for this standard.
Specification
Accessories
EB-3BEar Bars for Mice (in a pair) EB-5N Auxiliary Ear Bar for Mice
Dimension, Weight
W400 x D300 x H110mm, 8.75kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instrument (for Common Marmosets) with manipulator
SR-6C:
$7,437.84
†
- Ships in 5-7 days
Based on the time-proven SR series models, the SR-6C is a stereotaxic instrument intended for exclusive use with common marmosets and features many useful functions to hold the animal securely in place for stereotaxic procedures. The auxiliary ear bar particularly designed for the ears of common marmosets allows for the clamping in one hand, and also allows the fixation to the ear holes confirming the feel with the finger tips. Eyepits are held with the holders with cancellous surface which was also designed to minimize the damage to marmosets. By holding ear holes, eyepits and upper jaw, stereotaxic fixation is ensured. An 18.7mm AP frame bar is provided, to which many different types of accessories can be attached besides the attached micromanipulator SM-15.
The SR-5C has one AP frame bar, while the SR-6C has two.
For a version without the Micromanipulator please visit SR-6C-HT.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instrument (for Common Marmosets)
SR-6C-HT:
$4,951.35
†
- Ships in 5-7 days
Based on the time-proven SR series models, the SR-6C is a stereotaxic instrument intended for exclusive use with common marmosets and features many useful functions to hold the animal securely in place for stereotaxic procedures. It comes with 2 AP frame bars. The auxiliary ear bar particularly designed for the ears of common marmosets allows for the clamping in one hand, and also allows the fixation to the ear holes confirming the feel with the finger tips. Eyepits are held with the holders with cancellous surface which was also designed to minimize the damage to marmosets. By holding ear holes, eyepits and upper jaw, stereotaxic fixation is ensured. An 18.7mm AP frame bar is provided, to which many different types of accessories can be attached besides the stereotaxic micromanipulator SM-15. The version SR-6C includes the micromanipulator.
The SR-5C-HT has one AP frame bar, while the SR-6C-HT has two. This AP frame has an 18.7mm square shape since Narishige's stereotaxic manipulators are tailored for this standard.
Specifications
Accessories included
EB-3A Ear Bars Dedicated Auxiliary Ear Bar Hex Wrench
Dimensions/Weight
W400 × D300 × H110mm, 9.3kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instrument (for Mice) with Micromanipulator
SR-6M:
$6,486.49
†
- Ships in 1-5 days
Stereotaxic Instrument specially designed for mice, fixing the head firmly.
SR-6M stereotaxic instruments are designed specifically for mice. The mouthpiece, nosepiece, and auxiliary ear bar are all well thought out for improved ease-of-use. The mouthpiece and nosepiece are made slimmer and smaller to fit with the tiny mouth of a mouse. The fore-and-aft and up-and-down adjustments of the mouthpiece/nosepiece have become more sensitive and functional, allowing smooth and quick setup by one-hand maneuvering. The improved auxiliary ear bar allows you to feel the delicate holding touch and the built-in spring permits one-hand maneuvering as well as simple one-touch locking. When not in use, the auxiliary ear bar can be disassembled for cleaning.
An 18.7mm AP frame bar is provided, to which many different types of accessories can be attached besides the attached stereotaxic micromanipulator SM-15. For a version without the micromanipulator please visit SR-6M-HT.
The SR-5M has one AP frame bar, while the SR-6M has two. This AP frame has an 18.7mm square shape since Narishige's stereotaxic manipulators are tailored for this standard.
Specification
Accessories
SM-15 R/L Stereotaxic Micromanipulator EB-3B Ear bars for Mice (in a pair) EB-5 Auxiliary Mouse Ear Bar
Dimension, Weight
SR-6M: W400 x D300 x H110mm, 9.2kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instrument (for Mice) with Micromanipulator
SR-6M-HT:
$4,000.00
†
- Ships in 1-5 days
Stereotaxic Instrument specially designed for mice, fixing the head firmly.
SR-6M stereotaxic instruments are designed specifically for mice. The mouthpiece, nosepiece, and auxiliary ear bar are all well thought out for improved ease-of-use. The mouthpiece and nosepiece are made slimmer and smaller to fit with the tiny mouth of a mouse. The fore-and-aft and up-and-down adjustments of the mouthpiece/nosepiece have become more sensitive and functional, allowing smooth and quick setup by one-hand maneuvering. The improved auxiliary ear bar allows you to feel the delicate holding touch and the built-in spring permits one-hand maneuvering as well as simple one-touch locking. When not in use, the auxiliary ear bar can be disassembled for cleaning.
An 18.7mm AP frame bar is provided, to which many different types of accessories can be attached like the stereotaxic micromanipulator SM-15.
The SR-5M-HT has one AP frame bar, while the SR-6M-HT has two.
Setting Example
* The stereotaxic micromanupulator SM-15 is sold separately. For a version with the micromanipulator please visit SR-6M.
This AP frame has an 18.7mm square shape since Narishige's stereotaxic manipulators are tailored for this standard.
Specification
Accessories
EB-3B Ear bars for Mice (in a pair) EB-5 Auxiliary Mouse Ear Bar
Dimension, Weight
W400 x D300 x H110mm, 9.2kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instrument (for Rats) with Micromanipulator
SR-6R:
$6,486.49
†
- Ships in 1-5 days
Stereotaxic Instruments for Rats.
Narishige's SR-6R stereotaxic instruments are designed specifically for rats. The mouthpiece, nosepiece, and auxiliary ear bar are all well thought out for improved ease-of-use. The mouthpiece and nosepiece are made to fit the mouth of a rat. The fore-and-aft and up-and-down adjustments of the mouthpiece/nosepiece have become more sensitive and functional, allowing smooth and quick setup by one-hand maneuvering.
The improved auxiliary ear bar allows you to feel the delicate holding touch and the built-in spring permits one-hand maneuvering as well as simple one-touch locking. When not in use, the auxiliary ear bar can be disassembled for cleaning.Commonly used in conventional models, the 18.70mm AP frame bar permits the use of various accessories other than the supplied SM-15 stereotaxic micromanipulator.
For a version without the stereotaxic micromanipulator please go here SR-6R-HT.
Specification
Accessories
SM-15 Stereotaxic Micromanipulator
Dimension, Weight
SR-6R: W400 x D300 x H110mm, 9.2kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instrument (for Rats)
SR-6R-HT:
$4,000.00
†
- Ships in 1-5 days
Stereotaxic Instrument specially designed for rats, fixing the head firmly.
SR-6R stereotaxic instruments are designed specifically for rats. The mouthpiece, nosepiece, and auxiliary ear bar are all well thought out for improved ease-of-use. The mouthpiece and nosepiece are made slimmer and smaller to fit with the tiny mouth of a rat. The fore-and-aft and up-and-down adjustments of the mouthpiece/nosepiece have become more sensitive and functional, allowing smooth and quick setup by one-hand maneuvering. The improved auxiliary ear bar allows you to feel the delicate holding touch and the built-in spring permits one-hand maneuvering as well as simple one-touch locking. When not in use, the auxiliary ear bar can be disassembled for cleaning.
An 18.7mm AP frame bar is provided, to which many different types of accessories can be attached like the stereotaxic micromanipulator SM-15.
The SR-5M-HT has one AP frame bar, while the SR-6R-HT has two.
Setting Example
* The stereotaxic micromanupulator SM-15 is sold separately. For a version with the micromanipulator please visit SR-6R.
This AP frame has an 18.7mm square shape since Narishige's stereotaxic manipulators are tailored for this standard.
Specification
Accessories
EB-3B Ear Bars for Mice (in a pair) EB-5N Auxiliary Ear Bar for Mice
Dimension, Weight
W400 x D300 x H110mm, 9.2kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Semi-chronic Head Holder
SR-8N:
$7,459.46
†
- Special Order
Narishige's SR-8N head holder is designed for chronic and repeated experiments. This is an upgraded version of the compact, stable stereotaxic instrument SR-6N developed for small animals, and can be used for chronic experiments.
Use of the guide pipe, which passes between the skull and the scalp, enables repeated fixations in the same position without using anesthesia. This allows both acute and chronic experiments to be performed without pain or damage to the animals.
Since no anaesthesia is required, both visual and aural experiments can also be undertaken. For the AP frame bar, to which manipulators are fixed, a long 18.7mm square bar is provided on either the right or the left side, enabling attachment of the SM-15 and many other kinds of accessories.
SM-15 Stereotaxic Micromanipulator, EB-4 Auxiliary Rat Ear Bar, Head Holder Pipe x 10
Base dimensions
W400 x D300 x H110mm
Total weight
9.55kg
*This is a Narishige "Group-2" special order item. Because it has to be custom-made for you, there is usually a 4-week lead time and it is non-cancellable and non-returnable once ordered.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instruments (for Chronic Experiments on Mice) with Chamber Frame and Micromanipulator
SR-9M:
$8,864.86
†
- Ships in 5-7 days
A new standard of stereotaxic instrument for chronic experiments on mice.
The SR-9M is specifically designed for chronic experiments on mice. Fixation by the chamber frame permits repeated fixations in the same position in an unanesthetized state. Thereby chronic experiments as well as acute experiments can be smoothly done without causing damage to the animal. The SR-9M can be used for visual and/or auditory experiments. The head holding device can be removed from the base plate so it can be placed under a microscope. An AP frame bar is provided, to which many different types of accessories can be attached like the micromanipulator SM-15 L/R.
By bonding the chamber frame onto the head of a mouse, repeated fixations in the same position in an unanesthetized state have become possible. Once the chamber frame is fixed on the head, without the need for anesthetization, the mouse can be stereotaxically fixed without using the mouth/nose clamp or ear bars, enabling the SR-9M to be used for visual and/or auditory experiments.
For a version without the stereotaxic micromanupulator SM-15 please visit SR-9M-HT.
This AP frame has an 18.7mm square shape since Narishige's stereotaxic manipulators are tailored for this standard.
Specification
Accessories
SM-15 R/L Stereotaxic Micromanipulator EB-3B Ear Bars for Mice (in a pair) EB-5N Auxiliary Ear Bar for Mice CF-10 Chamber Frame x 5pcs.
Dimension, Weight
W400 x D300 x H110mm, 9.2kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instruments (for Chronic Experiments on Mice) with Chamber Frame
SR-9M-HT:
$6,378.38
†
- Ships in 5-7 days
A new standard of stereotaxic instrument for chronic experiments on mice.
The SR-9M-HT is specifically designed for chronic experiments on mice. Fixation by the chamber frame permits repeated fixations in the same position in an unanesthetized state. Thereby chronic experiments as well as acute experiments can be smoothly done without causing damage to the animal. The SR-9M-HT can be used for visual and/or auditory experiments. The head holding device can be removed from the base plate so it can be placed under a microscope. An AP frame bar is provided, to which many different types of accessories can be attached like the micromanipulator SM-15 L/R.
By bonding the chamber frame onto the head of a mouse, repeated fixations in the same position in an unanesthetized state have become possible. Once the chamber frame is fixed on the head, without the need for anesthetization, the mouse can be stereotaxically fixed without using the mouth/nose clamp or ear bars, enabling the SR-9M-HT to be used for visual and/or auditory experiments.
Setting Example
* The stereotaxic micromanupulator SM-15 is sold separately. For a version with the micromanipulator please visit SR-9M.
This AP frame has an 18.7mm square shape since Narishige's stereotaxic manipulators are tailored for this standard.
Specification
Accessories
EB-3B Ear Bars for Mice (in a pair) EB-5N Auxiliary Ear Bar for Mice CF-10 Chamber Frame x 5pcs.
Dimension, Weight
W400 x D300 x H110mm, 9.2kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instrument (for Mice/MRI-compatible) with Micromanipulator
SRP-5M:
$6,918.92
†
- Ships in 5-7 days
*older version in this photograph. for a more recent image visit SRP-5M-HT2 version without the micromanipulator
MRI-ready Stereotaxic Instrument
While the head holding assembly is made of 100% plastic, both the AP frame bar and the base plate are made of metal. Therefore, these MRI-ready stereotaxic instruments ensure stable and accurate stereotaxic recording. The head holding assembly can be readily detached from the base plate to permit MRI scanning with the animal held in place. After MRI scanning, the head holding assembly can be easily put back on the base plate in the original position with the animal being held in place.
These stereotaxic instruments are capable of serving diverse applications simply by replacing the head holding assembly intended for small animals (rats/mice). Incorporating the device for injecting a marker or contrast agent required for MRI scanning, the head holding assembly permits stereotaxic recording with the MRI scanning point aligned with the animal.
This AP frame has an 18.7mm square shape since Narishige's stereotaxic manipulators are tailored for this standard.
like the supplied SM-15 stereotaxic micromanipulator. For a version without the micromanipulator go to SRP-5M-HT2. The difference between SRP-5M and SRP-6M lies in the number of AP frame bars. SRP-5 comes equipped with one AP frame bar, while SRP-6 comes with two AP frame bars.
* The anesthetic mask GM-4 cannot be attached to this head holder.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instrument (for Mice/MRI-compatible)
SRP-5M-HT2:
$5,459.46
†
- Ships in 5-7 days
*Stereotaxic Manipulator SM-15 sold separately or for a version with the micromanipulator go to SRP-5M
MRI-ready Stereotaxic Instrument
While the head holding assembly is made of 100% plastic, both the AP frame bar and the base plate are made of metal. Therefore, these MRI-ready stereotaxic instruments ensure stable and accurate stereotaxic recording. The head holding assembly can be readily detached from the base plate to permit MRI scanning with the animal held in place. After MRI scanning, the head holding assembly can be easily put back on the base plate in the original position with the animal being held in place.
These stereotaxic instruments are capable of serving diverse applications simply by replacing the head holding assembly intended for small animals (rats/mice). Incorporating the device for injecting a marker or contrast agent required for MRI scanning, the head holding assembly permits stereotaxic recording with the MRI scanning point aligned with the animal.
This AP frame has an 18.7mm square shape since Narishige's stereotaxic manipulators are tailored for this standard.
The difference between SRP-5M-HT2 and SRP-6M-HT2 lies in the number of AP frame bars. The SRP-5 series come equipped with one AP frame bar, while SRP-6 series products come with two AP frame bars.
* The anesthetic mask GM-4 cannot be attached to this head holder.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instrument (for Rats/MRI-compatible) with Micromanipulator
SRP-5R:
$7,675.68
†
- Ships in 5-7 days
*older version in this photograph. for a more recent image visit SRP-5M-HT2 version without the micromanipulator
MRI-ready Stereotaxic Instrument
While the head holding assembly is made of 100% plastic, both the AP frame bar and the base plate are made of metal. Therefore, these MRI-ready stereotaxic instruments ensure stable and accurate stereotaxic recording. The head holding assembly can be readily detached from the base plate to permit MRI scanning with the animal held in place. After MRI scanning, the head holding assembly can be easily put back on the base plate in the original position with the animal being held in place.
These stereotaxic instruments are capable of serving diverse applications simply by replacing the head holding assembly intended for rats. Incorporating the device for injecting a marker or contrast agent required for MRI scanning, the head holding assembly permits stereotaxic recording with the MRI scanning point aligned with the animal.
This AP frame has an 18.7mm square shape since Narishige's stereotaxic manipulators are tailored for this standard.
like the supplied SM-15 stereotaxic micromanipulator. For a version without the micromanipulator go to SRP-5R-HT2. The difference between SRP-5R and SRP-6R lies in the number of AP frame bars. SRP-5 comes equipped with one AP frame bar, while SRP-6 comes with two AP frame bars.
* The anesthetic mask GM-3 cannot be attached to this head holder.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instrument (for Rats/MRI-compatible)
SRP-5R-HT2:
$5,459.46
†
- Ships in 5-7 days
*Stereotaxic Manipulator SM-15 sold separately or for a version with the micromanipulator go to SRP-5R
MRI-ready Stereotaxic Instrument
While the head holding assembly is made of 100% plastic, both the AP frame bar and the base plate are made of metal. Therefore, these MRI-ready stereotaxic instruments ensure stable and accurate stereotaxic recording. The head holding assembly can be readily detached from the base plate to permit MRI scanning with the animal held in place. After MRI scanning, the head holding assembly can be easily put back on the base plate in the original position with the animal being held in place.
These stereotaxic instruments are capable of serving diverse applications simply by replacing the head holding assembly intended for rats. Incorporating the device for injecting a marker or contrast agent required for MRI scanning, the head holding assembly permits stereotaxic recording with the MRI scanning point aligned with the animal.
This AP frame has an 18.7mm square shape since Narishige's stereotaxic manipulators are tailored for this standard.
The difference between SRP-5R-HT2 and SRP-6R-HT2 lies in the number of AP frame bars. SRP-5 series come equipped with one AP frame bar, while SRP-6 series products come with two AP frame bars.
* The anesthetic mask GM-3 cannot be attached to this head holder.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instrument (for mice/MRI) with two AP frame bars and Micromanipulator
SRP-6M:
$6,918.92
†
- Ships in 5-7 days
*older version in this photograph. for a more recent image visit SRP-6M-HT2 version without the micromanipulator
MRI-ready Stereotaxic Instrument
While the head holding assembly is made of 100% plastic, both the AP frame bar and the base plate are made of metal. Therefore, these MRI-ready stereotaxic instruments ensure stable and accurate stereotaxic recording. The head holding assembly can be readily detached from the base plate to permit MRI scanning with the animal held in place. After MRI scanning, the head holding assembly can be easily put back on the base plate in the original position with the animal being held in place.
These stereotaxic instruments are capable of serving diverse applications simply by replacing the head holding assembly intended for mice. Incorporating the device for injecting a marker or contrast agent required for MRI scanning, the head holding assembly permits stereotaxic recording with the MRI scanning point aligned with the animal.
This AP frame has an 18.7mm square shape since Narishige's stereotaxic manipulators are tailored for this standard.
like the supplied SM-15 stereotaxic micromanipulator. For a version without the micromanipulator go to SRP-6M-HT2. The difference between SRP-5M and SRP-6M lies in the number of AP frame bars. SRP-5 comes equipped with one AP frame bar, while SRP-6 comes with two AP frame bars.
* The anesthetic mask GM-4 cannot be attached to this head holder.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instrument (for mice/MRI) with two AP frame bars
SRP-6M-HT2:
$6,270.27
†
- Ships in 5-7 days
*Stereotaxic Manipulator SM-15 sold separately or for a version with the micromanipulator go to SRP-6M
MRI-ready Stereotaxic Instrument
While the head holding assembly is made of 100% plastic, both the AP frame bar and the base plate are made of metal. Therefore, these MRI-ready stereotaxic instruments ensure stable and accurate stereotaxic recording. The head holding assembly can be readily detached from the base plate to permit MRI scanning with the animal held in place. After MRI scanning, the head holding assembly can be easily put back on the base plate in the original position with the animal being held in place.
These stereotaxic instruments are capable of serving diverse applications simply by replacing the head holding assembly intended for mice. Incorporating the device for injecting a marker or contrast agent required for MRI scanning, the head holding assembly permits stereotaxic recording with the MRI scanning point aligned with the animal.
This AP frame has an 18.7mm square shape since Narishige's stereotaxic manipulators are tailored for this standard.
The difference between SRP-5M-HT2 and SRP-6M-HT2 lies in the number of AP frame bars. SRP-5 series come equipped with one AP frame bar, while SRP-6 series products come with two AP frame bars.
* The anesthetic mask GM-4 cannot be attached to this head holder.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instrument (for rats/MRI) with two AP frame bars and Micromanipulator
SRP-6R:
$7,675.68
†
- Ships in 5-7 days
*older version in this photograph. for a more recent image visit SRP-6M-HT2 version without the micromanipulator
MRI-ready Stereotaxic Instrument
While the head holding assembly is made of 100% plastic, both the AP frame bar and the base plate are made of metal. Therefore, these MRI-ready stereotaxic instruments ensure stable and accurate stereotaxic recording. The head holding assembly can be readily detached from the base plate to permit MRI scanning with the animal held in place. After MRI scanning, the head holding assembly can be easily put back on the base plate in the original position with the animal being held in place.
These stereotaxic instruments are capable of serving diverse applications simply by replacing the head holding assembly intended for rats. Incorporating the device for injecting a marker or contrast agent required for MRI scanning, the head holding assembly permits stereotaxic recording with the MRI scanning point aligned with the animal.
This AP frame has an 18.7mm square shape since Narishige's stereotaxic manipulators are tailored for this standard.
like the supplied SM-15 stereotaxic micromanipulator. For a version without the micromanipulator go to SRP-6R-HT2. The difference between SRP-5R and SRP-6R lies in the number of AP frame bars. SRP-5 comes equipped with one AP frame bar, while SRP-6 comes with two AP frame bars.
* The anesthetic mask GM-3 cannot be attached to this head holder.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instrument (for rats/MRI) with two AP frame bars
SRP-6R-HT2:
$6,270.27
†
- Ships in 5-7 days
*Stereotaxic Manipulator SM-15 sold separately or for a version with the micromanipulator go to SRP-6R
MRI-ready Stereotaxic Instrument
While the head holding assembly is made of 100% plastic, both the AP frame bar and the base plate are made of metal. Therefore, these MRI-ready stereotaxic instruments ensure stable and accurate stereotaxic recording. The head holding assembly can be readily detached from the base plate to permit MRI scanning with the animal held in place. After MRI scanning, the head holding assembly can be easily put back on the base plate in the original position with the animal being held in place.
These stereotaxic instruments are capable of serving diverse applications simply by replacing the head holding assembly intended for rats. Incorporating the device for injecting a marker or contrast agent required for MRI scanning, the head holding assembly permits stereotaxic recording with the MRI scanning point aligned with the animal.
This AP frame has an 18.7mm square shape since Narishige's stereotaxic manipulators are tailored for this standard.
The difference between SRP-5R-HT2 and SRP-6R-HT2 lies in the number of AP frame bars. SRP-5 series come equipped with one AP frame bar, while SRP-6 series products come with two AP frame bars.
* The anesthetic mask GM-3 cannot be attached to this head holder.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Head Holder for Mice (for MRI)
SRP-AM2:
$3,891.89
†
- Special Order
Head holder for mice with MRI measurement compatibility.
Narishige's SRP-AM2 MRI measurement-compatible head holder is now more precise and stronger than the previous version and can be attached to SR series fixing devices, ensuring extremely stable fixation of the head. When the instrument is detached for MRI measurement, 100% of the instrument becomes plastic to make the procedure easier. Markers can be inserted into the mechanism so that operators can perform MRI measurements simply by aligning measurement points to the object. Once MRI measurements are completed, the instrument can easily revert to its function as an affixing instrument, while keeping the animals positioned. Two sizes are available: SRP-AM2 for mice, and SRP-AR2 for rats.
* The anesthetic mask GM-4 cannot be attached to this head holder
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Head Holder for Rats (for MRI measurement)
SRP-AR2:
$3,891.89
†
- Special Order
Head holder for rats, with MRI measurement compatibility.
Narishige's SRP-AR2 MRI measurement-compatible head holder is now more precise and stronger than its previous version and can be attached to SR series affixing devices. Such attachment ensures stable securement of the head. When the instrument is detached for MRI measurement, 100% of the instrument becomes plastic to make the procedure easier. Markers can be inserted into the mechanism so that operators can perform MRI measurements simply by aligning measurement points to the object. Once MRI measurements are completed, the instrument can easily revert to its function as an affixing instrument while keeping the animals in position. Two types are available: SRP-AR for rats, and SRP-AM2 for mice.
* The anesthetic mask GM-3 cannot be attached to this head holder.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Small Animal Stereotaxic Workstation (With Single AP Frame Bar) with Micromanipulator
SRS-5:
$7,135.14
†
- Ships in 5-7 days
*For a version without micromanipulator please visit SRS-5-HT
The Model SRS-5 has been developed for work with knockout mice, newborn rats, small-sized rats, etc. It is configured so as to hold the tiny head of a small mouse or rat in position with its head clamp unit (mouthpiece and nosepiece) and auxiliary ear bars provided with fine adjustment functions. The SRS-5 comes equipped with one AP frame bar (18.7mm square) to mount the supplied Narishige stereotaxic micromanipulator SM-15. If you like a model with two frame bars then refer to SRS-6. For a version without micromanipulator please visit SRS-5-HT. The point of an auxiliary ear bar is available in varying sizes and easy to replace according to the intended use (e.g. to avoid the rupture of tympanic membrane or to fix the ears securely).
* The anesthetic mask GM-3/GM-4 cannot be attached to this head holder. *For use with mice, please specify when ordering.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Small Animal Stereotaxic Workstation (With Single AP Frame Bar)
SRS-5-HT:
$4,648.65
†
- Ships in 5-7 days
* For mice/newborn rats with completely developed ear canal. *For a version with micromanipulator please visit SRS-5
The Model SRS-5-HT has been developed for work with knockout mice, newborn rats, small-sized rats, etc. It is configured so as to hold the tiny head of a small mouse or rat in position with its head clamp unit (mouthpiece and nosepiece) and auxiliary ear bars provided with fine adjustment functions.
Setting Example
* The stereotaxic micromanupulator SM-15 is sold separately. For a version with the micromanipulator please visit SRS-5.
This workstation comes with one 18.7mm square shape AP framebar (if you like a model with two frame bars then refer to SRS-6-HT) since Narishige's stereotaxic manipulators are tailored for this standard.
The point of an auxiliary ear bar is available in varying sizes and easy to replace according to the intended use (e.g. to avoid the rupture of tympanic membrane or to fix the ears securely).
Specification
Accessories included
Dedicated Auxiliary Ear Bars Hex Wrench
Dimensions
W400 x D300 x H110mm
Total weight
8.75kg
* The anesthetic mask GM-3/GM-4 cannot be attached to this head holder. *For use with mice, please specify when ordering.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Small Animal Stereotaxic Workstation (With Double AP Frame Bar) with micromanipulator SM-15
SRS-6:
$7,891.89
†
- Ships in 5-7 days
* For mice/newborn rats with completely developed ear canal. For a version without Micromanipulator go to SRS-6-HT
While the Model SRS-5 has one AP frame bar, the Model SRS-6 comes equipped with two AP frame bars allowing manipulators to be mounted on each side. The SRS-6 has been developed for work with knockout mice or small-sized rats. It is configured so as to hold the tiny head of a small mouse or rat in position with its head clamp unit (mouthpiece and nosepiece) and auxiliary ear bars provided with fine adjustment functions.
The SRS-6 comes equipped with an AP frame bar (18.7mm square) on each side to allow a separately available Narishige stereotaxic micromanipulator to be mounted on each side. The point of an auxiliary ear bar is available in varying sizes and easy to replace according to the intended use (e.g. to avoid the rupture of tympanic membrane or to fix the ears securely).
* The anesthetic mask GM-3/GM-4 cannot be attached to this head holder. *For use with mice, please specify when ordering.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Small Animal Stereotaxic Workstation (With Double AP Frame Bar)
SRS-6-HT:
$5,405.41
†
- Ships in 5-7 days
* For mice/newborn rats with completely developed ear canal. *For a version with micromanipulator please visit SRS-6
While the Model SRS-5-HT has one AP frame bar, the Model SRS-6-HT comes equipped with two AP frame bars allowing manipulators to be mounted on each side. The Model SRS-6-HT has been developed for work with knockout mice, newborn rats, small-sized rats, etc. It is configured so as to hold the tiny head of a small mouse or rat in position with its head clamp unit (mouthpiece and nosepiece) and auxiliary ear bars provided with fine adjustment functions.
Setting Example
* The stereotaxic micromanupulator SM-15 is sold separately. For a version with the micromanipulator please visit SRS-6.
This workstation comes with two 18.7mm square shape AP framebars since Narishige's stereotaxic manipulators are tailored for this standard. If you like a model with one frame bar then refer to SRS-5-HT.
The point of an auxiliary ear bar is available in varying sizes and easy to replace according to the intended use (e.g. to avoid the rupture of tympanic membrane or to fix the ears securely).
Specification
Accessories included
Dedicated Auxiliary Ear Bars Hex Wrench
Dimensions
W400 x D300 x H110mm
Total weight
8.75kg
* The anesthetic mask GM-3/GM-4 cannot be attached to this head holder. *For use with mice, please specify when ordering.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Compact Head Holding Device
SRS-A:
$3,621.62
†
- Ships in 1-5 days
Narishige's SRS-A is a head holding device that can be attached to the SR series, and is suitable for newborn rats or mice. As required for small heads, the instrument allows fine adjustment in many places of the head (mouth and nose) fixing section, and the auxiliary ear bar. This lets the operator examine the fixing state and feel whether or not it is correct with the fingertips. The tip of the ear bar can be made according to the user's purpose (firm fixation, or for experiments in which ear drum damage must be avoided). Please consult us with your particular requirement.
Specifications
Dimensions
W300 x D120 x H77mm
Total Weight
2.1kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instrument with Spinal Cord Clamps for mice and with Micromanipulator
ST-7M:
$9,729.73
†
- Ships in 5-7 days
Narishige's ST-7 is a versatile stereotaxic instrument for small animals. This compact and stable stereotaxic instrument has been developed for work with small animals, especially mice. An auxiliary ear bar is incorporated for secure fixation of mice ears.
Experiments on the brain and spinal cord can be performed simultaneously. This instrument also offers a removable center plate for such tasks as fixing a cat spinal cord.
The AP frame bar, to which manipulators are fixed, has Narishioge's standard 18.7mm square bar , enabling attachment of the included SM-15 and many other kinds of accessories.
For a version without the micromanipulator please visit ST-7M-HT.
SM-15 Stereotaxic Micromanipulator, EB-3B Ear Bars for Mice (in a pair) EB-5N Auxiliary Ear Bars for Mice Connecting Rings Screws Hex Wrench
Base dimensions
W400 x D300 x H180mm
Base weight
7.4kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instrument with Spinal Cord Clamps for mice
ST-7M-HT:
$7,243.24
†
- Ships in 5-7 days
Narishige's ST-7 is a versatile stereotaxic instrument for small animals. This compact and stable stereotaxic instrument has been developed for work with small animals, especially mice. An auxiliary ear bar is incorporated for secure fixation of mice ears.
Experiments on the brain and spinal cord can be performed simultaneously. This instrument also offers a removable center plate for such tasks as fixing a cat spinal cord.
Setting Example
The AP frame bar, to which manipulators are fixed, has Narishige's standard 18.7mm square bar , enabling attachments like the SM-15 stereotaxic micromanipulator and many other kinds of accessories.
For a version including the micromanipulator please visit ST-7M.
EB-3B Ear Bars for mice (in a pair) EB-5N Auxiliary Ear Bars for mice Connecting Rings Screws Hex Wrench
Base dimensions
W400 x D300 x H180mm
Base weight
7.4kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instrument with Spinal Cord Clamps for rats
ST-7R-HT:
$7,891.89
†
- Ships in 5-7 days
Narishige's ST-7 is a versatile stereotaxic instrument for small animals. This compact and stable stereotaxic instrument has been developed for work with small animals, especially rats. An auxiliary ear bar is incorporated for secure fixation of rats ears.
Experiments on the brain and spinal cord can be performed simultaneously. This instrument also offers a removable center plate for such tasks as fixing a cat spinal cord.
Setting Example
The AP frame bar, to which manipulators are fixed, has Narishige's standard 18.7mm square bar , enabling attachments like the SM-15 stereotaxic micromanipulator and many other kinds of accessories.
For a version including the micromanipulator please visit ST-7R.
EB-3B Ear Bars for Rats (in a pair) EB-4N Auxiliary Ear Bars for Rats Connecting Rings Screws Hex Wrench
Base dimensions
W400 x D300 x H180mm
Base weight
7.4kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instrument outfitted with Compact Spinal Cord Clamping Device for mice/newborn rats with Micromanipulator
STS-7:
$11,135.14
†
- Ships in 5-7 days
* For mice/newborn rats with completely developed ear canal.
The Model STS-7 has been developed to clamp the spinal cord of a knockout mouse or newborn rat, which has been previously difficult. Its spinal cord clamping device allows you to feel the clamping touch on the tips of your fingers and thus prevents damage to the spinal cord. Incorporating fine adjustment technologies used primarily for micromanipulators, it permits accurate positioning toward a target point.
The STS-7 is configured so as to hold the tiny head of a small mouse or rat in position with its head clamp unit (mouthpiece and nosepiece) and auxiliary ear bars provided with fine adjustment functions. The point of an auxiliary ear bar is available in varying sizes and easy to replace according to the intended use (e.g. to avoid the rupture of tympanic membrane or to fix the ears securely).
The STS-7 comes equipped with an AP frame bar (18.7mm square) to mount attachments since Narishige's stereotaxic manipulator, like the SM-15Narishige stereotaxic micromanipulator, are tailored for this standard.
For a version without the micromanipulator please visit STS-7-HT.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Stereotaxic Instrument outfitted with Compact Spinal Cord Clamping Device for mice/newborn rats
STS-7-HT:
$8,648.65
†
- Ships in 5-7 days
* For mice/newborn rats with completely developed ear canal.
The Model STS-7-HT has been developed to clamp the spinal cord of a knockout mouse or newborn rat, which has been previously difficult. Its spinal cord clamping device allows you to feel the clamping touch on the tips of your fingers and thus prevents damage to the spinal cord. Incorporating fine adjustment technologies used primarily for micro-manipulators, it permits accurate positioning toward a target point.
The STS-7-HT is configured so as to hold the tiny head of a small mouse or rat in position with its head clamp unit (mouthpiece and nosepiece) and auxiliary ear bars provided with fine adjustment functions. The point of an auxiliary ear bar is available in varying sizes and easy to replace according to the intended use (e.g. to avoid the rupture of tympanic membrane or to fix the ears securely).
The STS-7-HT comes equipped with an AP frame bar (18.7mm square) to mount attachments since Narishige's stereotaxic manipulator, like the SM-15Narishige stereotaxic micromanipulator, are tailored for this standard.
For a version including the micromanipulator please visit STS-7
Setting Example
Specifications
Accessories included
Dedicated Auxiliary Ear Bar Connecting Rings Screws Hex Wrench
Dimensions
(Base plate):W400 x D300 x H110mm, 9.6kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Compact Spinal Cord Clamps
STS-A:
$4,270.27
†
- Ships in 1-5 days
Narishige's STS-A compact spinal cord clamps are used in conjunction with SR series stereotaxic instruments. To ensure that the fragile spinal cord of a mouse or newborn rat is clamped securely and correctly, this model is designed so that tactile information from the clamp is communicated to the operator's hand.
The left side 2 spinal clamps have rounded edges to fit with the spinal cord, while the right side clamp has saw-tooth edges, which permits flexible use depending on the use and location. Each moving part employs a manipulator-derived dovetail mechanism that ensures smooth movement without play or looseness. The simple one-touch locking system also helps to ensure secure fixation without looseness.
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Spinal Cord Clamps for Rats
STS-B:
$4,918.92
†
- Ships in 1-5 days
Narishige's STS-B, used with SR series stereotaxic instruments, is designed to facilitate manual manipulation of spinal cord clamps in order to safely and gently clamp the rat spinal cord.
Specification
Accessories included
Connecting rings Screws Allen wrench
Dimensions/Weight
W205 × D140 × H95 - 125mm, 1.18kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Water Hydraulic Micromanipulators
Three-Axis Water Hydraulic Fine Micromanipulator (1:1 System)
MHW-103:
$6,486.49
†
- Ships in 1-5 days
Narishige's MHW-103 is a liquid hydraulic micromanipulators developed for patch clamping generally use the 1:5 cartridge system to solve the problem of drifting. It has a wide driving range while keeping drift to a minimum. Since this can limit their driving range to as little as 2mm, customers who want a wide driving range are recommended to choose this product, which uses a 1:1 cartridge. The drum type control unit has a large handle for precise operation and high linear repeatability. The water hydraulic system is less prone to drift caused by changes in temperature than an oil hydraulic system, and is thus more suitable for patch clamping. A coarse manipulator is not mounted, so one must be purchased separately.
*For attachment to the microscope, a coarse manipulator and suitable adaptor are required (sold separately). *Select Type B adaptor for mounting this manipulator in combination with MMN-1 coarse manipulator.
X10mm, Y10mm, Z10mm Full rotation of knob 250µm Minimum graduation 1µm
Dimensions/Weight
Control unit
W115 × D115 × H132mm, 1.6kg
Drive unit
W70 × D50 × H80mm, 150g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Water Hydraulic Fine Micromanipulator
MHW-3:
$7,945.95
†
- Ships in 1-5 days
Narishige's MHW-3 is a water hydraulic micromanipulator specially designed for patch clamping. Its water hydraulic system has a lower coefficient of expansion than an oil hydraulic system, and allows precise movement. A 1:5 cartridge is incorporated to minimize drifting. The large, rigid driving unit enables fine movements and coarse manipulations and a sturdy ball joint is also used. Installation is made more rigid by securing attachments to the bar. The drum type control unit has a large handle for precise operation and high linear repeatability. Overall, design considerations are focused on precision movement and stability over long periods of time. This model set the standards for subsequent models of micromanipulators for patch clamping.
*For attachment to the microscope, a suitable adaptor is required (sold separately). *The micromanipulator can be mounted directly on the isolation table. *This model can be firmly fixed to any part of the isolation table with GJ-12 thin-type magnetic stand (sold separately). *AP-12A/AP-12L/AP-12N/AP-13-2 patch clamp headstage holders can be attached on the B-9 ball joint, incorporated in the manipulator . *Combining the ball joint that attaches the micromanipulator with MHW-4 single-axis water hydraulic micromanipulator enables four-dimensional remote controlled movement.
X30mm, Y30mm, Z30mm Full rotation of knob: approx. 4mm
Fine
X2mm, Y2mm, Z2mm Full rotation of knob: 50um Minimum graduation: 0.2um
Dimensions/Weight
Control unit
W115 x D115 x H132mm, 1.6kg
Drive unit
W155 x D155 x H100mm, 900g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Single-Axis Water Hydraulic Fine Micromanipulator (For Patch Clamp Work)
MHW-4:
$2,378.38
†
- Ships in 1-5 days
Narishige's MHW-4 is an add-on type single-axis water hydraulic micromanipulator, attachable to ball joint B-9.
Made for use with the MHW-3 in patch clamping applications, it offers excellent stability with minimal drifting.
2mm Full rotation of knob: 50um Minimum graduation: 0.2um
Dimensions/Weight
Control unit
W70 x D115 x H100mm, 1.15kg
Drive unit
W42 x D28 x H41mm, 60g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Single-Axis Water Hydraulic Fine Micromanipulator (For Patch Clamp Work) with wide movement 1:1
MHW-4-1:
$2,594.59
†
- Ships in 1-5 days
Narishige's MHW-4 is an add-on type single-axis water hydraulic micromanipulator, attachable to ball joint B-9.
This unit has a movement range type 1:1, for the 5:1 movement please refer to MHW-4.
2mm Full rotation of knob: 50um Minimum graduation: 0.2um
Dimensions/Weight
Control unit
W70 x D115 x H100mm, 1.15kg
Drive unit
W42 x D28 x H41mm, 60g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Micromanipulator with excellent microinjection performance under low magnifications. (Single-Axis Water Hydraulic System)
MWS-1A:
$3,243.24
†
- Discontinued
Narishige's MWS-1A is intended for performing microinjections under low magnifications using a stereomicroscope. This unit features a single-axis water hydraulic micromanipulator mounted on the MWS-1. Employment of a 1:1 cartridge system produces a movement range as wide as 10mm, so that the MWS-1A can be used for a wide variety of applications other than microinjection.
*For attachment to the microscope, a suitable adaptor is required (sold separately). *AP-14/AP-13-3 patch clamp headstage holders can be attached (sold separately)
Specification
Accessories included
H-1 Electrode Holder, Allen Wrench
Movement range
Coarse
X15mm, Y15mm, Z15mm
Fine
T10mm, Full rotation of knob 250um, Minimum graduation 1um
Dimensions/Weight
Control unit
W70 x D115 x H100mm, 1.15kg
Drive unit
W105 x D115 x H110mm, 370g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Micromanipulator ideal for patch clamping/blind patching using stereo microscopes. (Single-Axis Water Hydraulic System)
MWS-1B:
$3,351.35
†
- Discontinued
Narishige's MWS-1B is intended for patch clamping and blind patching applications under low magnifications using a stereo microscope. This combination presents a single-axis water hydraulic micromanipulator with a 1:5 cartridge system, mounted on the MWS-1. This provides precise movement toward the target area and good stability with minimal drift, all at an economical price.
*For attachment to the microscope, a suitable adaptor is required (sold separately). *AP-14/AP-13-3 patch clamp headstage holders can be attached (sold separately).
Specification
Accessories included
H-1 Electrode Holder, Allen Wrench
Movement range
Coarse
X15mm, Y15mm, Z15mm
Fine
T2mm, Full rotation of knob 50um, Minimum graduation 0.2um
Dimensions/Weight
Control unit
W70 x D115 x H100mm, 1.15kg
Drive unit
W105 x D115 x H110mm, 400g
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Three-Axis Water Hydraulic Micromanipulator
WR-6:
$7,783.78
†
- Ships in 1-5 days
Narishige's WR-6 is a three-axis water hydraulic micromanipulator that is highly recommended for patch clamping from the microscope stage slide.
Employing a water hydraulic system, which has a lower coefficient of expansion due to temperature changes, this model offers precise movement while minimizing drift by incorporating a 1:5 cartridge. In addition, it integrates both coarse and fine manipulation capabilities by featuring a manual coarse manipulator for each axis. The drum type control unit has a large handle for precise operation and high linear repeatability. Design considerations are focused on precision movement and stability over long periods of time. The WR-6 is outstandingly versatile: when set up, it is attached using a bar mount, but independent setup using a magnetic stand is also possible, as is attachment to the side of the microscope stage with an adaptor.
X2mm, Y2mm, Z2mm Full rotation of knob 50µm, Minimum graduation 0.2µm
Dimensions/Weight
Control Unit
W115 × D115 × H132mm, 1.6kg
Drive Unit
W110 × D60 × H140mm, 0.4kg
†
These are our list prices. If you are paying with an Institutional
Purchase Order or by check, you qualify for a 7.5% discount. Click
here
to change your payment method and see the lower prices.
Specification
By bonding the chamber frame onto the head of a rat, repeated fixations in the same position in an unanesthetized state have become possible. Once the chamber frame is fixed on the head, without the need for anesthetization, the rat can be stereotaxically fixed without using the mouth/nose clamp or ear bars, enabling the SR-10AR to be used for visual and/or auditory experiments.
By bonding the chamber frame onto the head of a rat, repeated fixations in the same position in an unanesthetized state have become possible. Once the chamber frame is fixed on the head, without the need for anesthetization, the rat can be stereotaxically fixed without using the mouth/nose clamp or ear bars, enabling the SR-10R to be used for visual and/or auditory experiments.
